我刚准备定制一台电影制片工作站，可是今年停产工作站主板了，这是怎么回事，官网也没发布替代方案，敬请释疑！
i am planning order a movie production workstation , but guess what , the last workstation board w2600cr will be discontinued in 2015 !
and that is it , no more official news on this .
somebody tell me what shall i do , pls !
Using ipmitool, I accidentally deleted the "FRU Product Serial Number" field from the FRU on my Intel S2600 server. To fix this, I followed the instructions in http://download.intel.com/support/motherboards/server/sb/updating_frusdr_on_epsd_server.pdf (section 2.6) and attempted to update the SDR and FRU. As I was about to enter values for the product info area, the process failed on me (see attachment). How can I reset the FRU on this board?
Below is the output from running ipmi-fru -h ip6-localhost:
====================================
Baseboard (ID 00h)
FRU Chassis Type: Rack Mount Chassis
FRU Chassis Part Number: ..................
FRU Chassis Serial Number: ..................
FRU Chassis Custom Info: ...............................
FRU Chassis Custom Info: ...............................
FRU Board Manufacturing Date/Time: 11/04/13 - 13:06:00
FRU Board Manufacturer: Intel Corporation
FRU Board Product Name: S2600GZ
FRU Board Serial Number: QSGR34400538
FRU Board Part Number: G29051-354
FRU FRU File ID: FRU Ver 0.01
FRU Product Manufacturer Name: Intel Corporation
FRU Product Name: S2600GZ
FRU Product Part/Model Number: ..........
FRU Product Version: abcde
FRU Product Asset Tag: abcde
FRU Inventory Device: Pwr Supply 1 FRU (ID 02h)
FRU Product Manufacturer Name: DELTA
FRU Product Name: DPS-750XB A
FRU Product Part/Model Number: E98791-010
FRU Product Version: 05
FRU Product Serial Number: E98791D1426112775
FRU Power Supply Overall Capacity: 750 Watts
FRU Power Supply Peak VA: 1744 VA
FRU Power Supply Max Inrush Current: 55 Amps
FRU Power Supply Inrush Interval: 5 ms
FRU Power Supply Low End Input Voltage 1: 100000 mV
FRU Power Supply High End Input Voltage 1: 127000 mV
FRU Power Supply Low End Input Voltage 2: 200000 mV
FRU Power Supply High End Input Voltage 2: 240000 mV
FRU Power Supply Low End Acceptable Frequency: 47 Hz
FRU Power Supply High End Acceptable Frequency: 63 Hz
FRU Power Supply A/C Dropout Tolerance: 12 ms
FRU Power Supply Predictive Fail Support: Yes
FRU Power Supply Predictive Fail: Tach output, two pulses per rotation
FRU Power Supply Power Factor Correction Supported: Yes
FRU Power Supply AutoSwitch Supprt: Yes
FRU Power Supply Hot Swap Support: Yes
FRU Power Supply Peak Capacity: 850 Watts
FRU Power Supply Hold Up Time: 12 s
FRU Power Supply Voltage 1: 12V
FRU Power Supply Voltage 2: 12V
FRU Power Supply Total Combined Wattage: 0 Watts
FRU DC Output Output Number: 1
FRU DC Output Output on Standy: No
FRU DC Output Nominal Voltage: 12000 mV
FRU DC Output Maximum Negative Voltage Deviation: 11400 mV
FRU DC Output Maximum Positive Voltage Deviation: 12600 mV
FRU DC Output Ripple and Noise pk-pk: 120 mV
FRU DC Output Minimum Current Draw: 0 mA
FRU DC Output Maximum Current Draw: 62000 mA
FRU DC Output Output Number: 2
FRU DC Output Output on Standy: Yes
FRU DC Output Nominal Voltage: 12000 mV
FRU DC Output Maximum Negative Voltage Deviation: 11400 mV
FRU DC Output Maximum Positive Voltage Deviation: 12600 mV
FRU DC Output Ripple and Noise pk-pk: 120 mV
FRU DC Output Minimum Current Draw: 0 mA
FRU DC Output Maximum Current Draw: 1500 mA
FRU Inventory Device: Pwr Supply 2 FRU (ID 03h)
FRU Product Manufacturer Name: DELTA
FRU Product Name: DPS-750XB A
FRU Product Part/Model Number: E98791-009
FRU Product Version: 04
FRU Product Serial Number: E98791D1349177515
FRU Power Supply Overall Capacity: 750 Watts
FRU Power Supply Peak VA: 1744 VA
FRU Power Supply Max Inrush Current: 55 Amps
FRU Power Supply Inrush Interval: 5 ms
FRU Power Supply Low End Input Voltage 1: 100000 mV
FRU Power Supply High End Input Voltage 1: 127000 mV
FRU Power Supply Low End Input Voltage 2: 200000 mV
FRU Power Supply High End Input Voltage 2: 240000 mV
FRU Power Supply Low End Acceptable Frequency: 47 Hz
FRU Power Supply High End Acceptable Frequency: 63 Hz
FRU Power Supply A/C Dropout Tolerance: 12 ms
FRU Power Supply Predictive Fail Support: Yes
FRU Power Supply Predictive Fail: Tach output, two pulses per rotation
FRU Power Supply Power Factor Correction Supported: Yes
FRU Power Supply AutoSwitch Supprt: Yes
FRU Power Supply Hot Swap Support: Yes
FRU Power Supply Peak Capacity: 850 Watts
FRU Power Supply Hold Up Time: 12 s
FRU Power Supply Voltage 1: 12V
FRU Power Supply Voltage 2: 12V
FRU Power Supply Total Combined Wattage: 0 Watts
FRU DC Output Output Number: 1
FRU DC Output Output on Standy: No
FRU DC Output Nominal Voltage: 12000 mV
FRU DC Output Maximum Negative Voltage Deviation: 11400 mV
FRU DC Output Maximum Positive Voltage Deviation: 12600 mV
FRU DC Output Ripple and Noise pk-pk: 120 mV
FRU DC Output Minimum Current Draw: 0 mA
FRU DC Output Maximum Current Draw: 62000 mA
FRU DC Output Output Number: 2
FRU DC Output Output on Standy: Yes
FRU DC Output Nominal Voltage: 12000 mV
FRU DC Output Maximum Negative Voltage Deviation: 11400 mV
FRU DC Output Maximum Positive Voltage Deviation: 12600 mV
FRU DC Output Ripple and Noise pk-pk: 120 mV
FRU DC Output Minimum Current Draw: 0 mA
FRU DC Output Maximum Current Draw: 1500 mA
FRU Inventory Device: Front Panel (ID 04h)
FRU Board Manufacturing Date/Time: 09/05/13 - 12:26:00
FRU Board Manufacturer: Intel Corporation
FRU Board Product Name: F2U8X35HSBP
FRU Board Serial Number: QSRU33507189
FRU Board Part Number: G43195-150
FRU FRU File ID: FRU Ver 0.02
FRU Inventory Device: HS Backplane 1 (ID 05h)
FRU Error: board info area checksum invalid
====================================
thanks
Hi
We have a S5000PAL Mainboard with a SROMBSAS18E RAID Controller.
A SAS-Midplane for SR2500 (with 6 Disks)
The RAID Controller is broken, but I have a spare HW Raid Controller Adaptec 6805E.
Can I replace the SROMBSAS18E RAID Controller with this one?
And how to connect the HW Raid Controller Adaptec 6805E (could not find any docu)
Many thanks
i have S2600CP2 server board
this is operating in a custom chassis with 9 cooling fan with pwm control pin ( STS200C CPU cooler 2ea / system fan 6ea / rear fan 1ea)
can i control the fan speed through ipmitool or anything, without change the pwm offset value in bios?
I have a client with running win Server 2003, with an error message RAID volume is degraded because of failed hard drive....I have purchased a Seagate drive identical to the filed one, what next? I hope this is the proper forum for this question.
Hi~
Is PMBus in S2600CP server board connected to CPU's I2C bus or IPMI?
If PMBus is connected to IPMI, which IPMI commands we can use to monitor and control it?
Would you show any example?
Thanks, in advance
Hi,
I have network problem with my Intel MFSYS22 (Current Build Version: 6.10.100.20120307.34729) Switch module.
| Product Name | Gigabit Ethernet Switch |
| Manufacturer | Intel Corporation |
| Manufacture Date | 2008-02-03 10:40:26 PM |
| Part Number | D70739-404 |
| Serial Number | BZTC80500085 |
| Asset Tag | |
| Up Time | 0 days 0:46:35 |
| Product ID | INTEL_SM |
| HW Version | D70739-404 |
| Boot Version | 1.0.0.6 |
| SW Version | 1.0.0.27 |
Once or twice a day it loses network connectivity on external and internal ports. It's status becomes "Unmanageable" until I remove it from chassis and put it back.
This issue start about month ago, but for first time it loses network connectivity once at 10 days. Now it loses twice times for a day.
How can I resolve this issue?
Hi,
I have a S1200BTL + RMM 4 Lite running ESXi 5.5 (Free). As I plug in the RMM4 Lite module, the 82574L NIC (NIC 1) is doing only 100Mbit/s (OS). When I pull out the RMM 4 Lite, then it goes up to 1000Mbit/s. Is this behavior normal? I thought the remote console/KVM will do 100Mbit/s, but the OS will still get 1000Mbit/s?!
Thanks
Arkadius
Hi there,
what is the right approach to retrieve the NIC 1 MAC address (for OS usage) via IPMI?
NOTE: I am assuming the system is powered off and that a DHCP server assigned an IP address to the BMC LAN channel 1.
The S2600GZ technical product specification section 6.10.3.2.3 highlights the convention used to assign MAC address so conceptually one could calculate it from the BMC LAN channel 1 MAC address (by subtracting 4) but that seems brittle so I am looking for the (raw) IPMI command to provide that info directly!?
Other vendors implemented vendor-specific IPMI commands but I can't seem to find the doc that would cover an S2600GZ board..
Thanks & cheerio, Harry.
我刚准备定制一台电影制片工作站，可是今年停产工作站主板了，这是怎么回事，官网也没发布替代方案，敬请释疑！
i am planning order a movie production workstation , but guess what , the last workstation board w2600cr will be discontinued in 2015 !
and that is it , no more official news on this .
somebody tell me what shall i do , pls !
Hi,
Do anyone know if RS2BL080 raid controller support new 6TB SATA3 disks?
/Markku
Hi everyone... I have a problem, I build a serverboard s5520sc in the sc5299ws chassis, and now my fan speed are very very high, bios and firmware already update, somebody have idea for me?
Thanks...
Hi,
I need to convert a couple of RAD5 LUNS to RAID 10. We have not got the Intel® Modular Server Storage Management Pack. However I believe that I can use this for 30 days in evaluation. Are there any limitations with it in evaluation.
Also does anyone know if its possible to re-size a LUN so that it is smaller?
Thanks,
Mark
Hi,
Please let me know ipmitool raw command for controlling S2600CP Fans?
Could you show me the examples of ipmitool raw command for controlling fans in S2600CP board?
Thanks in advance,
One of my friends sent me an Intel s5500BC Server for troubleshooting. He installed a Seagate Barracuda 3TB hard disk in it. However, when he installed Windows Server 2008 R2 64-bit on it, the accessible hard disk capacity was just around 2.2 TB. I tried to resolve it and through internet searches came to know that it was due to the MBR partition's restriction. I upgraded the BIOS to version 63, downloaded from Intel's website. I also created an EFI bootable flash drive containing the OS. I was able to boot with it in EFI mode and start the Windows setup. I also cleaned the drive and converted it to GPT, but when the setup starts copying the file, the system restarts. I had spent 3 in resolving the problem but unable to get any success. Can anybody help in sorting it out ?
Thanks.
Hi all,
I recently upgraded the firmware of a working S2600CP2 server running VMWare ESXi 5.5 build 1474528 and VMWare now gets stuck on the initialization of ACPI. After about a minute or two of being stuck on the initialization of ACPI, the server reboots as if the reset button was pushed on the front of the server, basically resulting in a boot-loop.
System BIOS - 02.02.0002
ME Firmware - 02.01.07.328
BMC Firmware - 01.20 r5446
FRUSDR - 1.10
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=23610&keyword=S2600Cp&lang=eng
Here is a screenshot of the server info after the upgradepboot
Vmware hang screen-shot
Hi all
Have been searching for answer before I posted, have kind of found an answer but need some clarification as well.
So I run a S5520HC board with RS2BL080 controller, I have the 4 and 6 drive hot swap bays.
My current configuration is 2x 600GB SAS (RAID 1) for my OS and 8x 300GB SAS (RAID 10) for whatever else.
I want to replace my 300GB SAS drives with higher capacity drives but will only do this if I can once again have a RAID 10 VD. How would I go about configuring this?
I would ideally like to install 8x 600GB SAS and if budget allows go for a 6x 800GB SSD.
To be able to compare different fan setups I'm logging the temperatures of my drives. All drives are connected to an Intel RAID Controller RS25DB080. Using storcli (storcli64) or CmdTool2 (CmdTool264) I'm getting the temperatures of my HDDs. For my Intel DC S3500 Series SSDs (SSDSC2BB240G401) I'm getting "N/A" instead. The spec sheet @ http://www.intel.com/content/dam/www/public/us/en/documents/product-specifications/ssd-dc-s3500-spec.pdf states: "The Intel® SSD DC S3500 Series has an internal temperature sensor with an accuracy of +/-2C over a range of -20C to +80C which can be monitored using two SMART attributes: [...] Device Internal Temperature (C2h)." I tried SmartmonTools and CrystalDiskInfo without success - they don't support my RAID controller with my OS: Windows 7 Ultimate SP1, 64 bit.
Will a future release of storcli or CmdTool2 return the SSD temperature instead of N/A?
Which command line tool or dll can I use to get the current SSD temperature behind my RS25DB080?
Hello everybody! I have a board s1200bts, when power on it makes 1 long and 3 short beeps, then OS proceed, but applications hangs or shut down. Can anyone help? Thanks
We have a MFSYS25V2 Chassi with firmware 11.5 and three compute modules. The servers running on the IMS Virtualization Manager.
It was configured a NTP time server.
The NTP time will not be accepted by each server. Not even for a boat. The times are on the servers always one hour behind than on the CMM.
Does anyone know the problem?
Thanks!