i3-6100T compatible with a S1200SPL?
It's just not listed under the Compatible Products tab.
↧
i3-6100T compatible with a S1200SPL?
↧
Mi Server S5520SC no me reconoce el teclado USB no pasa de la pantalla precione F1 o F2 para entrar al SETUP que puede ser
Mi SMi Server S5520SC no me reconoce el teclado USB no pasa de la pantalla precione F1 o F2 para entrar al SETUP que puede ser
Mensaje editado por: WolfCuba Garcia
↧
↧
How to reset the superuser password for RMM2.
"Slight" problem. We lost the superuser password for one of our RMM2. I cannot find any procedure in any of the available documents, on how to reset the admin superuser password for this above module. Unfortunately no other users are defined on the RMM2.
Question: how to reset the superuser password on the RMM2? The server is physically accessible.
No jumpers on the RMM2
↧
Does S2600CP4 support E5-2689 SR0L6 processor? does it have IPMI builtin or I'll need the RMM 4 module?
Hi,
Does S2600CP4 support E5-2689 SR0L6 processor?
It's not listed in the compaible processor list but would like to make sure before purchase.
Also does the board have IPMI builtin or I'll need the RMM 4 module? RMM 4 or Lite or any will work?
Thanks,
↧
Help Me! Model S2600CP
Hello dear users! Help me please to launch my S2600СP server.
I have this problem:
It was installed system Windows Server 2008 x64 R2. Very noisy coolers and I decided to update the BIOS to automatically adjust the noise coolers. I downloaded the update "S2600CP_SFUP_BIOS02060002_ME020107328_BMC0125r9398_FRUSDR111" and set them with the windows command line. Update was successful, but after I turned off the server and turn it on again, it is no longer loaded, again noisy cooler and there is no signal on the monitor.
I read the instructions, move the jumper to position 2-3 and would like to install the BIOS firmware from the flash drive, but I did not work, writes: BIOS INSTALLED: SE5C600.86B.02.03.0003
Platform ID: S2600CP
And flashing cursor to the bottom, no processes not.
I ask your help, please tell me what should I do?
↧
↧
non standard ipmi commands
Is there a document that defines the non standard (oem?) IPMI commands for the use with the server board S2600WT2R.
I'm looking for how to access the I2C on a PCIe card to read some sensors on the board.
I'm using the ipmitool raw command.
↧
Intel BIOS Firmware update package DOESN'T support INTEL Xeon
Hello
Thank you for your email, see below.
Board E51976-406
Serial no: AZGP05000111
BMC 1.23
HSC0.00
ME 06.00.30.1119
SDR 0.18
BIOS S3420GP.86B.01.00.0046
BIOS Build date 09/29/2010.
Before proceeding with BIOS update for Intel® Server Board S3420GPLC reading the important notes section I see the following.
The system BIOS revision provided in this software update package does not include processor microcode to support any production Intel(R) Xeon(R) processors.
Also when running EFI I'm advised to run BMC & FRUSDR before updating the BIOS. I didn't proceed to install update.
I'm TOTALLY confused. I have Xeon processor.
If I install S3420GPLX/LC Firmware Update Package for EFI fully package how will this affect Xeon processor?
Thank you for your help.
Hello Christopher,
Thank you for your email. I do not
see an S3420GPC board in the ARK product catalog, but the S3420GP TPS document
refers to the LC SKU as “S3420GPC”, so what you have may be the S3420GPLC: http://www.intel.com/content/dam/support/us/en/documents/motherboards/server/s3420gp/sb/s3420gp_tps_r2_4.pdf
You can download the BIOS update from
the “Download Drivers” menu option on the left side of the product page.
http://ark.intel.com/products/46533/Intel-Server-Board-S3420GPLC
If you do not see the software you are
looking for in the ARK driver list, you can search the Intel Download Center
website for your board model to see more options.
https://downloadcenter.intel.com/
If you require further assistance, Intel
Customer Support can be reached through the following site:
http://www.intel.com/content/www/us/en/support/contact-support.html
Regards,
Lori Yung
ARK Support
- ark.intel.com
↧
Motherboard s5520ur need a RAID controller (Материнская плата s5520ur нужен RAID контроллер)
Eng: Motherboard s5520ur need a RAID controller which supports SAS hard disk volumes 1,8Tb, currently worth Raid Controller RS2BL080 he does not find them. Tell me which controller is suitable for this motherboard?
RUS: Материнская плата s5520ur нужен RAID контроллер который поддерживает жесткие диски SAS объемем 1,8Тб, на данный момент стоит RAID контролер RS2BL080 он их не обнаруживает. Подскажите какой контроллер подойдет для этой материнской платы?
↧
1600 URHSR Motherboard, video driver for Windows2003 x64
We have a lot of application errors in terminal server. They are connected with ntdll.dll. Google says that display driver may be a possible cause. Now we use Standard VGA adapter (vgapnp.sys) and device manager shows no errors. I downloaded from Intel Infinst_autol.zip - with a lot of inf and cat files. Which one of them is display driver?
Thanks for any Help.
↧
↧
swapping Intel raid cards- porting RAID arrays
Hi Everyone
I have an Intel RAID card RT3WB080 which has two RAID5 arrays of 4 x3TB drives each, total 8 drives, installed on my workstation.
I have a spare Intel RAID card RS2WG160 with SSD cache key installed, that supports upto 16 drives.
I want to port my 2 RAID arrays to the spare card on the same desktop and expand the array.
Is this possible without destroying / recreating the array.
Look forward to your input and suggestions.
Thanks
Gurvesh
↧
Upgrading S5520SCR Motherboard ...rank limits?
I am upgrading an older system for graphics, Photoshop/Premiere.
Some RAM concerns; they are readily available as Dual Ranked 4x or 8x. But I can't find the motherboard limits on total ranks. ...Having trouble understanding some specs...
Am also told on other forums that although not listed as beyond DDR3 1333 capable, DDR3 1600 will work. 1600 are all that are readily available.
With twelve slots I would like to run twelve "DDR3 PC3-12800 • CL=11 • Dual Ranked • x8 based • Registered • ECC • DDR3-1600 • 1.35V • 1024Meg "
They are available as 8x or 4x, both Dual Ranked.
A bit more info: 'am still investigating all possibilities, but hope/intend to upgrade from DualE5620 2.4GHz Dual Quad processors up to 5690's.
From a nvidia FX1800 card to a GTX 980 Ti Hybrid graphics card.
And from a WD Veloci Raptor SATA HD to a 1Tb WD Blue Pc SSD
An obvious novice, any help, cautions, suggestions will be appreciated!
Thank you.
↧
Jbod with S3420GPLC on board raid?
I have a client running Windows Server 2008 on an S3420GPLC system board with two 150G WD Raptor drives in RAID1
using the embedded RAID controller setting in BIOS. .
The client is running ACT 2012 CRM and lately the performance is very slow.
I'd like to add an SSD drive to the system so that it comes up as D: and is not a part of any RAID. I plan to move the ACT
indices folder (contains index files for the ACT application running SQL server express 2008) to the SSD D: drive to try to improve ACT performance.
Can I connect the SSD to the on-board controller and get this working? If not, what do I need to add SSD connection via PCI slot?
↧
Server Board S2600CW2SR support SAS Hdd and RAID 5
Hi There,
Will Intel® Dual Server Board S2600CW2SR support SAS 600GB 15K RPM HDDs and also want to know about implementing RAID 5 on this board. Since this board comes with RAID 0,1 and 10. can anyone help me out with this.
↧
↧
S2400SC BIOS Update Failure
Trying to update board from R02.02.0002 to R02.05.0004 or R02.06.0005 but receive the attached error. BMC updated fine. Any help would be appreciated.
↧
Intel server board S1200SPL RSTe software causes BSOD in Windows server 2012 R2
Hi geeks,
I got Windows server 2012 R2 installed in Intel server board S1200SPL successfully, and all drivers are up to date. the latest drivers are from link Downloads for Intel® Server Board S1200SPL . but when I open Rapid Storage Technology Enterprice software, BSOD occurs with error : DRIVER_IRQL_NOT_LESS_OR_EQUAL(iaStorA.sys). people recommended to downgrade the driver, which I have tried, but it still does not work.
In BIOS settings I chose RAID -> RSTe not AHCI, cuz I need to set RAID5 for storage partition.
Thanks in advance.
Regards,
Terrence
↧
S1200V3RPS Windows Server 2016
Hi!
Im about to reinstall my server from 2012r2 to 2016, does anyone know if this will work? I cant find any drivers for Windows Server 2016 on the support page.
↧
How do I update the BIOS on a very old S2600CP motherboard?
Hi,
I've just been given an ancient, refurbished S2600CP2J motherboard complete with CPUs and RAM and would like to get it fully working again.
The obvious first step is to update the BIOS but the oldest EFI update package available (01.02.003) states that I need to have at least version 01.01.1002 before starting or "the update process may render the system not operatable!"
According to the BIOS screen, my system is currently SE5C600.86B.99.99.x034, build date 08/23/2011.
As I have no wish to kill the system before I get started, is there any way of upgrading it to 01.01.1002 as a minimum?
Thanks.
↧
↧
Intel RAID RMS25KB040 but I do not get the BIOS access Cntrl+C
I have a Dell Precision 3420 PC which already has a RAID 1 installed via Rapid Store Technology and windows 7. I am going to install VMWare ESXi but it does not support "software" RAID. So I purchased an RMS25KB040 RAID controller and installed it. On boot, I do not see the option to get into the BIOS (Cntrl+C). Would anyone know why? I am concerned that this LSI chipset is not supported by this motherboard. I also wondered if I would have to Disable the RAID on the Main Board? Is it possible that the on-board RAID is stopping the newly installed RMS25KB040 RAID controller from working.
↧
All power supplies has "Unknown Device"
All power supplies has "Unknown Device"
SCM1, SCM2, SWM1, SWM2 removed for testing...
↧
s5520sc not efi boot
s5520sc not efi mode booting
efi optimized boot enable,
use Legacy bideo for efi os enable
not video output
↧