I have an Intel 1200BTL motherboard with Xeon E3-1200v2 processor which sadly started beeping a few hours ago during boot. It beeps shortly six times and then remains silent. I'm not sure though if the beeps come from the BIOS or BMC. I guess it should be the BMC since in this case the beep sequence is supposed to happen only one time whereas the BIOS beep sequence should repeat itself. Also iirc from some earlier failures the BIOS sequence has a higher pitched noise compared to the current sequence.

The manual was not really helpful and I also could not find much for six beep tones on the web. For the AMI BIOS it would mean some A20 gate failure which is not really helpful.https://www.intel.com/content/dam/support/us/en/documents/motherboards/server/sb/g13326007_s1200bt_tps_r2_4.pdfBut as said, I don't even know if it is the BIOS. I also don't know if the error is related to the mainboard or maybe to the processor. I already changed the RAM so I guess I can exclude that. Any help appreciated.

Issue: Starting from production BIOS SE5C620.86B.00.01.0014.070920180847, when VROC Wolfpass x16 4-port retimer is connected to Riser 1, PCIe slot 1 (CPU0), the NVMe drives don’t show up in BIOS (UEFI Option ROM Control), Windows or Linux OS.

Reproducibility:  100%

Board:  Silver WolfPass system S2600WFT

BIOS settings: Default settings

Processors: verified on both Xeon Gold and Xeon Platinum Purley Skylake processors

Steps to reproduce: 

1. Connect VROC Wolfpass x16 4-port retimer to Riser 1, PCIe slot 1 (CPU0).

2. Connect Oculink to Oculink cables from retimer to Oculink connections on backplane.

3. Insert any Intel NVMe SSDs with U.2 form factor to drive slots where Oculink cables are connected to.

4. Notice with BIOS SE5C620.86B.00.01.0013.030920180427, the drives show up in UEFI Option ROM Control in BIOS.

5. Download production BIOS SE5C620.86B.00.01.0014.070920180847 from https://downloadcenter.intel.com/download/28001/?product=89015

6. Insert USB that contains above BMC/BIOS/ME/FD/FRU/SDR

7. Boot to BIOS and press F9 to load the defaults, then save and reboot

8. Boot to EFI Shell

9. Update BMC

10. Reboot and boot back into BIOS and notice NVMe drives still show up in UEFI Option ROM Control in BIOS.

11. Boot to EFI Shell

12. Update BIOS

13. Reboot and boot back into BIOS and notice NVMe drives no longer show up in UEFI Option ROM Control in BIOS.

Workarounds:

1. Downgrade to BIOS SE5C620.86B.00.01.0013.030920180427 and keep retimer connected to Riser 1, PCIe slot 1

or

2. Keep BIOS SE5C620.86B.00.01.0014.070920180847, but move retimer from Riser 1, PCIe slot 1 to Riser 2, PCIe slot 1 (CPU1)

Dear support,

We have one server S2600WT and this RS3DC040 RAID controller with battery.

All worked fine over a year, but at some day it started to give an overheating error.

But temperatures are Ok and it is 16C degrees in server room.

We upgraded all firmwares, that were possible to upgrade - that helped for few days.

Then we changed a RAID controller to a brand new one - didn't help.

When we unplugged battery - didn't help

We unplugged battery controller from RAID card - that helped and server stopped beepeing.

We changed this battery module to a new one - didn't help.

There is no errors in RAID console, but just beeping.

How can we solve this issue?

regards,

Sergei.

Continuing from my earlier post at Random fan spin-up on R1304SPOSHBNR

It has been a while, but I now have an additional unit, this time with Intel certified memory, that is experiencing the same symptoms. Namely, at random intervals, ranging from 15 minutes to a few hours, the fans will spin up to full speed for a few seconds before returning to normal speed. I narrowed the cause down to the P1 Therm Margin sensor, which will occasionally be unreadable for a moment. See the attached video file to see this in action.

These servers are all running CentOS Linux.

# dmidecode 3.0

Getting SMBIOS data from sysfs.

SMBIOS 2.7 present.

64 structures occupying 3771 bytes.

Table at 0x80630000.

Handle 0x0001, DMI type 221, 12 bytes

OEM-specific Type

        Header and Data:

                DD 0C 01 00 01 01 00 04 01 00 08 00

        Strings:

                Reference Code - ACPI

Handle 0x0002, DMI type 133, 12 bytes

OEM-specific Type

        Header and Data:

                85 0C 02 00 00 50 F9 81 00 40 00 00

Handle 0x0006, DMI type 0, 24 bytes

BIOS Information

        Vendor: Intel Corporation

        Version: S1200SP.86B.03.01.0026.092720170729

        Release Date: 09/27/2017

        Address: 0xF0000

        Runtime Size: 64 kB

        ROM Size: 16384 kB

        Characteristics:

                PCI is supported

                PNP is supported

                BIOS is upgradeable

                BIOS shadowing is allowed

                Boot from CD is supported

                Selectable boot is supported

                EDD is supported

                5.25"/1.2 MB floppy services are supported (int 13h)

                3.5"/720 kB floppy services are supported (int 13h)

                3.5"/2.88 MB floppy services are supported (int 13h)

                Print screen service is supported (int 5h)

                8042 keyboard services are supported (int 9h)

                Serial services are supported (int 14h)

                Printer services are supported (int 17h)

                CGA/mono video services are supported (int 10h)

                ACPI is supported

                USB legacy is supported

                LS-120 boot is supported

                ATAPI Zip drive boot is supported

                BIOS boot specification is supported

                Function key-initiated network boot is supported

                Targeted content distribution is supported

                UEFI is supported

        BIOS Revision: 0.0

        Firmware Revision: 0.0

Handle 0x0007, DMI type 1, 27 bytes

System Information

        Manufacturer: Intel Corporation

        Product Name: S1200SP

        Version: R1304SPOSHBNR

        Serial Number: QSCD80400069

        UUID: C81BB18B-33EF-E711-AB21-A4BF012C036E

        Wake-up Type: Power Switch

        SKU Number: SKU Number

        Family: Family

Handle 0x0008, DMI type 2, 17 bytes

Base Board Information

        Manufacturer: Intel Corporation

        Product Name: S1200SP

        Version: H57534-270

        Serial Number: QSSA80100236

        Asset Tag: Base Board Asset Tag

        Features:

                Board is a hosting board

                Board is replaceable

        Location In Chassis: Part Component

        Chassis Handle: 0x0000

        Type: Motherboard

        Contained Object Handles: 0

Handle 0x0009, DMI type 3, 24 bytes

Chassis Information

        Manufacturer: ...............................

        Type: Rack Mount Chassis

        Lock: Not Present

        Version: ..................

        Serial Number: ..................

        Asset Tag: ....................

        Boot-up State: Safe

        Power Supply State: Safe

        Thermal State: Safe

        Security Status: None

        OEM Information: 0x00000000

        Height: Unspecified

        Number Of Power Cords: Unspecified

        Contained Elements: 0

        SKU Number: Not Specified

Handle 0x000F, DMI type 11, 5 bytes

OEM Strings

        String 1: To Be Filled By O.E.M.

Handle 0x0011, DMI type 13, 22 bytes

BIOS Language Information

        Language Description Format: Long

        Installable Languages: 1

                en|US|iso8859-1

        Currently Installed Language: en|US|iso8859-1

Handle 0x0012, DMI type 27, 15 bytes

Cooling Device

        Temperature Probe Handle: 0x000B

        Type: Fan

        Status: OK

        Cooling Unit Group: 1

        OEM-specific Information: 0x00000000

        Nominal Speed: Unknown Or Non-rotating

        Description: Not Specified

Handle 0x0013, DMI type 28, 22 bytes

Temperature Probe

        Description: LM78A

        Location: System Management Module

        Status: <OUT OF SPEC>

        Maximum Value: Unknown

        Minimum Value: Unknown

        Resolution: Unknown

        Tolerance: Unknown

        Accuracy: Unknown

        OEM-specific Information: 0x00000000

        Nominal Value: Unknown

Handle 0x0014, DMI type 32, 11 bytes

System Boot Information

        Status: No errors detected

Handle 0x0015, DMI type 34, 11 bytes

Management Device

        Description: UNKNOWN

        Type: Unknown

        Address: 0x00000000

        Address Type: Unknown

Handle 0x0016, DMI type 35, 11 bytes

Management Device Component

        Description: To Be Filled By O.E.M.

        Management Device Handle: 0x000D

        Component Handle: 0x000A

        Threshold Handle: 0x000F

Handle 0x0017, DMI type 36, 16 bytes

Management Device Threshold Data

Handle 0x0018, DMI type 39, 22 bytes

System Power Supply

        Power Unit Group: 1

        Location: To Be Filled By O.E.M.

        Name: To Be Filled By O.E.M.

        Manufacturer: To Be Filled By O.E.M.

        Serial Number: To Be Filled By O.E.M.

        Asset Tag: To Be Filled By O.E.M.

        Model Part Number: To Be Filled By O.E.M.

        Revision: To Be Filled By O.E.M.

        Max Power Capacity: Unknown

        Status: Present, Unknown

        Type: Unknown

        Input Voltage Range Switching: Unknown

        Plugged: Yes

        Hot Replaceable: No

        Input Voltage Probe Handle: 0x0000

        Cooling Device Handle: 0x000A

        Input Current Probe Handle: 0x0000

Handle 0x0023, DMI type 19, 31 bytes

Memory Array Mapped Address

        Starting Address: 0x00000000000

        Ending Address: 0x001FFFFFFFF

        Range Size: 8 GB

        Physical Array Handle: 0x001E

        Partition Width: 1

Handle 0x0024, DMI type 24, 5 bytes

Hardware Security

        Power-On Password Status: Not Implemented

        Keyboard Password Status: Not Implemented

        Administrator Password Status: Disabled

        Front Panel Reset Status: Disabled

Handle 0x0000, DMI type 38, 18 bytes

IPMI Device Information

        Interface Type: KCS (Keyboard Control Style)

        Specification Version: 2.0

        I2C Slave Address: 0x10

        NV Storage Device: Not Present

        Base Address: 0x0000000000000CA2 (I/O)

        Register Spacing: Successive Byte Boundaries

Handle 0x0025, DMI type 221, 26 bytes

OEM-specific Type

        Header and Data:

                DD 1A 25 00 03 01 00 04 01 00 08 00 02 00 00 00

                00 5E 00 03 00 00 05 00 00 00

        Strings:

                Reference Code - CPU

                uCode Version

                TXT ACM version

Handle 0x0026, DMI type 221, 68 bytes

OEM-specific Type

        Header and Data:

                DD 44 26 00 09 01 00 04 01 00 08 00 02 03 FF FF

                FF FF FF 04 00 FF FF FF 31 00 05 00 FF FF FF 31

                00 06 00 FF FF FF FF FF 07 00 3E 00 00 00 00 08

                00 34 00 00 00 00 09 00 3E 00 00 00 00 0A 00 34

                00 00 00 00

        Strings:

                Reference Code - SKL PCH

                PCH-CRID Status

                Disabled

                PCH-CRID Original Value

                PCH-CRID New Value

                OPROM - RST - RAID

                SKL PCH H Bx Hsio Version

                SKL PCH H Dx Hsio Version

                SKL PCH LP Bx Hsio Version

                SKL PCH LP Cx Hsio Version

Handle 0x0027, DMI type 221, 54 bytes

OEM-specific Type

        Header and Data:

                DD 36 27 00 07 01 00 04 01 00 08 00 02 00 04 01

                00 08 00 03 00 04 01 00 00 00 04 05 FF FF FF FF

                FF 06 00 FF FF FF 05 00 07 00 FF FF FF 05 00 08

                00 FF FF FF 02 03

        Strings:

                Reference Code - SA - System Agent

                Reference Code - MRC

                SA - PCIe Version

                SA-CRID Status

                Disabled

                SA-CRID Original Value

                SA-CRID New Value

                OPROM - VBIOS

Handle 0x001D, DMI type 4, 48 bytes

Processor Information

        Socket Designation: CPU 1

        Type: Central Processor

        Family: Xeon

        Manufacturer: Intel(R) Corporation

        ID: E9 06 09 00 FF FB EB BF

        Signature: Type 0, Family 6, Model 158, Stepping 9

        Flags:

                FPU (Floating-point unit on-chip)

                VME (Virtual mode extension)

                DE (Debugging extension)

                PSE (Page size extension)

                TSC (Time stamp counter)

                MSR (Model specific registers)

                PAE (Physical address extension)

                MCE (Machine check exception)

                CX8 (CMPXCHG8 instruction supported)

                APIC (On-chip APIC hardware supported)

                SEP (Fast system call)

                MTRR (Memory type range registers)

                PGE (Page global enable)

                MCA (Machine check architecture)

                CMOV (Conditional move instruction supported)

                PAT (Page attribute table)

                PSE-36 (36-bit page size extension)

                CLFSH (CLFLUSH instruction supported)

                DS (Debug store)

                ACPI (ACPI supported)

                MMX (MMX technology supported)

                FXSR (FXSAVE and FXSTOR instructions supported)

                SSE (Streaming SIMD extensions)

                SSE2 (Streaming SIMD extensions 2)

                SS (Self-snoop)

                HTT (Multi-threading)

                TM (Thermal monitor supported)

                PBE (Pending break enabled)

        Version: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz

        Voltage: 0.9 V

        External Clock: 100 MHz

        Max Speed: 4200 MHz

        Current Speed: 3000 MHz

        Status: Populated, Enabled

        Upgrade: Other

        L1 Cache Handle: 0x001A

        L2 Cache Handle: 0x001B

        L3 Cache Handle: 0x001C

        Serial Number: To Be Filled By O.E.M.

        Asset Tag: To Be Filled By O.E.M.

        Part Number: To Be Filled By O.E.M.

        Core Count: 4

        Core Enabled: 4

        Thread Count: 4

        Characteristics:

                64-bit capable

                Multi-Core

                Execute Protection

                Enhanced Virtualization

                Power/Performance Control

Handle 0x0019, DMI type 7, 19 bytes

Cache Information

        Socket Designation: L1 Cache

        Configuration: Enabled, Not Socketed, Level 1

        Operational Mode: Write Through

        Location: Internal

        Installed Size: 128 kB

        Maximum Size: 128 kB

        Supported SRAM Types:

                Synchronous

        Installed SRAM Type: Synchronous

        Speed: Unknown

        Error Correction Type: Single-bit ECC

        System Type: Data

        Associativity: 8-way Set-associative

Handle 0x001A, DMI type 7, 19 bytes

Cache Information

        Socket Designation: L1 Cache

        Configuration: Enabled, Not Socketed, Level 1

        Operational Mode: Write Through

        Location: Internal

        Installed Size: 128 kB

        Maximum Size: 128 kB

        Supported SRAM Types:

                Synchronous

        Installed SRAM Type: Synchronous

        Speed: Unknown

        Error Correction Type: Parity

        System Type: Instruction

        Associativity: 8-way Set-associative

Handle 0x001B, DMI type 7, 19 bytes

Cache Information

        Socket Designation: L2 Cache

        Configuration: Enabled, Not Socketed, Level 2

        Operational Mode: Write Through

        Location: Internal

        Installed Size: 1024 kB

        Maximum Size: 1024 kB

        Supported SRAM Types:

                Synchronous

        Installed SRAM Type: Synchronous

        Speed: Unknown

        Error Correction Type: Multi-bit ECC

        System Type: Unified

        Associativity: 4-way Set-associative

Handle 0x001C, DMI type 7, 19 bytes

Cache Information

        Socket Designation: L3 Cache

        Configuration: Enabled, Not Socketed, Level 3

        Operational Mode: Write Back

        Location: Internal

        Installed Size: 8192 kB

        Maximum Size: 8192 kB

        Supported SRAM Types:

                Synchronous

        Installed SRAM Type: Synchronous

        Speed: Unknown

        Error Correction Type: Multi-bit ECC

        System Type: Unified

        Associativity: 16-way Set-associative

Handle 0x001E, DMI type 16, 23 bytes

Physical Memory Array

        Location: System Board Or Motherboard

        Use: System Memory

        Error Correction Type: Single-bit ECC

        Maximum Capacity: 64 GB

        Error Information Handle: Not Provided

        Number Of Devices: 4

Handle 0x000A, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: J6A1 - USB_1_2

        External Connector Type: Access Bus (USB)

        Port Type: USB

Handle 0x0028, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: JA5A1 - USB_3_4

        External Connector Type: Access Bus (USB)

        Port Type: USB

Handle 0x0029, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: JA5A1 - RMM4_NIC

        External Connector Type: RJ-45

        Port Type: Network Port

Handle 0x002A, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: JA7A1 - NIC 1

        External Connector Type: RJ-45

        Port Type: Network Port

Handle 0x002B, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: J6A2 - NIC 2

        External Connector Type: RJ-45

        Port Type: Network Port

Handle 0x002C, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: Not Specified

        Internal Connector Type: None

        External Reference Designator: J8A1 - VGA

        External Connector Type: DB-15 female

        Port Type: Video Port

Handle 0x002D, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J8K1 - TPM

        Internal Connector Type: Other

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Other

Handle 0x002E, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1J1 - USB_5_6

        Internal Connector Type: Other

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Other

Handle 0x002F, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1J2 - USB_7_8

        Internal Connector Type: Other

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Other

Handle 0x0030, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1K3 - USB_9

        Internal Connector Type: Access Bus (USB)

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: USB

Handle 0x0031, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J9A1 - SERIAL_A

        Internal Connector Type: DB-9 male

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Serial Port 16550A Compatible

Handle 0x0032, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J3B1 - RMM4 LITE

        Internal Connector Type: Other

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Other

Handle 0x0033, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J2K4 - SATA_0

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0034, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J2K2 - SATA_1

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0035, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J2K3 - SATA_2

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0036, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J2K1 - SATA_3

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0037, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1K5 - SATA_4

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0038, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1K2 - SATA_5

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x0039, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1K4 - SATA_6

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x003A, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1K1 - SATA_7

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x003B, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J1E1 - SATA M.2

        Internal Connector Type: SAS/SATA Plug Receptacle

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: SATA

Handle 0x003C, DMI type 8, 9 bytes

Port Connector Information

        Internal Reference Designator: J2G1 - M.2 SLOT1

        Internal Connector Type: Other

        External Reference Designator: Not Specified

        External Connector Type: None

        Port Type: Other

Handle 0x000B, DMI type 9, 17 bytes

System Slot Information

        Designation: J3B2 - slot 6

        Type: x8 PCI Express 3 x16

        Current Usage: Available

        Length: Long

        ID: 6

        Characteristics:

                3.3 V is provided

                PME signal is supported

                SMBus signal is supported

        Bus Address: 0000:00:01.0

Handle 0x000C, DMI type 10, 10 bytes

On Board Device 1 Information

        Type: Video

        Status: Enabled

        Description: ServerEngines Pilot III

On Board Device 2 Information

        Type: Ethernet

        Status: Enabled

        Description: Intel I210

On Board Device 3 Information

        Type: Ethernet

        Status: Enabled

        Description: Intel I210

Handle 0x000D, DMI type 12, 5 bytes

System Configuration Options

        Option 1: J4B1 2-3: Close to Force BMC Update Mode

        Option 2: J1F1 2-3: Close to Force ME Update Mode

        Option 3: J1F4 2-3: Close to clear Password

        Option 4: J7B1 2-3: Close for BIOS Recovery

        Option 5: J4C1 2-3: Close to clear CMOS

        Option 6: J1F5 2-3: Close to Force PLD Updating Mode

        Option 7: J9B2    : OPEN To inform users that chassis has been opened

        Option 8: J9K1    : RAID key

        Option 9: J9K2    : CLOSE To boot with MFG mode

Handle 0x000E, DMI type 17, 40 bytes

Memory Device

        Array Handle: 0x001E

        Error Information Handle: Not Provided

        Total Width: Unknown

        Data Width: Unknown

        Size: No Module Installed

        Form Factor: Unknown

        Set: None

        Locator: DIMM_A1

        Bank Locator: NODE 0 CHANNEL 0 DIMM 1

        Type: Unknown

        Type Detail: None

        Speed: Unknown

        Manufacturer: Empty/NO DIMM

        Serial Number: Not Specified

        Asset Tag: Not Specified

        Part Number: Not Specified

        Rank: Unknown

        Configured Clock Speed: Unknown

        Minimum Voltage: Unknown

        Maximum Voltage: Unknown

        Configured Voltage: Unknown

Handle 0x0010, DMI type 17, 40 bytes

Memory Device

        Array Handle: 0x001E

        Error Information Handle: Not Provided

        Total Width: Unknown

        Data Width: Unknown

        Size: No Module Installed

        Form Factor: Unknown

        Set: None

        Locator: DIMM_A2

        Bank Locator: NODE 0 CHANNEL 0 DIMM 2

        Type: Unknown

        Type Detail: None

        Speed: Unknown

        Manufacturer: Empty/NO DIMM

        Serial Number: Not Specified

        Asset Tag: Not Specified

        Part Number: Not Specified

        Rank: Unknown

        Configured Clock Speed: Unknown

        Minimum Voltage: Unknown

        Maximum Voltage: Unknown

        Configured Voltage: Unknown

Handle 0x001F, DMI type 17, 40 bytes

Memory Device

        Array Handle: 0x001E

        Error Information Handle: Not Provided

        Total Width: Unknown

        Data Width: Unknown

        Size: No Module Installed

        Form Factor: Unknown

        Set: None

        Locator: DIMM_B1

        Bank Locator: NODE 0 CHANNEL 1 DIMM 1

        Type: Unknown

        Type Detail: None

        Speed: Unknown

        Manufacturer: Empty/NO DIMM

        Serial Number: Not Specified

        Asset Tag: Not Specified

        Part Number: Not Specified

        Rank: Unknown

        Configured Clock Speed: Unknown

        Minimum Voltage: Unknown

        Maximum Voltage: Unknown

        Configured Voltage: Unknown

Handle 0x0020, DMI type 17, 40 bytes

Memory Device

        Array Handle: 0x001E

        Error Information Handle: Not Provided

        Total Width: 72 bits

        Data Width: 64 bits

        Size: 8192 MB

        Form Factor: DIMM

        Set: None

        Locator: DIMM_B2

        Bank Locator: NODE 0 CHANNEL 1 DIMM 2

        Type: DDR4

        Type Detail: Synchronous

        Speed: 2400 MHz

        Manufacturer: Kingston

        Serial Number: EB002C228

        Asset Tag: DIMM_B2_AssetTag

        Part Number: 9965643-006.A01G

        Rank: 1

        Configured Clock Speed: 2400 MHz

        Minimum Voltage: Unknown

        Maximum Voltage: Unknown

        Configured Voltage: 1.2 V

Handle 0x0003, DMI type 41, 11 bytes

Onboard Device

        Reference Designation: ServerEngines Pilot III

        Type: Video

        Status: Enabled

        Type Instance: 1

        Bus Address: 0000:01:00.0

Handle 0x0004, DMI type 41, 11 bytes

Onboard Device

        Reference Designation: PCH Integrated SATA Controller

        Type: SATA Controller

        Status: Enabled

        Type Instance: 1

        Bus Address: 0000:00:17.0

Handle 0x0005, DMI type 41, 11 bytes

Onboard Device

        Reference Designation: Intel I210

        Type: Ethernet

        Status: Enabled

        Type Instance: 1

        Bus Address: 0000:02:00.0

Handle 0x0021, DMI type 41, 11 bytes

Onboard Device

        Reference Designation: Intel I210

        Type: Ethernet

        Status: Enabled

        Type Instance: 2

        Bus Address: 0000:03:00.0

Handle 0x0022, DMI type 14, 8 bytes

Group Associations

        Name: $MEI

        Items: 1

                0x0000 (OEM-specific)

Handle 0x003D, DMI type 219, 81 bytes

OEM-specific Type

        Header and Data:

                DB 51 3D 00 01 03 01 45 03 0F 00 06 48 11 88 00

                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02

                01 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00

                00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00

                00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

                00

        Strings:

                MEI1

                MEI2

                MEI3

Handle 0x003E, DMI type 148, 48 bytes

OEM-specific Type

        Header and Data:

                94 30 3E 00 02 01 02 03 04 05 06 07 08 09 0A 0B

                0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B

                1C 1D 1E 1F 20 21 00 00 00 00 00 00 00 00 00 00

        Strings:

                S1200SP.86B.03.01.0026.092720170729

                 1.16.10925

                04.01.04.54

                SDR Package 0.26

                FRU Ver 0.01

                SDR File 0.26

                M36506E3_000000BA

                M2A906E9_0000005E

                N/A

                198046D0

                N/A

                0.0.215

                N/A

                N/A

                N/A

                N/A

                N/A

                72DACB44

                N/A

                2F3F5F52

                N/A

                D992BE32

                F6335F51

                17A36C11

                ECF7C827

                A86C0629

                62684D91

                386BE1ED

                0250B419

                3023B419

                46D789BD

                AA029E92

                N/A

Handle 0xFEFF, DMI type 127, 4 bytes

End Of Table

]# ipmitool sel elist

   1 | 01/23/2018 | 18:57:36 | Event Logging Disabled System Event Log | Log area reset/cleared | Asserted

   2 | 01/23/2018 | 18:58:06 | Power Unit Pwr Unit Status | Failure detected | Asserted

   3 | 01/23/2018 | 18:58:08 | Power Unit Pwr Unit Status | Power off/down | Asserted

   4 | 05/24/2018 | 03:14:53 | Power Unit Pwr Unit Status | AC lost | Asserted

   5 | 05/24/2018 | 03:14:53 | Processor P1 Status | Presence detected | Asserted

   6 | 05/24/2018 | 03:14:54 | Power Unit Pwr Unit Status | AC lost | Deasserted

   7 | 05/24/2018 | 03:14:55 | Power Unit Pwr Unit Status | Power off/down | Asserted

   8 | 05/24/2018 | 03:15:00 | Power Unit Pwr Unit Status | Power off/down | Deasserted

   9 | 05/24/2018 | 03:15:00 | Button Button | Power Button pressed | Asserted

   a | 05/24/2018 | 03:15:05 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted

   b | 05/24/2018 | 03:15:05 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted

   c | 05/24/2018 | 03:15:11 | Power Unit Pwr Unit Status | Power off/down | Asserted

   d | 05/24/2018 | 03:15:14 | Power Unit Pwr Unit Status | Power off/down | Deasserted

   e | 05/24/2018 | 03:18:23 | Power Unit Pwr Unit Status | Power off/down | Asserted

   f | 05/24/2018 | 03:18:25 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  10 | 05/24/2018 | 03:19:28 | Power Unit Pwr Unit Status | Power off/down | Asserted

  11 | 05/24/2018 | 03:19:30 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  12 | 05/24/2018 | 03:20:05 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  13 | 05/23/2018 | 19:36:45 | Button Button | Power Button pressed | Asserted

  14 | 05/23/2018 | 19:36:52 | Power Unit Pwr Unit Status | Power off/down | Asserted

  15 | 05/23/2018 | 19:36:52 | Button Button | Power Button pressed | Asserted

  16 | 05/23/2018 | 19:36:54 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  17 | 05/23/2018 | 19:37:41 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  18 | 05/23/2018 | 19:39:00 | Button Button | Power Button pressed | Asserted

  19 | 05/23/2018 | 19:39:06 | Button Button | Power Button pressed | Asserted

  1a | 05/23/2018 | 19:39:07 | Power Unit Pwr Unit Status | Power off/down | Asserted

  1b | 05/23/2018 | 19:39:09 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  1c | 05/23/2018 | 19:39:43 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  1d | 05/23/2018 | 19:44:07 | Button Button | Power Button pressed | Asserted

  1e | 05/23/2018 | 19:44:14 | Power Unit Pwr Unit Status | Power off/down | Asserted

  1f | 05/23/2018 | 19:44:15 | Button Button | Power Button pressed | Asserted

  20 | 05/23/2018 | 19:44:17 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  21 | 05/23/2018 | 19:44:50 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  22 | 05/23/2018 | 20:03:25 | Power Unit Pwr Unit Status | Power off/down | Asserted

  23 | 05/23/2018 | 20:03:28 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  24 | 05/23/2018 | 20:03:54 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  25 | 05/23/2018 | 20:51:43 | Power Unit Pwr Unit Status | Power off/down | Asserted

  26 | 06/04/2018 | 20:06:35 | Processor P1 Status | Presence detected | Asserted

  27 | 06/04/2018 | 20:06:40 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted

  28 | 06/04/2018 | 20:06:40 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted

  29 | 06/04/2018 | 20:07:01 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  2a | 06/04/2018 | 20:27:14 | Button Button | Power Button pressed | Asserted

  2b | 06/04/2018 | 20:27:26 | Power Unit Pwr Unit Status | Power off/down | Asserted

  2c | 06/04/2018 | 20:27:27 | Button Button | Power Button pressed | Asserted

  2d | 06/04/2018 | 20:27:28 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  2e | 06/04/2018 | 20:27:54 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  2f | 06/07/2018 | 16:01:58 | Power Unit Pwr Unit Status | Power off/down | Asserted

  30 | 06/07/2018 | 16:12:00 | Processor P1 Status | Presence detected | Asserted

  31 | 06/07/2018 | 16:12:05 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted

  32 | 06/07/2018 | 16:12:05 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted

  33 | 06/07/2018 | 16:12:25 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  34 | 06/07/2018 | 16:21:49 | Button Button | Power Button pressed | Asserted

  35 | 06/07/2018 | 16:22:04 | Power Unit Pwr Unit Status | Power off/down | Asserted

  36 | 06/07/2018 | 16:43:49 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  37 | 06/07/2018 | 16:43:49 | Button Button | Power Button pressed | Asserted

  38 | 06/07/2018 | 16:44:13 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  39 | 06/27/2018 | 16:17:10 | Power Unit Pwr Unit Status | Power off/down | Asserted

  3a | 06/27/2018 | 16:17:31 | Power Unit Pwr Unit Status | Power off/down | Deasserted

  3b | 06/27/2018 | 16:17:31 | Button Button | Power Button pressed | Asserted

  3c | 06/27/2018 | 16:17:56 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  3d | 06/27/2018 | 16:42:50 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

  3e | 06/27/2018 | 18:21:49 | Button Button | Power Button pressed | Asserted

  3f | 06/27/2018 | 18:22:02 | Power Unit Pwr Unit Status | Power off/down | Asserted

  40 | 06/27/2018 | 18:31:04 | Processor P1 Status | Presence detected | Asserted

  41 | 06/27/2018 | 18:31:10 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted

  42 | 06/27/2018 | 18:31:10 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted

  43 | 06/27/2018 | 18:31:29 | System Event BIOS Evt Sensor | OEM System boot event | Asserted

Hi, downloaded RAID Web Console 3 from here Download Intel® RAID Web Console 3 for Windows*

- Install the GATEWAY server on a remote machine, can log in ok.

- Installed the RAID driver version (SAS v6.713.05.00 (Trimode wont load, even though its listed there doesnt appear to be drivers in the package for this card)) for the RMS3CC090 on a S1200SPOR server running Windows 10 Pro

- Installed the DIRECT AGENT service for RAID Web Console 3 on the above server.

Logging in to the GATEWAY server, then pressing "Re-discover servers", this remote Windows 10 S1200SPOR with the RMS3CC080 never shows up.

We have disabled the firewall on the Windows 10 system

We have disabled the firewall on the gateway server

Is there no way of adding servers to the gateway server?

All documentation for Intel RAID Web Console 3 says the RMS3CC080 is fully supported...

Many Thanks

have a system with a S2600CP4 board. I would like to enable its KVM features by adding a remote management module RMM4

I configured the module in Bios

But in BMC web concole I see that the module is not installed:

Why it does not work?

Tell me where the motherboard S1200SP set SNMP version and community?

How to configure its monitoring on prtg?

I have a 2-socket R1208WFTYS system with the latest BIOS (00.01.0014) and it seems that there is a bug/inconsistency in regards to sub-NUMA activation in BIOS.

If I set "sub_NUMA Cluster" to "Enabled" and leave "IMC Interleaving" to "Auto", which suggests that BIOS will use the most appropriate settings (which has to be "1-way interleave"), then sub-NUMA is not activated - I see only two NUMA nodes (one per socket), whereas if I set "IMC Interleaving" to "1-way" explicitly, everything works as expected - I see 4 numa nodes (two for each socket).

So, since "IMC Interleaving" setting is tighly coupled to "sub_NUMA Cluster", "IMC Interleaving" should be removed altogether or at least "Auto" mode of it must be coordinated with "sub-NUMA" settings.

Hi,

I've been trying to get a KNL on the HNS7200AP compute module to post, but it seems to be stuck at post code 0x19: SB PEIM, and occasionally resets itself and ges stuck again. Are there any suggestions on how to debug this issue?

All help is appreciated.

Thanks,

Brian

Hello community!

  I am using Intel DBS2600CW2R mother board.

Full configuration is: 

•   Intel DBS2600CW2R
• 2x Intel(R) Xeon(R) CPU E5-2620 v4 @ 2.10GHz
• 2x Kingston 16Gb RAM
•   Adata M.2 64Gb
• Nvidia P4000

Event logs is empty.

Currently Ubuntu 160.4 LTS is installed - everything is ok.

I am trying to install Windows 10 from (https://www.microsoft.com/uk-ua/software-download/windows10ISO Apr 2018).

SATA is in AHCI mode.

Using UEFI mode.

Unfortunately got error: "media driver is missing error".

Drivers intel_chipset_win_10.1.17730.8089_PV didn't help me.

Change USB port didn't help me.

Please help me with that issue.

I want my motherboard SP1200SP boot from usb disk.

So I had change the BIOS-

-> advanced

--> USB configuration

--> Mass storage device

  6000 : from auto to "Harddisk"

Then I can see my USB disk in the list of Boot maintenance Manager.

But Strangely, it still cannot boot from usbdisk.

Is there anything I had made wrong setting?

btw, what is the meaning of "6000" ?

Thanks you all!

Should S1200SPLR board work with Xeon E3 1246 v6 without any BIOS update?

Just bought this mb and cpu (both brand new), after assembly, all i can see is below error code:

Short video of diagnostic LED below:

https://photos.app.goo.gl/zCQu11ieNJAhoBAEA

Unfortunately dont have any other compatible processor, is there anything i can do ? or just send it back to shop?

Hello,

I'd like to use SR-IOV for the virtualization of an XHCI host controller to passthrough to multiple VMs. Software USB passthrough is not an option in this setup, which is why I'm looking into SR-IOV.

According to the XHCI specification document (I accessed it via https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interfac… ) in Section 8 "Virtualization", there should be a possibility to use SR-IOV for XHCI controllers.

I tried on a system with Intel C610 server chipset, with SR-IOV enabled (tested the SR-IOV support and it is working with an I710 network card), to use it with the XHCI controller on the Chipset, but that one doesn't show the PCI express capability for SR-IOV.

I'm wondering if there is a chipset or external XHCI controller on which SR-IOV is actually usable? Or does Linux just not show the capability although the hardware is capable? Is there support for it in the Linux drivers (it doesn't seem so at a first glance on the code)? What is the plan on proceeding with XHCI IO Virtualization in the future?

Thanks a lot for your help.

Best Regards
Felix

I have a server with an S2600TP board and I have been testing trying to use the riser 2 slot for an additional PCIe card. I have tried using the riser from the AXXKPTPMIOM PCI Express rIOM kit, but if I connect any card that is PCI x16 the system will not power up (LED lights in the front and back turn amber and it beeps). If I put in just the empty carrier board (x8), the server boots fine. I have updated the BIOS to the latest version. Any suggestions?

Issue: Starting from production BIOS SE5C620.86B.00.01.0014.070920180847, when VROC Wolfpass x16 4-port retimer is connected to Riser 1, PCIe slot 1 (CPU0), the NVMe drives don’t show up in BIOS (UEFI Option ROM Control), Windows or Linux OS.

Reproducibility:  100%

Board:  Silver WolfPass system S2600WFT

BIOS settings: Default settings

Processors: verified on both Xeon Gold and Xeon Platinum Purley Skylake processors

Steps to reproduce: 

1. Connect VROC Wolfpass x16 4-port retimer to Riser 1, PCIe slot 1 (CPU0).

2. Connect Oculink to Oculink cables from retimer to Oculink connections on backplane.

3. Insert any Intel NVMe SSDs with U.2 form factor to drive slots where Oculink cables are connected to.

4. Notice with BIOS SE5C620.86B.00.01.0013.030920180427, the drives show up in UEFI Option ROM Control in BIOS.

5. Download production BIOS SE5C620.86B.00.01.0014.070920180847 from https://downloadcenter.intel.com/download/28001/?product=89015

6. Insert USB that contains above BMC/BIOS/ME/FD/FRU/SDR

7. Boot to BIOS and press F9 to load the defaults, then save and reboot

8. Boot to EFI Shell

9. Update BMC

10. Reboot and boot back into BIOS and notice NVMe drives still show up in UEFI Option ROM Control in BIOS.

11. Boot to EFI Shell

12. Update BIOS

13. Reboot and boot back into BIOS and notice NVMe drives no longer show up in UEFI Option ROM Control in BIOS.

Workarounds:

1. Downgrade to BIOS SE5C620.86B.00.01.0013.030920180427 and keep retimer connected to Riser 1, PCIe slot 1

or

2. Keep BIOS SE5C620.86B.00.01.0014.070920180847, but move retimer from Riser 1, PCIe slot 1 to Riser 2, PCIe slot 1 (CPU1)

Добрый день !

У меня подобная проблема которая тут обсуждалась. Ответа на вопрос я не нашёл и поэтому повторяю :

Remote Management Module key :     Installed

Device (BMC) Available :     Yes

BMC FW Build Time :     2018-06-07 11:48:53

BIOS ID :     SE5C610.86B.01.01.0027.071020182329

BMC FW Rev :     1.53.11210

Boot FW Rev :     1.07

SDR Package Version :     SDR Package 1.17

Mgmt Engine (ME) FW Rev :     03.01.03.050

Baseboard Serial Number :     BQTP61800321

Сенсоры в BMC WEB console :

VRD Hot    All deasserted    OK    0x0000

DIMM Thrm Mrgn 1    Normal     OK    -48 degrees C

DIMM Thrm Mrgn 2    Normal     Unknown    Not Available

DIMM Thrm Mrgn 3    Normal     OK    -51 degrees C

DIMM Thrm Mrgn 4    Normal     Unknown    Not Available

Agg Therm Mgn 1    Normal     OK    -7 degrees C

Постоянно, приблизительно каждые 5 минут в сфере vmware выходит сообщение о температуре на DIMM. Помогите от этого избавиться. 

for english :

Good afternoon !

At me a similar problem which here was discussed.I did not find the answer to the question and therefore I repeat:

Remote Management Module key: Installed
Device (BMC) Available: Yes
BMC FW Build Time: 2018-06-07 11:48:53
BIOS ID: SE5C610.86B.01.01.0027.071020182329
BMC FW Rev: 1.53.11210
Boot FW Rev: 1.07
SDR Package Version: SDR Package 1.17
Mgmt Engine (ME) FW Rev: 03.01.03.050
Baseboard Serial Number: BQTP61800321

Sensors:

VRD Hot All deasserted OK 0x0000
DIMM Thrm Mrgn 1 Normal OK -48 degrees C
DIMM Thrm Mrgn 2 Normal Unknown Not Available
DIMM Thrm Mrgn 3 Normal OK -51 degrees C
DIMM Thrm Mrgn 4 Normal Unknown Not Available
Agg Therm Mgn 1 Normal OK -7 degrees C

Constantly, approximately every 5 minutes in the vmware sphere there is a message about the temperature on the DIMM.

help please get rid of it.

The TPS for the S2600WF server board and the R2000WF series servers offer, in Appendix B (pages 120 and 125, respectively), a diagnostic LED decoder., as shown below.

I have a customer who reports POST fails, with a "32" on the video display, and
Amber : ON ONONoff Green: ON ONONoff seen on the rear diagnostic LEDs.

The POST progress code example tables (same pages) indicates that's a error hex code EE (or binary 1110 1110).

However, in the pages which follow, there is no error code EE(or binary 1110 1110)described in either TPS.

Tell me where the motherboard S1200SP set SNMP version and community?

How to configure its monitoring on prtg?

New build with E1230 v5 CPU, 2 x DDR4-233 ECC UDIMM, when powered up the led on the front and on the system board is green, I get 3 beeps and the fans start speeding up to a very high speed but no output to video. I have replaced the RAM in every slot arrangement possible. Tested  the RAM on a different board both sticks were good. Put the RAM from the other system on the server board with the same results. What is the next step? Do I send the board back?

Hi Intel Support Team,

Good day,

I have some questions regards with Intel Server board S2600CW2SR.

Basic installation was included for Ubuntu 16.04 as per checking to this URL:https://www.intel.sg/content/www/xa/en/support/articles/000006988/server-products/server-boards.html

May I know if installation of Chipset and onboard drivers are included and not just installing Ubuntu 16.04?

If yes, may we have the link and procedure on how to install the drivers for Intel Server board S2600CW2SR? Please advice us.

Hoping for quick response.