Hi
I installed on a S2600WTTR (Bios: SE5C610.86B.01.01.0027.071020182329 / CPU Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz)
ESXi 6.7. (6.7.0 (Build 10176752))
Now i see that some Sensors are unknown.
But on the VMWare Compatibility Guid the System shod be ESXi 6.7 compliant:
Intel S2600WTT Intel Xeon E5-2600-v4 Series ESXi 6.7,ESXi 6.5 U2,ESXi 6.5 U1,ESXi 6.5,ESXi 6.0 U3,ESXi 6.0 U2,ESXi 6.0 U1
https://www.vmware.com/resources/compatibility/pdf/vi_systems_guide.pdf
Have i missed something ?
We have custom build server with Intel Server Board S2600STB + two CPUs SILVER 4110 + 6 modules SERVER MEMORY 16GB PC19200/REG KVR24R17S4/16 KINGSTON.
The problem we have is very strange. Server booting to BIOS screen after F2 takes about 1 minute. Every BIOS menu open takes 5 seconds, load default settings and save settings takes 20 seconds. Also, we have a Adaptec RAID kontroller installed. Adaptec RAID configuration also runs very slow and freezing, you can see how every screen have been drawing Debian installation till progress 20% on SSD M.2 takes 2 hours, also Windows installation till 30% takes about 4 hours. So, all system is running extremely slow, you can see how every BIOS screen have been drawing on monitor, like you have 0.00005 CPU cores. Server is brand new with all new components.
BIOS are on latest 14 version.
Hi guys,
i need help. We have the intel mainboard S2600GZ and our supplier says to us, that we need the BIOS Version 01.01.1002 for the CPU Upgrade. On the Intel Download Site i can't find this Version of BIOS. By other Version the server show no screen and no BIOS. The server starts only with E5-2640 CPU by each BIOS Version of the Intel Site. Have anyone this special Version?
Thanks!
Bios does not see the system disk.I set the image through the clonezilla and the disk appears.After installing the system, the disk does not appear in the section BOOT. I try to start with Legacy and UEFI. Plz who can help in this matter? Sorry for my bad english.
Just got a S1200SPLR board to build a server for a client. CPU is a E3-1240V6. Chassis is an older P4304XXSFCN.
Board specs:
PC:DBS1200SPLR
Version#:H77895-272
MM#:951869
BATCH#:CNQS88B0C0
PBA#:H57532-271
PACK Date: 11 AUG 18
Server boots and I press F2 and get the Setup Page. On that page I see:
IFWI Version: S1200SP.86B.BR.64.2018.16.5.01.1114.SELFBOOT
BIOS Version: S1200SP.86B.03.01.4029.041320180314.FACTORY
If I go into the Main subsection I see for both Primary and Backup:
Version: S1200SP.86B.03.01.4029
Date: 04/13/2018
On the Intel Support web site for the Downloads and Drivers for the S1200SPLR board it lists the latest BIOS as 03.01.0038.
According to the Release Notes for version 03.01.0038 dated June 26, 2018, before you update to 03.01.0038 you have to install bridge BIOS 03.01.2032. Though no where in the release notes is there a mention of the BIOS version, 03.01.4029, that I have on this motherboard.
Since this board was packed in August, which is later that June, do I need to update the BIOS or do I have something new or what?
I need to do something as the fan runs at full speed right now so I figure something needs to be done.
We just purchased and installed an Intel RS3WC08 Raid controller. We are using 8tb SAS drives with Mini SAS HD to 29pin SFF-8482 with SAS 1pin Power Port 12gb/s fan out cable to attach the drives to the controller. When booting up and going into the RAID controllers bios we are unable to see the drives being detected. Also, when checking to see if the drives are even being powered we are unable to hear them spin up. We are attaching the power cable from the power supply to the back of the Mini SAS adapter cables as normal. We have tested a standard sata drive using the same power cable from the PSU and it spins up fine. Please help. Thank you so much. –Frank
Before I had the same problem with motherboard which reported Platform ID as S2600SDP
Intel has replaced motherboard to me by standard warranty as wrong motherboard
New board has correct identification. And Power Supply FAN was working quietly.
Support person recommended me to upgrade BIOS on new received board and the story has repeated.
Power Supply fan rotates at max speed.
It is not PS Fan fault. It is some other fault.
As I know already, the loud PS Fan is made for signalling of critical system faults.Customer support by phone replies too slow.
So I decided to ask here.
Please, help me identify the fault source. ( taking into account that fault raised right after BIOS UPGRADE )
I attach sysinfo logfiles here
Thank you.
I installed ASC on a new server and realized I had installed an old version. I installed the new version over the old one and opened up the webpage. Everything looks the same and when I go to help/about within the webapp I see the old version info. I tried completely uninstalling and reinstalling. I tried rebooting. Is there something getting stuck?
CPU E3-1270 V2Is the CPU E3-1270 V2 affected by the 'CVE-2018-3655' vulnerability?
Hello!
I've got Intel RSP3TD160F RAID Controller with AXXRMFBU7 MFBU. Raid Web Console 3 (and storcli) shows that auto learn is "transparent" with period = 1 DAY.
We have previous generation Intel RAID controller RS25AB080 with SuperCap2 module - it has auto learn period = 28 days which is on par with accumulator based BBUs.
Is 1-DAY auto learn period of AXXRMFBU7 normal? Is it so frequent by design or due to a firmware bug?
Is it possible to create a raid from two ssd disks in the following configuration:
- server board S2600STQ
- Intel Xeon 3106 Bronze
- RAID ASUS Hyper M.2 X16 Card
- 2 * Intel SSD M.2 256Gb P3100 серия SSDPEKKA256G701
- ACTIVATION KEY RAID SSD VROCISSDMOD 956822 INTEL
or it is necessary to connect ssd immediately via PCIe OCuLink connectors?
This server board is missing here Intel Tested Hardware and Operating System List
Hello all,
Just set up new system for R1208WFTYS and R2224WFTZS after upgrade BIOS version (S2600WF_EFI_BIOSR0014_ME04.00.04.340.0_BMC1.60.56383bef_FRUSDR1.60) and restart system, after that System fan runs too fast and very loud.
Both server system have same motherboard (S2600WFT).
Does any one get the same issue? Please help.
Sincerely,
Brian
Hello! I can not connect to the server console. How to fix it? Why is the certificate revoked?
Hello!
We have another server with this strange issue.
Server started to give RAID card overheating errors. But in reality it is not true.
We changed RAID card to a new one - still the same problem.
Motherboard is S2600CW2.
RAID controller logs attached. and RAID controller FW is the latest available.
How to fix it?
P.S::
We had familiar problem with S2600WT board and problem started in the same way but then another problem appeared with battery controller.
RS3DC040 RAID controller started to beep with battery module
Hi Support,
We are using intel server board S2600WT with the BMC configuration.
In the BMC setup we can see that there is possibility to send some SNMP traps to external server.
Can we install any SNMP manager and receive those traps properly ? Do you have any MIB database for the OID's that can be send from BMC ?
Br,
Hi
I installed on a S2600WTTR (Bios: SE5C610.86B.01.01.0027.071020182329 / CPU Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz)
ESXi 6.7. (6.7.0 (Build 10176752))
Now i see that some Sensors are unknown.
But on the VMWare Compatibility Guid the System shod be ESXi 6.7 compliant:
Intel S2600WTT Intel Xeon E5-2600-v4 Series ESXi 6.7,ESXi 6.5 U2,ESXi 6.5 U1,ESXi 6.5,ESXi 6.0 U3,ESXi 6.0 U2,ESXi 6.0 U1
https://www.vmware.com/resources/compatibility/pdf/vi_systems_guide.pdf
Have i missed something ?
Hi all,
I would like to know about the technical specifications about this product
https://en.wikichip.org/wiki/intel/xeon_gold/6138p
which is the Intel Xeon Scalable processor with integrated FPGA.
Thanks in advance!
Nivetha
We have custom build server with Intel Server Board S2600STB + two CPUs SILVER 4110 + 6 modules SERVER MEMORY 16GB PC19200/REG KVR24R17S4/16 KINGSTON.
The problem we have is very strange. Server booting to BIOS screen after F2 takes about 1 minute. Every BIOS menu open takes 5 seconds, load default settings and save settings takes 20 seconds. Also, we have a Adaptec RAID kontroller installed. Adaptec RAID configuration also runs very slow and freezing, you can see how every screen have been drawing Debian installation till progress 20% on SSD M.2 takes 2 hours, also Windows installation till 30% takes about 4 hours. So, all system is running extremely slow, you can see how every BIOS screen have been drawing on monitor, like you have 0.00005 CPU cores. Server is brand new with all new components.
BIOS are on latest 14 version.
Just got a S1200SPLR board to build a server for a client. CPU is a E3-1240V6. Chassis is an older P4304XXSFCN.
Board specs:
PC:DBS1200SPLR
Version#:H77895-272
MM#:951869
BATCH#:CNQS88B0C0
PBA#:H57532-271
PACK Date: 11 AUG 18
Server boots and I press F2 and get the Setup Page. On that page I see:
IFWI Version: S1200SP.86B.BR.64.2018.16.5.01.1114.SELFBOOT
BIOS Version: S1200SP.86B.03.01.4029.041320180314.FACTORY
If I go into the Main subsection I see for both Primary and Backup:
Version: S1200SP.86B.03.01.4029
Date: 04/13/2018
On the Intel Support web site for the Downloads and Drivers for the S1200SPLR board it lists the latest BIOS as 03.01.0038.
According to the Release Notes for version 03.01.0038 dated June 26, 2018, before you update to 03.01.0038 you have to install bridge BIOS 03.01.2032. Though no where in the release notes is there a mention of the BIOS version, 03.01.4029, that I have on this motherboard.
Since this board was packed in August, which is later that June, do I need to update the BIOS or do I have something new or what?
I need to do something as the fan runs at full speed right now so I figure something needs to be done.
Hi.
I have a new server with board S2600WT, I've upgraded it to latest version of BIOS, BMC, etc. There are two Xeon Gold 6138 CPU in the server and 768GB RAM. After each server reboot I see an error 0x19b
There are two screenshots with the same error in RMM and in BIOS:
The same rrror in the rmm email:
Event that generated this alert:
RID:0046 TS:10/19/2018 15:05:24 SN:POST Err Sensor ST:System Firmware Progress ED:System Firmware Error ET:Asserted EC:OK
RID:0046 RT:02 TS:5BC9F2B4 GID:0001 ER:04 ST:0F S#:06 ET:6F ED:A0 9B 01 EX:00 00 00 00 00 00 00 00
Can anyone tell me how can I resolve this issue? Thanks.