Quantcast
Channel: Intel Communities : Discussion List - Servers
Viewing all 3923 articles
Browse latest View live
↧

"The virtual disk has not been initialized. Running a consistency check may result in inconsistent messages in the log. Are you sure youwant to contimue?"

February 26, 2016, 10:20 am
$
0
0

We are running a Windows Server 2012 R2 standard with Intel Embedded Server RAID Technology II storage controllers. Disk Management says that the drives are healthy but are getting some disk errors in event viewer. When we run the Intel RAID Web Console 2 utility consistency check we get the follow popup window "The virtual disk has not been initialized. Running a consistency check may result in inconsistent messages in the log. Are you sure you want to continue?"

Why would that be if disk manger says the drives are healthy?

↧
Search

s1200btl bmc Power Statistics shows 0w

February 18, 2016, 12:05 pm
$
0
0

Capture.JPG

 

Is it anything special that is needed to be done?

↧
↧

Intel Raid on S5500BC

February 27, 2016, 11:11 pm
$
0
0

Hello everyone,

    I am trying to migrate Windows Server 2008 from AHCI to RAID on board S5500BC, I downloaded the ERT2 driver from intel, and when i want to add a new hardware, then browse for the driver, the driver isnt detected ! i tried enabling megasr in the system registry and still windows starts with BSOD, is there a driver or a workaround to solve this issue, i dont know if i am in the right community

 

Regards

↧

S1200BTL not able to POST with NVMe attached

February 28, 2016, 4:00 am
$
0
0

Hi all,

 

I am trying to install an NVMe (samsung 950 pro) device into a S1200BTL motherboard with a Xeon E3 processor. The system posts fine without the device but if I attach it, the system will fail to POST. I have updated to the latest firmware but still no luck. I tried installing this in another sandy bridge based system and it works without a problem.

 

Any suggestions?

 

Thanks!

Chris

↧

SS4200 E All Drives Failed?

October 16, 2009, 10:29 am
$
0
0

I have been running the SS4200 e for about 1 month with no problems. It is populated with 4x1TB (Parity RAID) hard drives and over the past month have consolidated all my backups, etc onto it. So far I was impressed!

 

Today I found I couldn't access any files and when I looked on the dshboard it said "Faulted" and wants me to overwrite all the data. The LEDs on the front (the 4 drive indicators and the power light) are all solid Amber (not blinking).

 

1.png

 

 

Ooooh. Not good. Looking at the drives they cannot all have failed (4 brand new drives 1 month old...impossible!). But according to the following screen they have!

 

2.png

 

I have tried resetting (including fatory reset) and powering off completely but its still the same. I have 1.6 TB of data on them.

I could maybe understand 1 or even 2 drives failing, but all 4? I've ordered 2 more drives which should arrive tomorrow, but that won't help me get all the data

off.

 

Any suggestions?

↧
↧

Can anyone please suggest whether below listed applications are compatible with Windows Server 2008 R2 and Windows Server 2012 R2?

March 2, 2016, 10:08 pm
$
0
0
Windows Driver Package - Intel System  (01/19/2006 1.2.43.0)01/19/2006 1.2.43.0
Intel(R) Network Connections12.4.0.0
Intel(R) Network Connections14.3.0.0
Intel(R) Network Connections13.1.0.0
Intel(R) Network Connections14.0.0.0
Intel(R) Network Connections17.1.0.0
Intel(R) PROSet for Wired Connections9.20.0000
Intel(R) PROSet for Wired Connections7.10.0000
Intel(R) LAN Adapters SNMP Agent1.00.0000
Intel(R) PRO Network Connections10.30.0000
Intel(R) PROSet for Wired Connections7.10.1000
Intel(R) PROSet6.05.2001
Intel(R) PRO Network Connections12.2.0.0
Windows Driver Package - Intel (E1000) Net  (03/25/2007 8.9.1.0)03/25/2007 8.9.1.0
Windows Driver Package - Intel (e1express) Net  (06/19/2007 9.9.13.0)06/19/2007 9.9.13.0
Windows Driver Package - Intel (e1qexpress) Net  (06/20/2007 10.0.23.0)06/20/2007 10.0.23.0
Intel(R) Network Connections13.5.0.0
Intel(R) Network Connections15.5.0.0
Intel(R) PRO Network Connections10.20.0000
Intel(R) PRO Network Connections11.2.0.0
Intel(R) PRO Network Connections SNMP Agent1.30.0000
Intel(R) Graphics Media Accelerator Driver6.14.10.5303
Intel(R) C++ Compiler 7.17.1.0000
Intel(R) Processor ID Utility4.22.0000
Intel(R) Dialogic(R) System Release 6.0 PCI Redistributable Edition6.1.74
Dialogic(R) System Release 6.0 PCI Redistributable Edition6.1.181
Intel® Dialogic® System Release 6.0  Redistributable Edition6

       

↧

S1200BTL chassis fan running full speed

June 1, 2012, 10:42 am
$
0
0

Hello,

 

I have an S1200BTL motherboard and an P4303xxsfcnna chassis.  I've used Intel Deployment Assistant to update BIOS, BMC, FRU, etc.  The chassis fans are still running at full speed.  The BIOS only has an option to change to altitude, but the fan speed is set to auto and cannot be configured.

Any reason why the fans would be running full speed on both of my systems?

Thanks

↧

CPU fans at 100% on S5500BC in "other" chassis

March 4, 2016, 8:50 am
$
0
0

Hi,

 

I recently bought a S5500BC on ebay and its doing its job well. But the fans are allways at 100% and i would prefer a little bit more silence. I have updated my firmware (incl. BIOS) and nothing changed. I found a post about fan speeds in non-intel chassis (Found the solution to loud fans when using "other chassis" option when updating Firmware on a server board) but if i look in my BC_BMC.sdr i cannot find 100% aka 64h settings. Does anyone knows what i need to change in my config?

 

//=========================================================================//

// Chassis Fan Control Domain 1 with profile 6,7 for Minimum

// For Other Chassis (Medium ramp)

// Fan Control Domain Number #1 (PWM0: Processor1&2 Fan)

//====================================================================// 

_SDR_TYPE      C0

_SDR_TAG       'OTHER_MR'

_REC_LEN       001F

// Sensor Record Header

   00BD               // Record ID

   51                 // SDR Version

   C0                 // Record Type

   1A                 // Record Length

 

 

   // Record Body Bytes

   570100             // Manufacturer ID

   0C                 // Record Subtype Value (Fan Speed Control SDR Record, rev 2)

 

 

   // Temperature Fan Control Record

   01                 // Record Version

   01                 // Fan Control Domain Number #1 (PWM0: Processor1&2 Fan)

   14                 // Normal Control Value (14h = PWM 20%)

   FF                 // Boost Control Value (FFh = use boost sub record)

   01                 // Ramp Step (1=1%)

   02                 // Scan Rate (2 Cycles)

   C0                 // Fan Profile Support = 11000000

 

 

   // Stepwise Linear type Temperature Sensor Sub-record

   20                 // Sensor Owner ID

   20                 // Temperature Sensor Number -- (BB Amb)

   64                 // Temp Sensor failure control Value (64h = PWM 100%)

   00                 // Sleep Control Value

   41                 // [7:6]-Supported in S1 (1=yes); [5:3]-Reserved; [2:0]-Control Type (001b=Stepwise linear)

   10                 // Temperature Info [7]-Reserved; [6]-Domain Maximum=0; [5:3]-Negative Hysteresis=2; [2:0]-Positive Hysteresis=0

//------------------------------------------------------------------//

   04                 // Count of Temperature/Control Value Pairs (04h=4)

  

   00                 // Temperature 1 0c

   33                 // Control Value 1 (Percentage) (33h = PWM 51%)

  

   14                 // Temperature 2 20c

   33                 // Control Value 2 (Percentage) (33h = PWM 51%)

  

   1E                 // Temperature 3 30c

  33                 // Control Value 3 (Percentage) (33h = PWM 51%)

  

   3C                 // Temperature 4 60c

   64                 // Control Value 4 (Percentage) (64h = PWM 100%)

Also i am not sure which entries to alter and which not. Would appreciate any help,

 

SinTh0r4s

↧
Search

W2600CR won't Boot post code 35h

March 4, 2016, 3:29 am
$
0
0

Hi

 

I have purchased an Intel W2600CR board - PBA G21602-306 and cant get it to boot.

It either comes up with Orange System Status LED and LSB lit or I get Green System Staus LED and post code 35h (LSB,#2,#4,#5).

 

I have tried a single E5-2670 and dual E5-2670 CPUs. (V1 CPUs)

If I remove the memory I get 3 beeps as expected.

The memory I have in is Hynix 4GB 2Rx4 PC3-10600R-9-10-E1 at the moment just a single DIMM.

But I have aslo tried up to 4 DIMS from my Dell C6100 with no success.

 

Any advice appreciated.

↧
↧

Raid Web Console doesn't see raid

April 30, 2010, 12:21 am
$
0
0

Hello,

 


Hello

 

    I work on windows server 2003 with controller Intel SRCSAS18E. I installed Raid Web Console 2 but I didn't see my raid. I try few times with different type of instalation (standalone, client, server). I have also second server with the same software and controller, there everthing work fine. I also installed raid web console on my host but result is the same. What should I have to do ?

↧

S1200BTL option rom control greyed out

March 5, 2016, 5:31 pm
$
0
0

Hi all,

 

I'm assembling a new system based on a S1200BTL board. It's inside a Supermicro chassis.

 

I need to deactivate the oprom of a specific PCIe card, but the option rom control in "advanced/PCI Configuration/PCI port Oprom Control" are all greyed out.

 

What am i missing?

 

thank you

↧

INTEL S5000VSA Error code: 0x0000005D Your Pc needs To Reboot

March 5, 2016, 5:53 pm
$
0
0

Hello Hope Anyone can help me here.


Am Trying To Install Windows Server 2012 RC On My Server Having 8GB Ram & Intel Xeon E5420 @ 2.50GHz

And Am Getting This Error


Error code: 0x0000005D Your Pc needs To Reboot

Execute Disable Bit Is Enabled Tried To Disable It, Same Error


Bios Version : S5000.86B.10.00.0084 Build 10/17/2007

Intel Server Board S5000VSA - E11003-200


i have contacted Microsoft forums and redirected me to here. told me to use the Deployment Assistant CD - And Update The Bios maybe it`ll work -


as i have read about the CPU its 64bit and am installing Windows Server 2012 RC which is 64bit not working.


i have tried installing windows 10 32Bit it worked


hope anyone can help me with this issue please

Thank You

↧

SFP+ transceivers and twinaxial cables supported by the Intel X710DA2

March 6, 2016, 2:13 am
$
0
0

Hi, I need to know what models of Intel (or other brands) SFP+ transceiver modules and twinaxial cables are fully supported and compatible with the Intel X710DA2 converged network adapter. I searched through the Intel website to try and find some Intel branded ones but could only find modules and cables that the website said are only compatible with the Intel X520 converged network adapters. Thanks in advance for any info.

↧
↧

S5000VSA CPU not showing

March 6, 2016, 3:32 am
$
0
0

Hi,

I bought few months ago used server with Intel board S5000VSASASR. It was originally equipped with two Xeon 5030 and 4 GB of RAM. Both CPUs working. Then I was working on some projects and didn't have time to watch if everything if OK or not. Then out of the blue I noticed I have only one CPU. Which seemed strange, so I tried updating BIOS, tried everything like cleaning CPU slots, change heat transfer paste, but nothing helped. So I decided to buy new CPU since they are really cheap. I choose 5405 - bought two of them and still the same problem. Both CPUs are working, since only one is showing no matter how I switch them. But the strange thing is - BIOS is showing only CPU in SLOT 2. Which the board shouldn't be able to do. Can you point me what could be wrong and which utility install to troubleshoot what is wrong? Thanks a lot!

↧

What is the successor for the S5520SC Motherboard?

March 7, 2016, 3:27 pm
$
0
0

HI,

 

I have an SC5600 chasis and two E5645 processors. I recon that my current motherboard supports a certain level of hardware upgrades.

If I only want to replace my motherboard and keep the chasis and the processors, what motherboard should I buy as a more recent version (supports DDR5 for example)?

 

Thanks!

↧
Search

Need help on "Error while reading from the disk" on SSD error

March 7, 2016, 4:42 pm
$
0
0

Hello,

We have a system with followed configuration,

CPU Type: Intel(R) Xeon(R) CPU E5-2667 v3 @ 3.20GHz X 2 //Dual CPUs

Motherboard Name: X10DAI

Motherboard Version: 1.01

Total Physical Memory: 65411MB Kingston RAM

BIOS Manufacturer: American Megatrends Inc

SSD: INTEL SSDSC2BW240H6 , 240GB, Intel 535 Series

Operating System: Windows 7 Professional 64 Bit

 

Our operating system is installed on SSD,

 

Problem is when we run BurnInTest, we gets following error

 

Test Name                   Cycles   Operations       Result  Errors   Last Error

Disk (C:)                       13537    69.230 Trillion  FAIL     1          Error while reading from the disk

 

By changing new SSD also we get same error.

What could be the reason, Problem with OS/SSD Lot or OS compatibility on SSD issue?

Please help us to solve our problem.

 

Thanks in Advance.

 

Regards,

Pragnesh Virani

↧

Server board s2600cw2 and Crossfire compatibility

March 8, 2016, 1:50 am
$
0
0

I'm trying to enable AMD crossfire on a S2600CW2 without luck.

Depending on the manual version i find this sentence.

"The server board supports up to three full length full height double-width PCIe cards on slot 2, slot 4, and slot 6, and supports 2-way and 3-way Nvidia* SLI and ATI* CrossFire cards"

Before I spend anymore time on this, i would like a definite answer if it is possible. Does anyone know?

↧
↧

BIOS/RAID BIOS screen would hold about one second, then system would run into black screen.

March 8, 2016, 1:55 am
$
0
0

 

Recently, one HD (RAID 5) has broken, and we reboot the machine.

 

But after the reboot, we cannot boot into BIOS & RAID BIOS, also cannot boot into OS either. BIOS/RAID BIOS screen would hold about one second, then system would run into black screen.

 

↧

CPU fans at 100% on S5500BC in "other" chassis

March 4, 2016, 8:50 am
$
0
0

Hi,

 

I recently bought a S5500BC on ebay and its doing its job well. But the fans are allways at 100% and i would prefer a little bit more silence. I have updated my firmware (incl. BIOS) and nothing changed. I found a post about fan speeds in non-intel chassis (Found the solution to loud fans when using "other chassis" option when updating Firmware on a server board) but if i look in my BC_BMC.sdr i cannot find 100% aka 64h settings. Does anyone knows what i need to change in my config?

 

//=========================================================================//

// Chassis Fan Control Domain 1 with profile 6,7 for Minimum

// For Other Chassis (Medium ramp)

// Fan Control Domain Number #1 (PWM0: Processor1&2 Fan)

//====================================================================// 

_SDR_TYPE      C0

_SDR_TAG       'OTHER_MR'

_REC_LEN       001F

// Sensor Record Header

   00BD               // Record ID

   51                 // SDR Version

   C0                 // Record Type

   1A                 // Record Length

 

 

   // Record Body Bytes

   570100             // Manufacturer ID

   0C                 // Record Subtype Value (Fan Speed Control SDR Record, rev 2)

 

 

   // Temperature Fan Control Record

   01                 // Record Version

   01                 // Fan Control Domain Number #1 (PWM0: Processor1&2 Fan)

   14                 // Normal Control Value (14h = PWM 20%)

   FF                 // Boost Control Value (FFh = use boost sub record)

   01                 // Ramp Step (1=1%)

   02                 // Scan Rate (2 Cycles)

   C0                 // Fan Profile Support = 11000000

 

 

   // Stepwise Linear type Temperature Sensor Sub-record

   20                 // Sensor Owner ID

   20                 // Temperature Sensor Number -- (BB Amb)

   64                 // Temp Sensor failure control Value (64h = PWM 100%)

   00                 // Sleep Control Value

   41                 // [7:6]-Supported in S1 (1=yes); [5:3]-Reserved; [2:0]-Control Type (001b=Stepwise linear)

   10                 // Temperature Info [7]-Reserved; [6]-Domain Maximum=0; [5:3]-Negative Hysteresis=2; [2:0]-Positive Hysteresis=0

//------------------------------------------------------------------//

   04                 // Count of Temperature/Control Value Pairs (04h=4)

  

   00                 // Temperature 1 0c

   33                 // Control Value 1 (Percentage) (33h = PWM 51%)

  

   14                 // Temperature 2 20c

   33                 // Control Value 2 (Percentage) (33h = PWM 51%)

  

   1E                 // Temperature 3 30c

  33                 // Control Value 3 (Percentage) (33h = PWM 51%)

  

   3C                 // Temperature 4 60c

   64                 // Control Value 4 (Percentage) (64h = PWM 100%)

Also i am not sure which entries to alter and which not. Would appreciate any help,

 

SinTh0r4s

↧

W2600CR won't Boot post code 35h

March 4, 2016, 3:29 am
$
0
0

Hi

 

I have purchased an Intel W2600CR board - PBA G21602-306 and cant get it to boot.

It either comes up with Orange System Status LED and LSB lit or I get Green System Staus LED and post code 35h (LSB,#2,#4,#5).

 

I have tried a single E5-2670 and dual E5-2670 CPUs. (V1 CPUs)

If I remove the memory I get 3 beeps as expected.

The memory I have in is Hynix 4GB 2Rx4 PC3-10600R-9-10-E1 at the moment just a single DIMM.

But I have aslo tried up to 4 DIMS from my Dell C6100 with no success.

 

Any advice appreciated.

↧
Viewing all 3923 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>