P4308XXMHDR, 8 posible disk, but cable for only 4
Hello all This is my first post. I'm stuck on this. We are building a server with a P4308XXMHDR chasis with a S2600CP2 motherboard.Chasis come with space and 8 hot-swap hard disk carriers. Motherboard...
View ArticleLAN port in Team and Switch
I've due lan port in team (Adaptive Load Balancing). My question is: the port on switch must have trunk enabled?
View ArticleClik here to view.
S5520SC Board will not accept over 8GB memory. What to do?
My S5520SC Intel Board will not accept over 8GB memory. What to do. Running XP 64 bit. Also forum does not apperar to have an English Language option. ThanksBob AZ
View Articlemodule does not start automatically
Hello.I have five MFS5520VI Compute Module (BMC Firmware ok 1.27.1, BMC Boot ok 0.28, BIOS ok S5500.86B.01.00.0060.092120111445)I set the value "Reset" in the "Resume on AC Power Loss" option.After...
View ArticleIntel S2600GZ Server SSD Issue
I have Intel S2600GZ server with 1 SSD (on which OS will be installed), 2 SAS hardisks & RS2WC040 RAID controller, I have to created RAID 1 on SAS. but it's not detecting SSD on which I have to...
View ArticleClik here to view.
S1200BTLRM: Status LED blinking amber
I just installed my second new S1200BTLRM motherboard. I am interested to find out what is the reason for blinking amber status led. No other led are on/off/blinking. I didn't have this kind of result...
View ArticleClik here to view.
CentOS 6.6 Intel SRCSAS18E
I have been running an intel mobo with hardware RAID and 6 x 1TB Drives for about four years. The server stopped booting a few weeks ago and I am trying to resurect it and if possible salvage the...
View ArticleClik here to view.
PCI\VEN_8086&dev1503 Windows Server 2012 r2 Ethernet Driver
good day. Is there any drivers for this device on Win Server 2012 r2 ?
View ArticleW2600CR Bios Issue (Fans runs @ Max)
We purchased 8 W2600CR servers around end of November 2014. We built and config'd 5 of them then updated bios to make fans runs quite all work well. Now over the last week we have completed the last...
View ArticleClik here to view.
S1200BTLRM: ipmitool unable to establish session
Hi, I have installed Ubuntu 14.04 and ipmitool. LAN1 is used as channel 1 and there is different IP address for OS than for BMC and default GW has been set also. Ipmitool is successful in executing...
View ArticleINTEL P4308RPLSHDR SERVER SYSTEM WITH RSBL080
I have 2 servers like this. Issue with both is that hotspares fail on patrol reads. I narrowed it down to the fact they go from power transition to unconfigured bad state when patrol read starts. I...
View ArticleClik here to view.
S2600CP P4308CMHEN Fan Noise
Halo to all, I have an Intel Server P4308CMHEN with the S2600CP.Board Information: Product Name : S2600CP | Serial Number: QSCP35000469 | Part/Model Number : E99552-510 | FRU File ID : FRU Ver 1.00 I...
View ArticleS2600GZ RAID upgrade
We are using S2600GZ as our main server platform with its onboard Intel RST RAID and WD 10krpm SATA drives (RAID10). All servers are running Hyper-V role and Win/Linux virtual machines. I'm trying to...
View ArticleS1200BTL startup error
Hey,I have an old server with S1200BTL with E3-1220 and 2x2 GB ram.The server worked fine for a while, after that was discontinued. Now i'm trying to use it again, but it doesn't boot.It powers on...
View Articleraw ipmi command to retrieve NIC 1 MAC address on S2600GZ
Hi there, what is the right approach to retrieve the NIC 1 MAC address (for OS usage) via IPMI? NOTE: I am assuming the system is powered off and that a DHCP server assigned an IP address to the BMC...
View ArticleClik here to view.
We have a set of drives in a RAID 1 and RAID 5 configuration via the Intel...
We have a set of drives in a RAID 1 and RAID 5 configuration via the Intel RS25D8080 RAID controller. We need run SMART tests on these drives from a remote workstation. How can SMART commands and info...
View Articleintel s1200btl - BB +3V Vbat warning.
I see this in vmware and in bmc web console, should i be worried? Error: BB +3V VbatUpper Non-CriticalWarning3.196 Volts
View ArticleMYSYS25 switch replacement
Hell, switch in our Intel modular server mysys25 started failing. All servers lost connectivity and we have to pull switch out and put it back in everytime. We ordered new switch, but when we put it in...
View ArticleRS3DC080 with RES3TV360 issues
Hi community, I bought an RS3DC080 and connected both ports to a RES3TV360 Expander with Windows Server 2012 R2 on a SuperMicro Board. Issue 1:In Intel RAID Web Console 2 it only shows that the disks...
View ArticleMFSYS35 with Intel® Modular Server Storage Management Pack questions.
Hi, I need to convert a couple of RAD5 LUNS to RAID 10. We have not got the Intel® Modular Server Storage Management Pack. However I believe that I can use this for 30 days in evaluation. Are there any...
View Article