Intel RMM3 problems&bugs (not response on http://)
Intel RMM3 on S1690wbr Servers sometime don't response on http://For normal and proper work servers must be reset.So how fix this problem? Servers and BMC has latest firmware and updates
View ArticleForeign configuration auto-import did not import any drives
Hi, I replaced my SRCSATAWB raid controller, with an configured raid 5 array of 4 disks, with a new RS2WC080 raid controller.Now I tried to import the old configuration in the raid web console 2 in Win...
View ArticleIntel Storage SS4200-E problem
Hi, I have a ss4200-e and it always worked fine, a few weeks back when I open the browser it shows only the Setup0.html page, all corrupted and even if I redo the setup steps, it goes back to the...
View ArticleS3420GP and RAM
Hello,I have a server mothebord S3420GP with 6 memory slots.Now, I have 2 slots filled with these: 2x KINGSTON 4GB 1333MHz DDR3 ECC CL9 DIMM with Thermal Sensor. Is possible to use another 4 these...
View ArticleStrange Behaviour of Suspend-to-Ram (ACPI S3) on S1200V3RPL Server Board
Hi there, I have a system with a S1200V3RPL Server Board in an Intel P4000S chassis, using the latest available FW version S1200RP.86B.02.01.0004. There are also two raid controllers...
View ArticleP4304XXSHCN with S1200V3RPL chassis fan speed
Does anyone have any information about thermal management of the following combination.New P4304XXSHCN chassis with S1200V3RPL board and E3-1241v3 cpu with stock cooler.Firmware updated to...
View ArticleS2600CP2 not posting
I have just put together a server Chassis: Intel 4U Pedistal.Motherboard: 2600CP2CPU: Single E5-2620 V2 All status lights green.No Beep codes.Initial text on screen display motherboard model. Then.......
View ArticleHow to update MFSYS25V2 to 10.18 firmware
Hello,I have an Intel Modular Server System MFSYS25V2 with fw Version 11.6.100.20120307.34736.I currently have two problems: 1) The CMM reboots about every 90-120 minutes. I see sequence of these...
View ArticleGPU cables
Hi, I am looking for GPU cable similar to G25087-001 but with two 8 pin connectors. P2 and P3 should be 8 pins.Some GPU boards required power from two 8 pin connectors. Total of 3 or 4 GPUs in the...
View ArticleIntel R1304BTL BMC access via portforwarding and NAT
Hello, I have a Intel R1304BTL server in my datacenter, and I need to access the BMC over internet, and I would like to do so by using port forwarding to the private ip number of the RMM module on the...
View ArticleWhat is the Default password for Diagnostic Logs of MFSYS25?
Can anybody Tell me the Default password of the zip file captured from Diagnostic Reports option from MFSYS25 Web console?
View Articles2400sc driver AHCI windows 2003
I need ti install windows server 2003 on S2400SC with two HD in raid mode, but during install I can't see the HD. I need driver AHCI for floppy (I think) where can i find it?
View ArticleIntel Active System Console on Ubuntu
How can I run Active System Console on Ubuntu 14.10 (x86-64)?
View ArticleIntel® Desktop Board DZ77SL-50K PCI & PCI E Use Same IRQ
Hi, I have purchased "Intel® Desktop Board DZ77SL-50K" on which i have connected One PCI Openvox 8 Port Analog Card and one PCI-E Openvox 8 Port Analog Card on my Asterisk Elastix Version # 1.8 Lunix...
View ArticleCATERR problem with S2600GZ
I'm having a problem booting up my S2600GZ machine. When I plug the power, it starts on its own, and keeps rebooting. Even the BMC console is not functioning. I tried upgrading the firmware, using the...
View ArticleOld server, 3 Tb drives.
Hello. I have an old Intel server system with FSR2520BPSAS 6-drive active SAS expander backplane. The server uses integrated motherboard SAS RAID controller which does not support >2Tb HDDs. I,...
View ArticleRAID0 with the Operating system W2012R2 on breaked apart.
My RAID0 with the Operating system W2012R2 on breaked apart. Intel Storage Utility shows status "Rebuild" and it will be rebuild whithin operating system, but I can't starst the operating system. Pls,...
View ArticleIntel S1200V3RPS ACPI Fail after Firmware Update
So, after firmware update, from 01.04.0002 to 02.01.0002, Windows 2003 doesn't boot with the stop 0x00000A5 Update is gone ok. Had i do something wrong with FRU/SDR? Many Thanks, Antonio D'Affuso
View ArticleCreate a TEAM for LAN adapter
I'm here again.My MB S2400SC has two LAN port (82574l) Is it possible to create a team between this adapter?
View ArticleRMS25CB080 performance
Hi ! We have server R2208ip4lhpc (fw 02.03.0003) with RMS25CB080 (fw 23.29.0-0016), AXXRMFBU2 (fw 0016).Drives 5x HGST HUC109060CSS600 (600gb Enterprise SAS 10k 6gbit/s) configured as two RAID1 sets...
View Article