Quantcast
Channel: Intel Communities : Discussion List - Servers
Viewing all 3923 articles
Browse latest View live

Windows 2008 Upgrade to Windows 2008 R2 and GPT

$
0
0

Hello we have a server running for a school but we have a big problem. We wanted to Upgrade from Windows 2008 64 bits enterprise to Windows Windows 2008 64 bits R2 following the next tutorial:

 

https://www.pluralsight.com/blog/tutorials/windows-server-2008-r2-install

 

And no problem at all to install very easy to do the upgrade following that tutorial. Now the Hard drive where the upgrade was made is 2.7 TB in GPT mode. Of course we were running the old Windows 2008 in the GPT mode hard drive since so long and of course booting in UEFI mode with our supermicro mainboard  X9DRH-7F.

 

Now all was fine until the update the update like I mentioned before finished perfectly but once finished never booted again we just see the EFI shell but we don´t know what to do there to make run again or boot again because we checked and the partitions are there let me explain how we know that.

 

This mainboard of supermicro is very good because allows you to create and select your own boot mode. For example you can create a boot mode and point to the BOOTX64.EFI in the hard drive and we were working like that but now after install the R2 and reboot the machine in the BIOS if we select or create a boot mode pointing again to the BOOTX64.EFI nothing happens and supermicro mainboard not detect and always boot in the EFI shell. That is we know all is there because bia the BIOS when we are creating a new boot option and point there the files of BOOTX64.EFI exist

 

How can we fix the boot again our server went out of production and we are in a big trouble with people trying to enter.

 

Thank you


S2600CP can't start after I installed another graphics card

$
0
0

I fitted a S2600CP with 2*E5-2670 and 128GB Reg ECC in a tower case. The system was running normally for a month. I was using a GT610 and tried to replace it by a GTS450. The system just won't start even if I switched back to GT610. As long as I plug in the power cord, the blue SYSTEM ID LED will blink for several seconds, then turn constantly for around 1 minute and go out finally. The other LEDs are in green like normal. If I push the power button all the fans will rotate for less than 1 second and stop. I didn't find any visible damage on the board so there must be something wrong with the software. Anyone encountered the same problem? How to solve that? Thanks.

Intel SR1400SYS cant see the HDD's

$
0
0

I cant see the Hard drives in PCI Config (bios) nor can it load windows7 or Ubantu  - I need this server going for kids to play games on   I tried to load all the drivers in the intel download page to no avail.   and I cant see a sata config page in bios to change modes. bios 2.53 American megatrends.

Сервер на основе SE7520BD2.

$
0
0

Здравствуйте. у меня тоже сервер на такой плате. перестал включаться. у одного блока питания желтая лампочка. у 2го- зеленая. при включении кнопки включения - происходит бип 1-5-4-4. даже если вынимаю "желтый" БП - все тоже самое происходит.

no VGA signal on boot from HNS2600WP

$
0
0

I have a new to me H2312XXKR chassis with four HNS2600WP blades.  I added RAM and CPU to one blade and tried to boot it but get no VGA signal.  The same RAM DDR3 1600 and CPUs E5-2650 V2 work in another 2600WP blade just fine.  This one seems to be new and never used.  Is there a trick to setting up these boards for the first time?

how can i find my original product key that came win windows because i lost it

$
0
0

how can i find my original product key that came win windows because i lost it

Save Configuration Failed

$
0
0

Recently I successfully created a level 5 RAID array running on my RS2BL040 controller.  From within the RAID web console 2 (RWB2), when I select the controller and click on "Save Configuration", I get an error message that says "Save Configuration Failed".  Why might that be?

s2600cw motherboard - Windows SRVR2012 R2 - Hyper-V - Full System freeze on ssd drivers only

$
0
0

Hello,

 

We installed a new server with motherboard s2600cw. The Server freezes completely and a force restart is required when virtual machines are running on SSD drivers. This doesn't happen on mechanical hard disks. We suspect some issue between the controller and the Gen2 SCSI virtual machines running on Hyper-V. Please assist.

 

Regards,

CompNet


R1304RPMSHOR (S1200V3RP) Platform Confidence Test (PCT) Utility for EFI 3060072f error

$
0
0

Hello,

I have a R1304RPMSHOR (S1200V3RP) server.

The chassis fan is running too fast or too loud

I have download the PCT for EFI, copy it to a USB and follow instructions.

But when I click on "quick test" or "comprehensive test" an error is shown and no test is done:

 

*** ERROR TX64.EFI 3.22.1.0001 ***

Missing or invalid software license.

Standard Error Code = 3060072F

(Error logged at 08-16-2016 16:18:04)

 

I have search but I have not found any reason.

Does some know the reason of the error? or a way to solve it? 

I will appreciate any help. Thanks a lot

S5000VSA SATA Port

$
0
0

Dear All,

 

I have S5000VSA Rev. G, im a little bit confuse about the 6 sata port on the board and in term of SAS or RAID, is it possible if i need to use all those 6 port for the 6 hard disk ? That mean i can have C, D, E, F, G and H Drives?

 

Please advice. TQ

compatible S2600WTTR and RS3WC080

$
0
0

Hi! If the motherboard S2600WTTR is compatible with the controller RS3WC080? The motherboard specifications S2600WTTR not indicated support RS3WC080 board. Why?

Support for IPMI Cipher suite IDs above 15

$
0
0

Which server support IPMI cipher suite IDs above 15 (with SHA2 -non MD5 auth/integrity algorithms)?

 

I have checked quite few common servers with BMC support and do not seem to find any which support these. Also, it seems difficult to find this even in the spec descriptions.

 

Thanks!

Intel server PCI-E risers compatibility

$
0
0

Will Intel SR2500 riser like the D25818-202 work in S5520UR motherboard?

 

Thanks in advance!

Intel® Server System R1304RPSSFBN noise fans

$
0
0

Hello every one,

 

I am configuring an Intel Server System R1304RPSSFBN, I have already update the Bios and the Firmware 4 time with the latest version 03.03.0003 and the fans still spinning on full speed, any ideas what is the problem and if I can change the speed of the fan somehow??? Also the front panel has the green standby power LED lit and in the back panel is a green flashing LED.

 

Many thanks

Unusable display on Ubuntu with S2600WTT

$
0
0

Hello Gents,

 

We're experiencing strange problems with various Ubuntu versions on a S2600WTT server (using a Xeon E5-2660 v4):

Using the onboard graphics, the display is excessively slow, at a point it is barely usable.

 

Additionally, we're experiencing a slow memory throughput. Both problems might be linked. Updating the BIOS and playing with almost all settings there didn't change the problem.

 

Any clues on what might cause that?

Thanks for your input.


Проблема с Intel Gigabit CT Desktop Adapter, error 10317

$
0
0

Добрый день.

Что имеем:

Два Сервера fujitsu, конфигурация серверов абсолютно одинаковая, на обоих установлено по две сетевые карты:

Intel Gigabit CT Desktop Adapter (EXPI9301CTBLK) - локальная сеть

Intel Ethernet Connection I219-LM - интернет

 

На серверах установлен Window HyperV 2012R2.

На одном HyperV01 установлена виртуальная машина - сервер теминалов, на втором Hyperv02 установлена виртуальная машина - сервер БД. Пользователи работают с сервером БД через терминальный сервер, через сетевой адаптер Intel Gigabit CT Desktop Adapter (EXPI9301CTBLK).

 

ПРОБЛЕМА: периодически отваливается сетевой адаптер, виртуальные машины становятся недоступны, помогает только перезагрузка сервера Fujitsu.

 

Error 10317 и сетевая карта становиться недоступна:

 

Имя журнала:   System

Источник:      Microsoft-Windows-NDIS

Дата:          28.07.2016 18:55:51

Код события:   10317

Категория задачи:PnP

Уровень:       Error

Ключевые слова:(16384),(16),(4),(2)

Пользователь:  система

Компьютер:     hyperv01

Описание:

Miniport Intel(R) Gigabit CT Desktop Adapter, {436ba2fa-ae4a-4be5-af73-fc6d63f3a688}, had event Fatal error: The miniport has detected an internal error

Xml события:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

   <System>

     <Provider Name="Microsoft-Windows-NDIS" Guid="{CDEAD503-17F5-4A3E-B7AE-DF8CC2902EB9}" />

     <EventID>10317</EventID>

     <Version>0</Version>

     <Level>2</Level>

     <Task>2</Task>

     <Opcode>0</Opcode>

     <Keywords>0x2000000000004016</Keywords>

     <TimeCreated SystemTime="2016-07-28T15:55:51.316867800Z" />

     <EventRecordID>2478</EventRecordID>

     <Correlation ActivityID="{436BA2FA-AE4A-4BE5-AF73-FC6D63F3A688}" />

     <Execution ProcessID="4" ThreadID="3128" />

     <Channel>System</Channel>

     <Computer>hyperv01</Computer>

     <Security UserID="S-1-5-18" />

   </System>

   <EventData>

     <Data Name="IfGuid">{436BA2FA-AE4A-4BE5-AF73-FC6D63F3A688}</Data>

     <Data Name="IfIndex">13</Data>

     <Data Name="IfLuid">1688850044813312</Data>

     <Data Name="AdapterName">Intel(R) Gigabit CT Desktop Adapter</Data>

     <Data Name="MiniportEventEnum">71</Data>

   </EventData>

</Event>

 

Потом событие 56:

 

 

Имя журнала:   System

Источник:      e1iexpress

Дата:          28.07.2016 18:55:51

Код события:   56

Категория задачи:Отсутствует

Уровень:       Information

Ключевые слова:Classic

Пользователь:  Н/Д

Компьютер:     hyperv01

Описание:

Не удается найти описание для идентификатора события 56 из источника e1iexpress. Вызывающий данное событие компонент не установлен на этом локальном компьютере или поврежден. Установите или восстановите компонент на локальном компьютере.

 

Если событие возникло на другом компьютере, возможно, потребуется сохранить отображаемые сведения вместе с событием.

 

К событию были добавлены следующие сведения:

 

Intel(R) Gigabit CT Desktop Adapter

 

ресурс сообщения существует, но сообщение не найдено в таблице строк и таблице сообщений

 

Xml события:

<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">

   <System>

     <Provider Name="e1iexpress" />

     <EventID Qualifiers="24580">56</EventID>

     <Level>4</Level>

     <Task>0</Task>

     <Keywords>0x80000000000000</Keywords>

     <TimeCreated SystemTime="2016-07-28T15:55:51.316867800Z" />

     <EventRecordID>2479</EventRecordID>

     <Channel>System</Channel>

     <Computer>hyperv01</Computer>

     <Security />

   </System>

   <EventData>

     <Data>

     </Data>

     <Data>Intel(R) Gigabit CT Desktop Adapter</Data>

     <Binary>0000040002003000000000003800046000000000000000000000000000000000000000000000000038000460</Binary>

   </EventData>

</Event>

 

Помогает только ребут сервера.

 

Драйвера обновляли - не помогает.

 

Вопрос: Что делать? Куда двигаться дальше?

sr2500 with lsi-9211-8i no disk found

$
0
0

We have 2 SR2500ALLRX servers, en added 2 lsi9211-8i sata controllers in pci-e slot.

We then connected 2 SFF-8087 cables (4x Sata each) to the mid-plane (passive pass throught non raid) but we dont see any disks in 9211-8i bios.

The hdd light in the front panel is staying green, and there is there are no hdd lights lighning/blinking.

 

Any suggestions?

Intel VCA setup issue

$
0
0

Hi,

 

Unfortunately, I could not find the appropriate section for VCA on these forums, and since the main aspect of VCA is Intel graphics, I am posting my question here.

 

I am trying to explore Intel VCA capabilities and set up it according to QuickStart guide http://www.intel.com/content/dam/support/us/en/documents/server-products/server-accessories/Visual_Compute_QSG.pdf . For this purpose I set up a Supermicro SM 2028GR-TR server with 64GB RAM and dual Xeon E5 v3, made sure BIOS memory settings are good to go, downloaded the latest (and the only available) version of QuickStart package (IntelVisualComputeAccelerator_QuickStart_1.2.81.zip) and installed CentOS 7.2.1511.

 

After the SW setup according to the guide, I got stuck at "vcactl boot" and "vcactl status" commands - both throw

"ERROR: Command vcactl boot FAILED due to modprobe timeout for some of nodes!"

exception after several seconds of waiting.

 

Try as I might, I could not bring the VCA board online, although its hosts are visible via lspci. Would you help me to debug this issue?

 

Thanks,

Mikhail.

s2600cw server board unable to detect the Add-in Video Card.

$
0
0

We owned 2 brand new identical servers with Intel Server Motherboard S2600CW.  One of which installed with the graphic card Asus GeForce GTX 960, and the other using the on-board vga. Both has been working well. Recently, we have some adjustments  to the servers. We took out the graphic card and installed into the other server. The problem is that the graphic card could not be detected in the other motherboard.

 

We have tried to slot in into all the available slots but no prevailed. When we slotted back in to the original server, the motherboard detected it, which means the graphic card is not faulty at all.

 

We are unable to figure out the Bios setting. We cannot change the Add-in video adapter to enable. It is always grey out. We suspect the Bios setting, but we are unsure what to do. Please help.

intel RMM2 -KVM Java issue

$
0
0

Hi,

I have a SR1500PAL server with a intel RMM2

When i access the webpage and try to run the console ,

java opens and i can see the hosts screen, however its not not working with keyboard and mouse during a KVM

I have a window 7 home, java 5, when i choose other O/S on kvm settings mouse sync dosnt work(says unable to sync) on the left corner, or the keyboard and with windows/mac setting on.

the Host OS is running 2008 R2

any idea why it dosnt work?

Viewing all 3923 articles
Browse latest View live


<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>