Quantcast
Channel: Intel Communities : Discussion List - Servers
Viewing all 3923 articles
Browse latest View live
↧

H2224XXLR2 missing PSU FRU's

November 7, 2018, 8:24 am
$
0
0

Hi,

 

I've got a few h2224xxlr2 chassis, but am missing the FRU's for the PSU's on 2 of them.

 

Upgraded several times, but on all nodes in the chassis the same behaviour is visible :

from the bmc->configuration->sdr configuration :

 

Processed Tags
FRU & SDR Update Package for Intel(R) Server Board S2600TPx (S
2600TP_117)
Copyright (c) 2017 Intel Corporation
 
  
Intel(R) Server Board S2600TPR detected
  
 
Auto-detecting chassis model and attached hardware.
This may take up to 1 minute to complete.
NODE Presence is present
  
Power supply 1 detected but unable to identify model.
Sensors for power supply 1 will not be installed.
  
Power supply 2 detected but its FRU data is invalid.
Sensors for power supply 2 will not be installed.
  
  Detected Hardware

 

Any hints ?

 

- Jan

↧
Search

Intel RAID (RMS3CC080), how to "Online RAID Expansion", cant find it in BIOS or RWC3

March 14, 2018, 1:17 am
$
0
0

Hi

 

We have a S1200SPOR with RMS3CC080, the below document on page 6 (real PDF page 16) says this controller (and all others that are 12Gb) will:

 

"Online capacity expansion to add space to an existing drive or a new drive"

"Online RAID level migration"

https://www.intel.com/content/dam/support/us/en/documents/server-products/raid-products/12G_RAID_Controllers_UG.pdf

 

Ive completed both of the above before with PROMISE controllers and LSI / AVAGO, however i can find anyway in the BIOS or with RWC3 (RAID Web Console 3) to do this, when i select the Virtual Drive there are no options to expand or change the RAID level.

 

So how is this done?

↧
↧

S2600GL CATERR Debugging

October 11, 2018, 12:58 am
$
0
0

An S2600GL motherboard  in my possession died. I'm at a loss as to what went wrong. I understand that the support period is probably expired, not sure about my support options but i figured i'd reach out.

 

It appears none of the major rails have any issues, but I just get no CPU vcore (it's not shorted, i checked  =P), rest of the rails come up for about 0.6-0.9 seconds, it blips the CATERR LED twice, power cycles, then does it again.

 

Not sure how to continue without reversing the board and reading the C602 and relevant CPU datasheet. I thought it might be fun trying to go further, I figured it might be worthwhile gaining familiarity on a hardware/electrical level with intel server boards.

 

I enjoyed the level of documentation in the technical product specification, not sure whether there's any further board level information available. I'm curious as to why J4E2 is populated on both boards i have but does not appear to be mentioned anywhere?

 

I've used another board and verified the RAM, CPU's and PSU's are fine. BMC boots on the faulty board if that helps.

 

At a glance it appears the S2600WFQ, S2600WFT, S2600WF0 and S2600WT have the same/similar mechanical specifications? I'd like to confirm that's an upgrade path if boards keep dying?

 

Cheers.

 

Ed: grammar.

↧

S2600WT - No Usable Memory Error (0xE8) - BIOS ROM Flash

November 2, 2018, 10:23 am
$
0
0

Hello,

 

I have an Intel server assembled by EMC using Intel S2600WT Server Board that doesn't detect memory modules, exactly just tested with 2 different Kingston modules.

 

MB: S2600WT

CPU1: Xeon E5-2620v4

Memory tested:

- Kingston 16GB PC4-2400 CL17 RDIMM (KSM24RD8/16HAI)

- Kingston 16GB PC4-2133 CL15 RDIMM (KVR21R15D4/16)

 

The memories should work as they match the requirements... but...

 

The system doesn't boot: does 3 beeps and the LED's shows error code E8 (No Usable Memory Error)

 

What could be the problem? I know this RAM modules are fine.

 

Since the system does not boot I can't update the BIOS using EFI shell as it could be a BIOS problem, i located the BIOS flash chip and was wondering where i can find the actual BIOS binary, the releases only contains a cap file (Size: 8 781 904) perhaps the 16MB is for BIOS + Recovery?

 

The Winbond chip had an sticker with: 0014 (Perhaps it meant that BIOS version is 1.01.0014)

 

The release notes (Download Intel® Server Board S2600WT BIOS and Firmware Update for EFI) reads:

"B. Use flash programmer to burn the new BIOS ROM image (16MB) into the flash chip." but no more information about the procedure.

 

Thanks in advance!

↧

Raid SRCSASRB died!

November 3, 2018, 10:18 am
$
0
0

Hello!

 

My Raidcontroller SRCSASRB died! It is the second controller in this server which says Memory Error!

I'm unable to source this controller so i would like to know if the array could be read/mounted with a SRCSATAWB!?

 

I hope someone can help me out!

Last time the controller died john_s@intel was very helpfull - but i dont know if he's still in the forum!?

 

Best regrads,

Florian

↧
↧

Intel server s5500bc Video

November 7, 2018, 3:44 am
$
0
0

Hello,

 

I need an info about the graphic card on Intel server s5500bc. Currently is as Standard vga adapter with a 1024x768 resolution and the driver is from year 2006. I can't find the model of the card which is integrated, so I can find newer driver if any. I'll appreciate any info about it, also I'm running Windows 7 64bit.

 

Thanks

↧

S2600WTTR has Amber flashing warning light, but nothing listed in Event Logs - How can i diagnose?

October 24, 2018, 6:35 pm
$
0
0

Hi

 

We have a few S2600WTTR servers, and the Amber light is flashing once every second on one of them.

Nothing of consequence in the event log, and server seems happy.

 

How's the best way to diagnose this?

 

I'll attach a debug log to this post.

 

Thanks.

↧

CPU E3-1270 V2Is the CPU E3-1270 V2 affected by the 'CVE-2018-3655' vulnerability?

October 16, 2018, 11:17 pm
$
0
0

CPU E3-1270 V2Is the CPU E3-1270 V2 affected by the 'CVE-2018-3655' vulnerability?

↧
Search

RMS3AC160 ESXi 6.7 CIM/SMI-S Provider

October 15, 2018, 2:05 am
$
0
0

Hi

 

Is there a CIM/SMI-S Provider for RMS3AC160 under ESXi 6.7 ?

I cant get any also on the LSI/Broadcom website.

 

Thanks in advance

↧
↧

S2600WT - No Usable Memory Error (0xE8) - BIOS ROM Flash

November 2, 2018, 10:23 am
$
0
0

Hello,

 

I have an Intel server assembled by EMC using Intel S2600WT Server Board that doesn't detect memory modules, exactly just tested with 2 different Kingston modules.

 

MB: S2600WT

CPU1: Xeon E5-2620v4

Memory tested:

- Kingston 16GB PC4-2400 CL17 RDIMM (KSM24RD8/16HAI)

- Kingston 16GB PC4-2133 CL15 RDIMM (KVR21R15D4/16)

 

The memories should work as they match the requirements... but...

 

The system doesn't boot: does 3 beeps and the LED's shows error code E8 (No Usable Memory Error)

 

What could be the problem? I know this RAM modules are fine.

 

Since the system does not boot I can't update the BIOS using EFI shell as it could be a BIOS problem, i located the BIOS flash chip and was wondering where i can find the actual BIOS binary, the releases only contains a cap file (Size: 8 781 904) perhaps the 16MB is for BIOS + Recovery?

 

The Winbond chip had an sticker with: 0014 (Perhaps it meant that BIOS version is 1.01.0014)

 

The release notes (Download Intel® Server Board S2600WT BIOS and Firmware Update for EFI) reads:

"B. Use flash programmer to burn the new BIOS ROM image (16MB) into the flash chip." but no more information about the procedure.

 

Thanks in advance!

↧

KVM viewer for RMM on Intel S2600CW

November 11, 2018, 6:47 am
$
0
0

Hi Intel community, Can you sogest any idea how can I connect (KVM/VNC) to RMM on my server from mac os operating system.

I used to use Java Web start application, but not I can't use it now:

1) Java 8 is deprecated

2) Oracle removed web start feature from Java 11 (current).

 

Unfortunately MeshCommander is not working (timeout error).

↧

BMC Console not sending Traps

November 12, 2018, 12:05 am
$
0
0

Hello there.

 

We have a few servers with S2600GZ and we are trying to get traps for the baseboard alarms, the trap receivers have been configured successfully and we see a trap arrives when we use the test alarms option (trap is not aligned with eh basebrdv5 MIBs, we find out it is in PET format and managed to work around it), however, during testing it has been observed that no traps are been received for the tested scenarios: removing power supply and rebooting the server, in both cases only one trap is received "OEM System Boot" while under the event log it is observed multiple events about the tested scenarios, will appreciate your help with the following questions:

 

- Apart from the below configuration, is anything else required to make sure alarm traps are sent to the SNMP destinations?

- From the "events that will trigger alerts", can you please confirm if the tests performed (power supply disconnection and server reboot) will generate alarms?

 

Thanks.

↧

Manage and Monitor multiple Intel Servers in a Console

October 29, 2018, 9:11 am
$
0
0

Hi

Is there a Management Console for multilple intel servers. (Like HP SIM)

 

Thanks in advance

↧
↧

H2224XXLR2 missing PSU FRU's

November 7, 2018, 8:24 am
$
0
0

Hi,

 

I've got a few h2224xxlr2 chassis, but am missing the FRU's for the PSU's on 2 of them.

 

Upgraded several times, but on all nodes in the chassis the same behaviour is visible :

from the bmc->configuration->sdr configuration :

 

Processed Tags
FRU & SDR Update Package for Intel(R) Server Board S2600TPx (S
2600TP_117)
Copyright (c) 2017 Intel Corporation
 
  
Intel(R) Server Board S2600TPR detected
  
 
Auto-detecting chassis model and attached hardware.
This may take up to 1 minute to complete.
NODE Presence is present
  
Power supply 1 detected but unable to identify model.
Sensors for power supply 1 will not be installed.
  
Power supply 2 detected but its FRU data is invalid.
Sensors for power supply 2 will not be installed.
  
  Detected Hardware

 

Any hints ?

 

- Jan

↧

主板s2600 cp4装linux7.3的时候无法识别硬盘

November 7, 2018, 1:53 am
$
0
0

主板s2600 cp4 ，3个sas盘做raid5，装centos 7.3的时候无法识别到硬盘，谁能提供一下基于linux 7.3的raid驱动

↧
Search

How to set up new RPM range for CPU FANs?

October 23, 2018, 5:48 am
$
0
0

Recently, I replaced CPU fans on my server machine

The system  became much more silent.

However under load system do not increase RPM and do not reduce when system is idle.

 

 

I benchmark my system with CPU-Z

When CPU reached the temperature 77C the CPU load drops instead of increasaing RPM

Meanwhile, at CPU temperature 35C and below the FAN RPMs still remains the same

 

I tried to change FAN profile in BIOS - it didn't help. RPM remains the same.

 

The question is how to regulate RPM efficiently?

Is there some tool or setting to change RPM range and CPU-FAN-RPM(from-CPU-temperature) dependency

 

I have P4308CP4MHGC chassis with S2600CP2 Distil 5 motherboard

↧

Which of SDRs are installed by default?

November 8, 2018, 12:40 am
$
0
0

Latest BIOS update on my S2600CP2 board made PSU FAN run at max speed.
As I already know it is the signal of some hardware fault.

 

Further investigation gave me the result, that HW failure happened at SDR update. However I don't know which records exactly are faulty.

 

I know, that there are 2 options of SDR saving to the board from EFI shell.

 

1. frusdr /sdr s2600cp.sdr (With this option only 60 records are saved to the board) -  PSU FAN is quiet

2. frusdr /cfg master.cfg (With this option 217 records are saved) - PSU FAN is loud

 

Looking at the  master.cfg file I found, that frusdr utility in both cases read s2600cp file and saves not all records to the board

Only the records which have corresponding tags (_SDR_TAG "NAME" ) in .sdr file

Selected tag names list is defined (or built) by master.cfg file.

 

SDR tags set is set according to master.cfg script with SET and CLEAR instructions.

By the menus and autodetection comands tags set is constructed before SDR records saved to the board.

 

If I save SDR with frusdr /sdr s2600cp command the 60 saved records correspond to come predefined tag list.

Which is this tag list ?

↧
↧

2 GPU 1080Ti does not work on mainboard intel S2600CW2R

October 27, 2018, 5:03 am
$
0
0

Dear,

I have a CPU Intel Xeon E5 2620 v4 and 2 GPUs 1080Ti on a mainboard intel S2600CW2R.

1. I have only one CPU on 1st slot

2. Power for 2 CPUs are plggued in.

3. 1 VGA connect by riser cable on PCIe slot 6, 1 VGA connect directly on PCIe slot 5

4. Only vga on slot 6 can be display, and nothing whit vga on slot 5.

I used Ubuntu 18.02 and the system only see 1 VGA on slot 6.

How to display with both VGAs?

Please help me soon. It's very neccesery

↧

server board networking

November 13, 2018, 9:51 am
$
0
0

I have a S2600STB server board, but i have no activity on the network ports.  its a new install

↧

System Model S4600LH

November 12, 2018, 4:27 am
$
0
0

Энергосбережение на серверное платформа как можно отключить?

Установлено 4x E5-4620 v2 @ 2.60GHz Max Turbo Frequency3.00 GHz

Процессор работает на пониженных частотах постоянно 1,2 до 2,2 Ггц. Не можем заставить работать хотя бы на номинальность частоте в постоянном режиме.

Intel® Turbo Boost Technology нельзя включить, пока не включишь  по инструкции SpeedStep

 

Intel Turbo Boost Technology

 

Option Values:

Enabled

Disabled

 

Help Text:

Intel Turbo Boost Technology allows the processor to automatically increase its frequency if it is running below power, temperature, and current specifications.

 

Comments:

This option is only visible if all processors installed in the system support Intel

Turbo Boost Technology. In order for this option to be available, Enhanced IntelSpeedStep Technology must be Enabled

 

Кто знает, как решить эту проблему?

 

English---------------------------------------------

Energy saving on server platform how can I turn off?

4x E5-4620 v2 @ 2.60GHz installed Max Turbo Frequency3.00 GHz

The processor operates at low frequencies constantly 1.2 to 2.2 GHz. We can not make work at least on the rated frequency in constant mode.

Intel® Turbo Boost Technology cannot be enabled until you turn on the SpeedStep manual

Who knows how to solve this problem?

-----------------------------------------------------

↧
Viewing all 3923 articles
Browse latest View live
Search
<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>