intel 5520UR + 2*Xeon E5620 как включить поддержку AES-NI?
Я обновил BIOS платы до версии R0066.
В ReleaseNotes_R0069.txt сказано:
R0050
================================================================================
FEATURES ADDED/REMOVED
================================================================================
*******;
11,AES-NI support changed to enabled.
******
как включить поддержку AES-NI ?
Came in this morning and the server is up and running. There is no video output. The keyboard lights are blinking in a pattern. 2 blinks - pause - one blink - pause - repeat. Keyboard, mouse and monitor all test good. I'm hesitant to reboot.
Any ideas?
While attempting to update the BIOS on an Intel S2600cp server system board I receive an error that says "The capsule file failed in the security compliance check. Please refer to BIOS release notes for details." The BIOS update doesn't complete successfully.
This is happening on two server boards that I just bought both used that that are both currently running BIOS version 1.04.2096.
I am attempting to update to Intel® Server Board S2600CP Firmware Update Package for EFI Version: 02.06.0006 which I have downloaded directly from the Intel website https://downloadcenter.intel.com/download/26957/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?product=61088.
What do I need to do to fix this issue?
I have followed the instructions on the website for creating the bootable flash drive for installing this BIOS update by formatting the drive with the FAT file system and then copying the extracted files directly to the thumb drive.
The flash drive boots fine, provides me with the usual option and I choose option 1 to update the firmware and then option 2 to update the BIOS. Or I get the same error if I choose option 2 to update the BIOS.
I even used the same thumb drive that had this BIOS update on it that I had previously used to update the BIOS on another S2600cp server board (that was running a newer version of the BIOS) and this other server board updated successfully and without any issues at all. Now I am unable to update the BIOS on these two other S2600cp server boards that are running the older BIOS version.
I have recreated this bootable flash drive, have created the bootable flash drive on a different flash drive, have reset the BIOS to the default settings, and have examined the BIOS settings but so far haven't found any solutions that have fixed this issue.
What else can I do to fix this issue so that I can successfully update to this latest version of the BIOS? Do I first need to update to a newer (but not the most recent version of the BIOS) and then I will be able to update to the latest BIOS version?
Is it possible to plug both SATA/SAS cable from motherboard and OCuLink cables to the same coordinating slots (that is for 8-drive 2.5" backplane I connect SATA/SATA0-3 connector and PCIe SSD #0,1,2,3 - Fig.36 from TPS R1000WF) so that I could plug SATA or NVMe to the same slot and backplane will route signals to SATA or OCuLink cable automagically (or by BIOS setting). I saw a "steering resistors" on fig. 3 "Server board architecture" in Technical Product Specification for R1000WF platform which imply that this scenario is possible?
Link to TPS Technical Specifications for the Intel® Server Board and Intel®...
Good Day.
I am tried enable "OS boot watchdog timer" at BIOS, but my OS (Window 10 - 1709) always rebooted.
I didnt find Intel Watchdog driver and i dont understand how i should install it.
I am really need your help.
How i should check this driver? Does this function support Windows 10?
| RMM Status : | Intel(R) RMM not installed |
| Device (BMC) Available : | Yes |
| BMC FW Build Time : | Mar 23 2017 20:14:24 |
| BIOS ID : | SE5C600.86B.02.06.0006.032420170950 |
| BMC FW Rev : | 01.28.10603 |
| Boot FW Rev : | 01.17 |
| SDR Package Version : | �� dd ddd |
| Mgmt Engine (ME) FW Rev : | 02.01.07.328 |
I have one Intel server R1304BB4DC and Intel disk chassis JBOD2312S2SP connected to the server via SFF-8080 to a SAS Expander.
I want to connect second disk chassis Intel JBOD2312S3SP.
Because of my Intel server hasn't free extension slots I want to connect second disk chassis through the first JBOD. Like this: R1304BB4DC <-- JBOD2312S2SP <-- JBOD2312S3SP
I think that for such connection I need to install to my first JBOD Interface Converter Board AXXSAS88CNVRT and SAS Expander RESCV360JBD from the list of Compatible Products of the JBOD2312S2SP
I suppose I need connect two SFF-8088 from JBOD2312S3SP to the Interface Converter Board in the JBOD2312S2SP. Then connect three (1 per 4 disks) SFF-8087 from Interface Converter Board AXXSAS88CNVRT to the SAS Expander RESCV360JBD.
Or I need just plug one HBA like LSI SAS 9207-8e to the Intel JBOD2312S2SP and connect to it second disk chassis JBOD2312S3SP?
In result, I want to get 24 disks in my server per 12 from each JBOD.
Please tell me whether I understood and appreciated all correctly.
Hello,
I would like to upgrade RAM on my Intel R1304BB4DC server.
I have installed 1 CPU E5-2407, so I have only 6 DIMM slots for the upgrade.
In the Intel ARC specification for my R1304BB4DC server written max memory capacity 384GB. The installed Intel Xeon E5-2407 supports 384GB as well.
That means for 1CPU and 6 DIMM slots I can get just 192GB, 32GB per slot.
Ok. So I need 6 RDIMMs by 32GB each.
But our supply department says that can't find DIMMs by a 32GB of capacity for this server.
Also Kingston, Crucial and Hynix sites not found 32GB DIMMs for Intel R1304BB4DC server.
I have found CMTL Tested Memory List for Intel® Server Board S2400BB Family and Intel® Server System R1000BB/R2000BB Families.
But In the CMTL list no DIMMs with 32GB capacity from Kingston, Crucial, Hynix or even Samsung or other known me, manufacturers.
Please help me find 32GB DDR3-1333 or DDR3-1600 RDIMM for my Intel R1304BB4DC server from Kingston, Crucial or Hynix.
Does the RMS3CC080 (RAID controller) support LUN scanning for Autoloaders when connected thru an RES3FV288 expander? Stand-alone tape drives work fine, but the Autoloader is on LUN 1...
Hi, downloaded RAID Web Console 3 from here Download Intel® RAID Web Console 3 for Windows*
- Install the GATEWAY server on a remote machine, can log in ok.
- Installed the RAID driver version (SAS v6.713.05.00 (Trimode wont load, even though its listed there doesnt appear to be drivers in the package for this card)) for the RMS3CC090 on a S1200SPOR server running Windows 10 Pro
- Installed the DIRECT AGENT service for RAID Web Console 3 on the above server.
Logging in to the GATEWAY server, then pressing "Re-discover servers", this remote Windows 10 S1200SPOR with the RMS3CC080 never shows up.
We have disabled the firewall on the Windows 10 system
We have disabled the firewall on the gateway server
Is there no way of adding servers to the gateway server?
All documentation for Intel RAID Web Console 3 says the RMS3CC080 is fully supported...
Many Thanks
Hello,
We have a problem with one server.
Issue:
There are two absolutely identical servers in the same power network. There are redundant PSU in each server. There are 2 CPUs are installed in each server. Time to time one of PSU is unplugged for some period of time. The first server works correctly.
But the second one gives such warning:
The speed of processor 6 in group 0 is being limited by system firmware. The processor has been in this reduced performance state for 71 seconds since the last report.
and also:
"The network interface "Intel(R) I350 Gigabit Network Connection #2" has begun resetting. There will be a momentary disruption in network connectivity while the hardware resets.
Reason: The network driver did not respond to an OID request in a timely fashion.
This network interface has reset 5 time(s) since it was last initialized."
"Intel(R) I350 Gigabit Network Connection #2
Network link is disconnected."
As a result server hungs up once in 2-3 weeks. It is a surveillance server.
What we tried to do:
- BIOS, FW and drivers - all are latest and greatest. Didin't help.
- Changed power plan to High Performance and also changed CPU minimum speed to 100% - didn't help
- Untick option "Allow to disable this device to save power" for LAN adapters. - didn't help.
Most interesting is that when there is one PSU plugged and working, there is no errors. When you plug the second PSU without power cord - errors appear. And it does not make any difference which PSU you try to unplug.
Seems like this problem is hardware related. But what shall we try to change? Power Distribution Module or motherboard?
Regards,
Sergei.
Hello. Can anyone suggest - will the ECC memory work on this combination of the motherboard and processor? Critical to me is the answer to this question - preferably with links to articles that support a negative or positive answer to my question, if possible. In advance thanks for the answer all who responded!
Здравствуйте. Может ли кто-нибудь подсказать - будет ли работать на указанном сочетании материнской платы и процессора оперативная память ECC? Для меня критически важен ответ на этот вопрос - желательно с ссылками на статьи, подтверждающими отрицательный или положительный ответ на мой вопрос, если можно. Заранее спасибо за ответ всем откликнувшимся.
I have s2400gp2 motherboard and QLogic Corporation NetXtreme II BCM57840 and card not work. Its possible to work card with this motherboard?
While attempting to update the BIOS on an Intel S2600cp server system board I receive an error that says "The capsule file failed in the security compliance check. Please refer to BIOS release notes for details." The BIOS update doesn't complete successfully.
This is happening on two server boards that I just bought both used that that are both currently running BIOS version 1.04.2096.
I am attempting to update to Intel® Server Board S2600CP Firmware Update Package for EFI Version: 02.06.0006 which I have downloaded directly from the Intel website https://downloadcenter.intel.com/download/26957/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?product=61088.
What do I need to do to fix this issue?
I have followed the instructions on the website for creating the bootable flash drive for installing this BIOS update by formatting the drive with the FAT file system and then copying the extracted files directly to the thumb drive.
The flash drive boots fine, provides me with the usual option and I choose option 1 to update the firmware and then option 2 to update the BIOS. Or I get the same error if I choose option 2 to update the BIOS.
I even used the same thumb drive that had this BIOS update on it that I had previously used to update the BIOS on another S2600cp server board (that was running a newer version of the BIOS) and this other server board updated successfully and without any issues at all. Now I am unable to update the BIOS on these two other S2600cp server boards that are running the older BIOS version.
I have recreated this bootable flash drive, have created the bootable flash drive on a different flash drive, have reset the BIOS to the default settings, and have examined the BIOS settings but so far haven't found any solutions that have fixed this issue.
What else can I do to fix this issue so that I can successfully update to this latest version of the BIOS? Do I first need to update to a newer (but not the most recent version of the BIOS) and then I will be able to update to the latest BIOS version?
HI WANT TO BUY DELL SERVER FOR SAP B1 SOFTWARE. WE WANT TO KNOW WHICH IS BEST PROCESSOR T430 AS BELOW. WHICH IS BEST FOR US?
Tower Model- T430
Part No-T430 - 2609
Intel® Xeon® E5-2609v4 (1.7GHz/ 8C / 15MB / 85W)/12 DIMMS/4X8(32- GB) DDR4/upto 8 Drives (3.5inch) Hot Plug SATA/ 2X1(2-TB) SATA (3.5 inch) 7.2K RPM/RAID 0,1,5 (H330)/DVD Writer/2X1 inbuilt (495W)/3 Yrs. Pro-Support & Mission Critical/ 24x7 4Hr Onsite / Kit - Single, Hot-plug Power Supply, 495W
Microsoft Windows Server 2016 STD OEM License
OR
PowerEdge T440 Server
Components
1
Motherboard
1
Intel Xeon Silver 4110 2.1G, 8C/16T, 9.6GT/s , 11M Cache, Turbo, HT (85W) DDR4-2400
1
Chassis with up to 16, 2.5" Hot Plug Hard Drives, Tower Configuration
1
Dell EMC Logo Push Pin
1
Security Bezel
1
PowerEdge T440 Shipping Material
1
2666MT/s RDIMMs
1
Performance Optimized
2
16GB RDIMM, 2666MT/s, Dual Rank
1
No Additional Processor
1
iDRAC9,Enterprise
3
600GB 10K RPM SAS 12Gbps 512n 2.5in Hot-plug Hard Drive
1
PERC H330 RAID Controller, Adapter, Full Height
1
Standard Heat Sink for Less = 150W
1
No Internal Optical Drive
1
No Internal Optical Drive
2
Jumper Cord,10A,4M,C13/C14 (India BIS)
1
Dual, Hot-plug, Redundant Power Supply (1+1), 495W
1
Trusted Platform Module 1.2
1
Dual-Port 1GbE On-Board LOM
1
No Operating System
1
Casters, T440
1
RAID 5
1
OME Server Configuration Management
Software
1
Performance BIOS Settings
1
No Systems Documentation, No OpenManage DVD Kit
Service
1
Technical Support
1
Limited Warranty:Yr1 (Labor)
1
Limited Warranty:Yr1 (Parts)
1
3Yr ProSupport: Next Business Day Onsite Service
1
Yr2-3 ProSupport:Next Business Day Onsite Service
1
3Yr ProSupport:(7x24) Technical Support & Assistance
1
No Remote Advisory Services Purchased
Microsoft Windows Server 2016 Standard License
I have one Intel server R1304BB4DC and Intel disk chassis JBOD2312S2SP connected to the server via SFF-8080 to a SAS Expander.
I want to connect second disk chassis Intel JBOD2312S3SP.
Because of my Intel server hasn't free extension slots I want to connect second disk chassis through the first JBOD. Like this: R1304BB4DC <-- JBOD2312S2SP <-- JBOD2312S3SP
I think that for such connection I need to install to my first JBOD Interface Converter Board AXXSAS88CNVRT and SAS Expander RESCV360JBD from the list of Compatible Products of the JBOD2312S2SP
I suppose I need connect two SFF-8088 from JBOD2312S3SP to the Interface Converter Board in the JBOD2312S2SP. Then connect three (1 per 4 disks) SFF-8087 from Interface Converter Board AXXSAS88CNVRT to the SAS Expander RESCV360JBD.
Or I need just plug one HBA like LSI SAS 9207-8e to the Intel JBOD2312S2SP and connect to it second disk chassis JBOD2312S3SP?
In result, I want to get 24 disks in my server per 12 from each JBOD.
Please tell me whether I understood and appreciated all correctly.
Hi experts,
we are having an issue with unusual high noise level of the fans of one R2308WFTZ Server System. For whatever reason the system fans seem to have a high rpm even if the system is not under load. They basically speed up at the boot of the unit and never deacrease (or increase).
The system events are showing following messages which may indicate a problem with the fans!?:
07/19/2018-08:51:01 Fan,Fan 1 Present (#0x40) Informational event: Fan 1 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2754 07/19/2018-08:51:01 Fan,Fan 2 Present (#0x41) Informational event: Fan 2 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2755 07/19/2018-08:51:01 Fan,Fan 3 Present (#0x42) Informational event: Fan 3 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2756 07/19/2018-08:51:01 Fan,Fan 4 Present (#0x43) Informational event: Fan 4 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2757 07/19/2018-08:51:01 Fan,Fan 5 Present (#0x44) Informational event: Fan 5 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2758 07/19/2018-08:51:01 Fan,Fan 6 Present (#0x45) Informational event: Fan 6 Present reports the device has been inserted or is present. Integrated BMC - LUN#0 (Channel#0)
2759 07/19/2018-08:51:01 Fan,Fan Redundancy (#0x0C) Warning event: Fan Redundancy reports Redundancy Lost: Entered any non-redundant state, including Nonredundant: Insufficient Resources . Integrated BMC - LUN#0 (Channel#0)
2760 07/19/2018-08:51:01 Fan,Fan Redundancy (#0x0C) CRITICAL event: Fan Redundancy reports Non-redundant: Insufficient Resources, the unit is non-redundant and has insufficient resources to maintain normal operation. Integrated BMC - LUN#0 (Channel#0)
2761 07/19/2018-08:51:01 Fan,Fan Redundancy (#0x0C) Informational event: Fan Redundancy reports Fully Redundant: Indicates that full redundancy has been regained . Integrated BMC - LUN#0 (Channel#0)
2762 07/19/2018-08:51:01 Fan,Fan Redundancy (#0x0C) Informational event: Fan Redundancy reports redundancy has been regained. Integrated BMC - LUN#0 (Channel#0)
2763 07/19/2018-08:51:01 Fan,Fan Redundancy (#0x0C) Informational event: Fan Redundancy reports Non-redundant: Insufficient Resources, the unit is non-redundant and has sufficient resources to maintain normal operation. Integrated BMC - LUN#0 (Channel#0)
However all 6 fans are working normally (but with high rpm)...
What could be the issue? What can we do?
Thanks
I have an Intel Xeon D-1500 family processor.
I need to know the addresses of the following registers GPIO_USE_SEL, GP_IO_SEL, GPI_ROUT etc.
Is there a document that shows these addresses?
have a system with a S2600CP4 board. I would like to enable its KVM features by adding a remote management module RMM4
I configured the module in Bios
But in BMC web concole I see that the module is not installed:
Why it does not work?
Continuing from my earlier post at Random fan spin-up on R1304SPOSHBNR
It has been a while, but I now have an additional unit, this time with Intel certified memory, that is experiencing the same symptoms. Namely, at random intervals, ranging from 15 minutes to a few hours, the fans will spin up to full speed for a few seconds before returning to normal speed. I narrowed the cause down to the P1 Therm Margin sensor, which will occasionally be unreadable for a moment. See the attached video file to see this in action.
These servers are all running CentOS Linux.
# dmidecode 3.0
Getting SMBIOS data from sysfs.
SMBIOS 2.7 present.
64 structures occupying 3771 bytes.
Table at 0x80630000.
Handle 0x0001, DMI type 221, 12 bytes
OEM-specific Type
Header and Data:
DD 0C 01 00 01 01 00 04 01 00 08 00
Strings:
Reference Code - ACPI
Handle 0x0002, DMI type 133, 12 bytes
OEM-specific Type
Header and Data:
85 0C 02 00 00 50 F9 81 00 40 00 00
Handle 0x0006, DMI type 0, 24 bytes
BIOS Information
Vendor: Intel Corporation
Version: S1200SP.86B.03.01.0026.092720170729
Release Date: 09/27/2017
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 16384 kB
Characteristics:
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 0.0
Firmware Revision: 0.0
Handle 0x0007, DMI type 1, 27 bytes
System Information
Manufacturer: Intel Corporation
Product Name: S1200SP
Version: R1304SPOSHBNR
Serial Number: QSCD80400069
UUID: C81BB18B-33EF-E711-AB21-A4BF012C036E
Wake-up Type: Power Switch
SKU Number: SKU Number
Family: Family
Handle 0x0008, DMI type 2, 17 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: S1200SP
Version: H57534-270
Serial Number: QSSA80100236
Asset Tag: Base Board Asset Tag
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: Part Component
Chassis Handle: 0x0000
Type: Motherboard
Contained Object Handles: 0
Handle 0x0009, DMI type 3, 24 bytes
Chassis Information
Manufacturer: ...............................
Type: Rack Mount Chassis
Lock: Not Present
Version: ..................
Serial Number: ..................
Asset Tag: ....................
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: Unspecified
Contained Elements: 0
SKU Number: Not Specified
Handle 0x000F, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.
Handle 0x0011, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0012, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x000B
Type: Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not Specified
Handle 0x0013, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: System Management Module
Status: <OUT OF SPEC>
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown
Handle 0x0014, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x0015, DMI type 34, 11 bytes
Management Device
Description: UNKNOWN
Type: Unknown
Address: 0x00000000
Address Type: Unknown
Handle 0x0016, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x000D
Component Handle: 0x000A
Threshold Handle: 0x000F
Handle 0x0017, DMI type 36, 16 bytes
Management Device Threshold Data
Handle 0x0018, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Present, Unknown
Type: Unknown
Input Voltage Range Switching: Unknown
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0000
Cooling Device Handle: 0x000A
Input Current Probe Handle: 0x0000
Handle 0x0023, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x001FFFFFFFF
Range Size: 8 GB
Physical Array Handle: 0x001E
Partition Width: 1
Handle 0x0024, DMI type 24, 5 bytes
Hardware Security
Power-On Password Status: Not Implemented
Keyboard Password Status: Not Implemented
Administrator Password Status: Disabled
Front Panel Reset Status: Disabled
Handle 0x0000, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA2 (I/O)
Register Spacing: Successive Byte Boundaries
Handle 0x0025, DMI type 221, 26 bytes
OEM-specific Type
Header and Data:
DD 1A 25 00 03 01 00 04 01 00 08 00 02 00 00 00
00 5E 00 03 00 00 05 00 00 00
Strings:
Reference Code - CPU
uCode Version
TXT ACM version
Handle 0x0026, DMI type 221, 68 bytes
OEM-specific Type
Header and Data:
DD 44 26 00 09 01 00 04 01 00 08 00 02 03 FF FF
FF FF FF 04 00 FF FF FF 31 00 05 00 FF FF FF 31
00 06 00 FF FF FF FF FF 07 00 3E 00 00 00 00 08
00 34 00 00 00 00 09 00 3E 00 00 00 00 0A 00 34
00 00 00 00
Strings:
Reference Code - SKL PCH
PCH-CRID Status
Disabled
PCH-CRID Original Value
PCH-CRID New Value
OPROM - RST - RAID
SKL PCH H Bx Hsio Version
SKL PCH H Dx Hsio Version
SKL PCH LP Bx Hsio Version
SKL PCH LP Cx Hsio Version
Handle 0x0027, DMI type 221, 54 bytes
OEM-specific Type
Header and Data:
DD 36 27 00 07 01 00 04 01 00 08 00 02 00 04 01
00 08 00 03 00 04 01 00 00 00 04 05 FF FF FF FF
FF 06 00 FF FF FF 05 00 07 00 FF FF FF 05 00 08
00 FF FF FF 02 03
Strings:
Reference Code - SA - System Agent
Reference Code - MRC
SA - PCIe Version
SA-CRID Status
Disabled
SA-CRID Original Value
SA-CRID New Value
OPROM - VBIOS
Handle 0x001D, DMI type 4, 48 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Xeon
Manufacturer: Intel(R) Corporation
ID: E9 06 09 00 FF FB EB BF
Signature: Type 0, Family 6, Model 158, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Xeon(R) CPU E3-1220 v6 @ 3.00GHz
Voltage: 0.9 V
External Clock: 100 MHz
Max Speed: 4200 MHz
Current Speed: 3000 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x001A
L2 Cache Handle: 0x001B
L3 Cache Handle: 0x001C
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Core Count: 4
Core Enabled: 4
Thread Count: 4
Characteristics:
64-bit capable
Multi-Core
Execute Protection
Enhanced Virtualization
Power/Performance Control
Handle 0x0019, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x001A, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1 Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Parity
System Type: Instruction
Associativity: 8-way Set-associative
Handle 0x001B, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2 Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 4-way Set-associative
Handle 0x001C, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3 Cache
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 kB
Maximum Size: 8192 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x001E, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Single-bit ECC
Maximum Capacity: 64 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: J6A1 - USB_1_2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0028, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: JA5A1 - USB_3_4
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0029, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: JA5A1 - RMM4_NIC
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x002A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: JA7A1 - NIC 1
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x002B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: J6A2 - NIC 2
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x002C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: J8A1 - VGA
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x002D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8K1 - TPM
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1J1 - USB_5_6
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x002F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1J2 - USB_7_8
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0030, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1K3 - USB_9
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x0031, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - SERIAL_A
Internal Connector Type: DB-9 male
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Serial Port 16550A Compatible
Handle 0x0032, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3B1 - RMM4 LITE
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0033, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2K4 - SATA_0
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0034, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2K2 - SATA_1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0035, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2K3 - SATA_2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0036, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2K1 - SATA_3
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0037, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1K5 - SATA_4
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0038, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1K2 - SATA_5
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0039, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1K4 - SATA_6
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x003A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1K1 - SATA_7
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x003B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1E1 - SATA M.2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x003C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - M.2 SLOT1
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x000B, DMI type 9, 17 bytes
System Slot Information
Designation: J3B2 - slot 6
Type: x8 PCI Express 3 x16
Current Usage: Available
Length: Long
ID: 6
Characteristics:
3.3 V is provided
PME signal is supported
SMBus signal is supported
Bus Address: 0000:00:01.0
Handle 0x000C, DMI type 10, 10 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: ServerEngines Pilot III
On Board Device 2 Information
Type: Ethernet
Status: Enabled
Description: Intel I210
On Board Device 3 Information
Type: Ethernet
Status: Enabled
Description: Intel I210
Handle 0x000D, DMI type 12, 5 bytes
System Configuration Options
Option 1: J4B1 2-3: Close to Force BMC Update Mode
Option 2: J1F1 2-3: Close to Force ME Update Mode
Option 3: J1F4 2-3: Close to clear Password
Option 4: J7B1 2-3: Close for BIOS Recovery
Option 5: J4C1 2-3: Close to clear CMOS
Option 6: J1F5 2-3: Close to Force PLD Updating Mode
Option 7: J9B2 : OPEN To inform users that chassis has been opened
Option 8: J9K1 : RAID key
Option 9: J9K2 : CLOSE To boot with MFG mode
Handle 0x000E, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM_A1
Bank Locator: NODE 0 CHANNEL 0 DIMM 1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Empty/NO DIMM
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0010, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM_A2
Bank Locator: NODE 0 CHANNEL 0 DIMM 2
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Empty/NO DIMM
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x001F, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: Unknown
Set: None
Locator: DIMM_B1
Bank Locator: NODE 0 CHANNEL 1 DIMM 1
Type: Unknown
Type Detail: None
Speed: Unknown
Manufacturer: Empty/NO DIMM
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Configured Clock Speed: Unknown
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: Unknown
Handle 0x0020, DMI type 17, 40 bytes
Memory Device
Array Handle: 0x001E
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 8192 MB
Form Factor: DIMM
Set: None
Locator: DIMM_B2
Bank Locator: NODE 0 CHANNEL 1 DIMM 2
Type: DDR4
Type Detail: Synchronous
Speed: 2400 MHz
Manufacturer: Kingston
Serial Number: EB002C228
Asset Tag: DIMM_B2_AssetTag
Part Number: 9965643-006.A01G
Rank: 1
Configured Clock Speed: 2400 MHz
Minimum Voltage: Unknown
Maximum Voltage: Unknown
Configured Voltage: 1.2 V
Handle 0x0003, DMI type 41, 11 bytes
Onboard Device
Reference Designation: ServerEngines Pilot III
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:01:00.0
Handle 0x0004, DMI type 41, 11 bytes
Onboard Device
Reference Designation: PCH Integrated SATA Controller
Type: SATA Controller
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:17.0
Handle 0x0005, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Intel I210
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:02:00.0
Handle 0x0021, DMI type 41, 11 bytes
Onboard Device
Reference Designation: Intel I210
Type: Ethernet
Status: Enabled
Type Instance: 2
Bus Address: 0000:03:00.0
Handle 0x0022, DMI type 14, 8 bytes
Group Associations
Name: $MEI
Items: 1
0x0000 (OEM-specific)
Handle 0x003D, DMI type 219, 81 bytes
OEM-specific Type
Header and Data:
DB 51 3D 00 01 03 01 45 03 0F 00 06 48 11 88 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 02
01 00 00 80 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
Strings:
MEI1
MEI2
MEI3
Handle 0x003E, DMI type 148, 48 bytes
OEM-specific Type
Header and Data:
94 30 3E 00 02 01 02 03 04 05 06 07 08 09 0A 0B
0C 0D 0E 0F 10 11 12 13 14 15 16 17 18 19 1A 1B
1C 1D 1E 1F 20 21 00 00 00 00 00 00 00 00 00 00
Strings:
S1200SP.86B.03.01.0026.092720170729
1.16.10925
04.01.04.54
SDR Package 0.26
FRU Ver 0.01
SDR File 0.26
M36506E3_000000BA
M2A906E9_0000005E
N/A
198046D0
N/A
0.0.215
N/A
N/A
N/A
N/A
N/A
72DACB44
N/A
2F3F5F52
N/A
D992BE32
F6335F51
17A36C11
ECF7C827
A86C0629
62684D91
386BE1ED
0250B419
3023B419
46D789BD
AA029E92
N/A
Handle 0xFEFF, DMI type 127, 4 bytes
End Of Table
]# ipmitool sel elist
1 | 01/23/2018 | 18:57:36 | Event Logging Disabled System Event Log | Log area reset/cleared | Asserted
2 | 01/23/2018 | 18:58:06 | Power Unit Pwr Unit Status | Failure detected | Asserted
3 | 01/23/2018 | 18:58:08 | Power Unit Pwr Unit Status | Power off/down | Asserted
4 | 05/24/2018 | 03:14:53 | Power Unit Pwr Unit Status | AC lost | Asserted
5 | 05/24/2018 | 03:14:53 | Processor P1 Status | Presence detected | Asserted
6 | 05/24/2018 | 03:14:54 | Power Unit Pwr Unit Status | AC lost | Deasserted
7 | 05/24/2018 | 03:14:55 | Power Unit Pwr Unit Status | Power off/down | Asserted
8 | 05/24/2018 | 03:15:00 | Power Unit Pwr Unit Status | Power off/down | Deasserted
9 | 05/24/2018 | 03:15:00 | Button Button | Power Button pressed | Asserted
a | 05/24/2018 | 03:15:05 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted
b | 05/24/2018 | 03:15:05 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted
c | 05/24/2018 | 03:15:11 | Power Unit Pwr Unit Status | Power off/down | Asserted
d | 05/24/2018 | 03:15:14 | Power Unit Pwr Unit Status | Power off/down | Deasserted
e | 05/24/2018 | 03:18:23 | Power Unit Pwr Unit Status | Power off/down | Asserted
f | 05/24/2018 | 03:18:25 | Power Unit Pwr Unit Status | Power off/down | Deasserted
10 | 05/24/2018 | 03:19:28 | Power Unit Pwr Unit Status | Power off/down | Asserted
11 | 05/24/2018 | 03:19:30 | Power Unit Pwr Unit Status | Power off/down | Deasserted
12 | 05/24/2018 | 03:20:05 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
13 | 05/23/2018 | 19:36:45 | Button Button | Power Button pressed | Asserted
14 | 05/23/2018 | 19:36:52 | Power Unit Pwr Unit Status | Power off/down | Asserted
15 | 05/23/2018 | 19:36:52 | Button Button | Power Button pressed | Asserted
16 | 05/23/2018 | 19:36:54 | Power Unit Pwr Unit Status | Power off/down | Deasserted
17 | 05/23/2018 | 19:37:41 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
18 | 05/23/2018 | 19:39:00 | Button Button | Power Button pressed | Asserted
19 | 05/23/2018 | 19:39:06 | Button Button | Power Button pressed | Asserted
1a | 05/23/2018 | 19:39:07 | Power Unit Pwr Unit Status | Power off/down | Asserted
1b | 05/23/2018 | 19:39:09 | Power Unit Pwr Unit Status | Power off/down | Deasserted
1c | 05/23/2018 | 19:39:43 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
1d | 05/23/2018 | 19:44:07 | Button Button | Power Button pressed | Asserted
1e | 05/23/2018 | 19:44:14 | Power Unit Pwr Unit Status | Power off/down | Asserted
1f | 05/23/2018 | 19:44:15 | Button Button | Power Button pressed | Asserted
20 | 05/23/2018 | 19:44:17 | Power Unit Pwr Unit Status | Power off/down | Deasserted
21 | 05/23/2018 | 19:44:50 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
22 | 05/23/2018 | 20:03:25 | Power Unit Pwr Unit Status | Power off/down | Asserted
23 | 05/23/2018 | 20:03:28 | Power Unit Pwr Unit Status | Power off/down | Deasserted
24 | 05/23/2018 | 20:03:54 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
25 | 05/23/2018 | 20:51:43 | Power Unit Pwr Unit Status | Power off/down | Asserted
26 | 06/04/2018 | 20:06:35 | Processor P1 Status | Presence detected | Asserted
27 | 06/04/2018 | 20:06:40 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted
28 | 06/04/2018 | 20:06:40 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted
29 | 06/04/2018 | 20:07:01 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
2a | 06/04/2018 | 20:27:14 | Button Button | Power Button pressed | Asserted
2b | 06/04/2018 | 20:27:26 | Power Unit Pwr Unit Status | Power off/down | Asserted
2c | 06/04/2018 | 20:27:27 | Button Button | Power Button pressed | Asserted
2d | 06/04/2018 | 20:27:28 | Power Unit Pwr Unit Status | Power off/down | Deasserted
2e | 06/04/2018 | 20:27:54 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
2f | 06/07/2018 | 16:01:58 | Power Unit Pwr Unit Status | Power off/down | Asserted
30 | 06/07/2018 | 16:12:00 | Processor P1 Status | Presence detected | Asserted
31 | 06/07/2018 | 16:12:05 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted
32 | 06/07/2018 | 16:12:05 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted
33 | 06/07/2018 | 16:12:25 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
34 | 06/07/2018 | 16:21:49 | Button Button | Power Button pressed | Asserted
35 | 06/07/2018 | 16:22:04 | Power Unit Pwr Unit Status | Power off/down | Asserted
36 | 06/07/2018 | 16:43:49 | Power Unit Pwr Unit Status | Power off/down | Deasserted
37 | 06/07/2018 | 16:43:49 | Button Button | Power Button pressed | Asserted
38 | 06/07/2018 | 16:44:13 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
39 | 06/27/2018 | 16:17:10 | Power Unit Pwr Unit Status | Power off/down | Asserted
3a | 06/27/2018 | 16:17:31 | Power Unit Pwr Unit Status | Power off/down | Deasserted
3b | 06/27/2018 | 16:17:31 | Button Button | Power Button pressed | Asserted
3c | 06/27/2018 | 16:17:56 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
3d | 06/27/2018 | 16:42:50 | System Event BIOS Evt Sensor | OEM System boot event | Asserted
3e | 06/27/2018 | 18:21:49 | Button Button | Power Button pressed | Asserted
3f | 06/27/2018 | 18:22:02 | Power Unit Pwr Unit Status | Power off/down | Asserted
40 | 06/27/2018 | 18:31:04 | Processor P1 Status | Presence detected | Asserted
41 | 06/27/2018 | 18:31:10 | Drive Slot / Bay HDD 0 Status | Drive Present | Asserted
42 | 06/27/2018 | 18:31:10 | Drive Slot / Bay HDD 1 Status | Drive Present | Asserted
43 | 06/27/2018 | 18:31:29 | System Event BIOS Evt Sensor | OEM System boot event | Asserted