Is it possible to plug both SATA/SAS cable from motherboard and OCuLink cables to the same coordinating slots (that is for 8-drive 2.5" backplane I connect SATA/SATA0-3 connector and PCIe SSD #0,1,2,3 - Fig.36 from TPS R1000WF) so that I could plug SATA or NVMe to the same slot and backplane will route signals to SATA or OCuLink cable automagically (or by BIOS setting). I saw a "steering resistors" on fig. 3 "Server board architecture" in Technical Product Specification for R1000WF platform which imply that this scenario is possible?

Link to TPS Technical Specifications for the Intel® Server Board and Intel®...

Hello. Where i can find information about the compatibility of the backplane boards with the server P4308CP4MEN?

I have one Intel server R1304BB4DC and Intel disk chassis JBOD2312S2SP connected to the server via SFF-8080 to a SAS Expander.

I want to connect second disk chassis Intel JBOD2312S3SP.

Because of my Intel server hasn't free extension slots I want to connect second disk chassis through the first JBOD. Like this: R1304BB4DC <-- JBOD2312S2SP <-- JBOD2312S3SP

I think that for such connection I need to install to my first JBOD Interface Converter Board AXXSAS88CNVRT and SAS Expander RESCV360JBD from the list of Compatible Products of the JBOD2312S2SP
I suppose I need connect two SFF-8088 from JBOD2312S3SP to the Interface Converter Board in the JBOD2312S2SP. Then connect three (1 per 4 disks) SFF-8087 from Interface Converter Board AXXSAS88CNVRT to the SAS Expander RESCV360JBD.
Or I need just plug one HBA like LSI SAS 9207-8e to the Intel JBOD2312S2SP and connect to it second disk chassis JBOD2312S3SP?

In result, I want to get 24 disks in my server per 12 from each JBOD.

Please tell me whether I understood and appreciated all correctly.

Hi

Intel® R1304WT2GSR with Adaptec RAID 8405E controller. Can't install Microsoft Windows Server 2012 R2. Do not find RAID drivers.

Tried to use Intel® RSTe AHCI & SCU Software RAID Driver для Windows* (RSTe_and_AHCI_Win_Drivers_GUI_CLI_CIM_4.6.0.1085.zip) - does not help.

What drivers should I use?

Hi ...

I have installed Mesh commander 0.6.3 it on a computer with windows 7 since a mini pcs calling system with intel v10 has been implemented in my workplace.

Currently, I have added more than 60 mini-pcs.
They are brand plexus with intel  v10 ...
But 9 of them have been installed with professsional windows7 and when I try to access them with remote desktop it gives me timeout ...

However, about 58 computers with the same hardware but with the fedora linux distribution, I can access by remote control without problems and restart them and interact with the desktop ...


I would have to configure some parameter in the mesh commander or in the minipcs with w7 professional to be able to access by remote control and interact in the desktop as with the linux (fedora)? ....

A thousand thanks...

We are using these units in our lab with Intel Sawtooth Pass chassis and it worked well, until lately when Java JRE update was pushed. Now when we do a  the KVM redirection that launches the Java app and we try access the BIOS or choose the boot menu, the app comes up with a Dialog that says Network Disconnected. When that happens the BMC GUI dies and you cannot also query the server via ipmitool over LAN.. The only way to reset is to do an AC reset if you are connected to a LAN PDU or go to the server and pull your AC and re connect. Unfortunately we cannot go back to old version of Java as Oracle has locked that, plus IT will probably push the new versions.

Is there a solution. I tested this personally on 18 servers. I even replaced the RMMs. Many of our colleagues will be affected if they installed thes

The certificate seems to have expired as well. Where can we get a new certificate?

Hi, downloaded RAID Web Console 3 from here Download Intel® RAID Web Console 3 for Windows*

- Install the GATEWAY server on a remote machine, can log in ok.

- Installed the RAID driver version (SAS v6.713.05.00 (Trimode wont load, even though its listed there doesnt appear to be drivers in the package for this card)) for the RMS3CC090 on a S1200SPOR server running Windows 10 Pro

- Installed the DIRECT AGENT service for RAID Web Console 3 on the above server.

Logging in to the GATEWAY server, then pressing "Re-discover servers", this remote Windows 10 S1200SPOR with the RMS3CC080 never shows up.

We have disabled the firewall on the Windows 10 system

We have disabled the firewall on the gateway server

Is there no way of adding servers to the gateway server?

All documentation for Intel RAID Web Console 3 says the RMS3CC080 is fully supported...

Many Thanks

Good Day.

I am tried enable "OS boot watchdog timer" at BIOS, but my OS (Window 10 - 1709) always rebooted.

I didnt find Intel Watchdog driver and i dont understand how i should install it.

I am really need your help.

How i should check this driver? Does this function support Windows 10?

1528639113  [Hardware Error]: CPU 0: Machine Check Exception: 4 Bank 8: ba000000008000b0

1528639113 [Hardware Error]: TSC 3ebd3306cc3d8

1528639113 [Hardware Error]: PROCESSOR 0:206c2 TIME 1528639113 SOCKET 0 APIC 0

1528639113 [Hardware Error]: Run the above through 'mcelog --ascii'

1528639113 [Hardware Error]: Machine check: Processor context corrupt

1528639113 Kernel panic - not syncing: Fatal Machine check

1528639113 Pid: 0, comm: swapper Tainted: P   M       ---------------    2.6.32-358.76.1.el6.x86_64 #1

1528639113 Call Trace:

1528639113  <#MC>  [<ffffffff8150ec7f>] ? panic+0xa7/0x16f

1528639113  [<ffffffff81025f9f>] ? mce_panic+0x20f/0x230

1528639113  [<ffffffff81027528>] ? do_machine_check+0xa28/0xa70

1528639113  [<ffffffff8151219c>] ? machine_check+0x1c/0x30

1528639113  [<ffffffff81014912>] ? poll_idle+0x42/0xb0

1528639113  <<EOE>>  [<ffffffff81009fc6>] ? cpu_idle+0xb6/0x110

1528639113  [<ffffffff815087ed>] ? start_secondary+0x2ac/0x2ef

1528639114

1528639114

1528639114 Copyright (C) 2010 Alcatel-Lucent..

1528639114 ...... BIOS Version: 1-2-2/1 ......

1528639114 ........ Starting Bono BIOS .......

1528639119 ....d-con drbd0: PingAck did not arrive in time.

ap1906:root > cat /proc/cpuinfo

processor       : 0

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 0

cpu cores       : 6

apicid          : 0

initial apicid  : 0

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat epb dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 1

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 1

cpu cores       : 6

apicid          : 2

initial apicid  : 2

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 2

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 2

cpu cores       : 6

apicid          : 4

initial apicid  : 4

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 3

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 8

cpu cores       : 6

apicid          : 16

initial apicid  : 16

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 4

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 9

cpu cores       : 6

apicid          : 18

initial apicid  : 18

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 5

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 0

siblings        : 6

core id         : 10

cpu cores       : 6

apicid          : 20

initial apicid  : 20

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.85

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 6

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 0

cpu cores       : 6

apicid          : 32

initial apicid  : 32

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 7

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 1

cpu cores       : 6

apicid          : 34

initial apicid  : 34

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 8

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 2

cpu cores       : 6

apicid          : 36

initial apicid  : 36

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 9

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 8

cpu cores       : 6

apicid          : 48

initial apicid  : 48

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 10

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 9

cpu cores       : 6

apicid          : 50

initial apicid  : 50

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

processor       : 11

vendor_id       : GenuineIntel

cpu family      : 6

model           : 44

model name      : Intel(R) Xeon(R) CPU           L5638  @ 2.00GHz

stepping        : 2

cpu MHz         : 1999.928

cache size      : 12288 KB

physical id     : 1

siblings        : 6

core id         : 10

cpu cores       : 6

apicid          : 52

initial apicid  : 52

fpu             : yes

fpu_exception   : yes

cpuid level     : 11

wp              : yes

flags           : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm pcid dca sse4_1 sse4_2 popcnt aes lahf_lm arat dts tpr_shadow vnmi flexpriority ept vpid

bogomips        : 3999.42

clflush size    : 64

cache_alignment : 64

address sizes   : 40 bits physical, 48 bits virtual

power management:

Hi community,

I have the following issue when looking at my IPMI sensors, I noticed that there were a few failure messages.

For the PSU the IPMI reports:

And the PS:

After researching online on what this means and how to resolve the issue I was not really confident on what the actual issue is and how I could fix it.

Already restarted the server multiple times, including longer periods where the server was cut off from any power source.

Does anyone have any information that could lead to success or atleast let me know what the actual error means?

Came in this morning and the server is up and running. There is no video output. The keyboard lights are blinking in a pattern. 2 blinks - pause - one blink - pause - repeat. Keyboard, mouse and monitor all test good. I'm hesitant to reboot.

Any ideas?

While attempting to update the BIOS on an Intel S2600cp server system board I receive an error that says "The capsule file failed in the security compliance check. Please refer to BIOS release notes for details." The BIOS update doesn't complete successfully.

This is happening on two server boards that I just bought both used that that are both currently running BIOS version 1.04.2096.

I am attempting to update to Intel® Server Board S2600CP Firmware Update Package for EFI Version: 02.06.0006 which I have downloaded directly from the Intel website https://downloadcenter.intel.com/download/26957/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?product=61088.

What do I need to do to fix this issue?

I have followed the instructions on the website for creating the bootable flash drive for installing this BIOS update by formatting the drive with the FAT file system and then copying the extracted files directly to the thumb drive.

The flash drive boots fine, provides me with the usual option and I choose option 1 to update the firmware and then option 2 to update the BIOS. Or I get the same error if I choose option 2 to update the BIOS.

I even used the same thumb drive that had this BIOS update on it that I had previously used to update the BIOS on another S2600cp server board (that was running a newer version of the BIOS) and this other server board updated successfully and without any issues at all. Now I am unable to update the BIOS on these two other S2600cp server boards that are running the older BIOS version.

I have recreated this bootable flash drive, have created the bootable flash drive on a different flash drive, have reset the BIOS to the default settings, and have examined the BIOS settings but so far haven't found any solutions that have fixed this issue.

What else can I do to fix this issue so that I can successfully update to this latest version of the BIOS? Do I first need to update to a newer (but not the most recent version of the BIOS) and then I will be able to update to the latest BIOS version?

我最近有3台PXIe8840 在运行win7时发生蓝屏，经分析是由iqvw64e.sys驱动引起的，请问引起这一原因是什么。

我检查了设备管理器的驱动，并没有iqvw64e.sys这个驱动啊

I plan to buy one Intel® Xeon® Gold 6126 Processor, but I don't know if it supports the MBA feature.

As far as I know, the MBA feature is not included on previous Intel® Xeon® Processors E5-xxxx V4, which only supports: MBM, CAT, CMP, CDP.

Thanks,

Steven

Hello,

I have a s5520hc mainboard in a sc5600BRP case.

My issue is that the chassis fans are usually and the psu fans always at 100% load and accordingly very loud (CPU fans not because i use passive coolers).

Im 99% sure that all fan connectors are in the right place for this chassis and this mainboard.

I have installed the newest firmware update with the settings given for this particular chassis and after that i set the the acoustic-settings to 'pls be quiet!'.

I tried to control the fans with 'fancontrol' and 'pwmconfig' on my linux install. There it says that there are no pwm-sensors.

The temperatur of the CPUs are always about 40 degrees.

What i wrote above hasnt solved the issue.

Has anyone an idea how to control the fans and is it at all possible to control the PSU fans?

By the way i have two Intel 750W DPS-750PB PSU's.

Thanks for your answers.

Hello,

if I select Open Loop Thermal Throttling in the BIOS and save and reset the computer the BIOS overrides my selection win CLTT (Closed Loop Thermal Throttling).

I have an issue with the fan control (fans spinning always at 100%) and i found that the problems are the DIMMs wich do not have thermal sensors. If that is the case  the BIOS should not choose CLTT because then the fans are controlled with the RAM temperature as major factor.

Now i tried to select OLTT manually wich didnt work.

My system is this:

Machine:   System: Intel product: TERRA Server v: ....................
           Mobo: Intel model: S5520HC v: E26045-454
           Bios: Intel v: S5500.86B.01.00.0064.050520141428 date: 05/05/2014
CPU(s):    2 Hexa core Intel Xeon X5650s (-HT-MCP-SMP-) cache: 24576 KB 
           clock speeds: max: 2661 MHz 1: 1596 MHz 2: 1729 MHz 3: 1596 MHz
           4: 1729 MHz 5: 1596 MHz 6: 1729 MHz 7: 1862 MHz 8: 1596 MHz
           9: 1596 MHz 10: 1596 MHz 11: 1596 MHz 12: 1596 MHz 13: 1596 MHz
           14: 1596 MHz 15: 1596 MHz 16: 1596 MHz 17: 1596 MHz 18: 1596 MHz
           19: 1596 MHz 20: 1596 MHz 21: 1596 MHz 22: 1596 MHz 23: 1596 MHz
           24: 1596 MHz
Sensors:   System Temperatures: cpu: 45.5C mobo: N/A gpu: 28C
           Fan Speeds (in rpm): cpu: N/A 
//edit: Fan1: 4500rmp, Fan2: 3100rmp, Fan3: 4000rmp 

Help would be nice; that noise my machines makes isnt wholesome.

Hi ...

I have installed Mesh commander 0.6.3 it on a computer with windows 7 since a mini pcs calling system with intel v10 has been implemented in my workplace.

Currently, I have added more than 60 mini-pcs.
They are brand plexus with intel  v10 ...
But 9 of them have been installed with professsional windows7 and when I try to access them with remote desktop it gives me timeout ...

However, about 58 computers with the same hardware but with the fedora linux distribution, I can access by remote control without problems and restart them and interact with the desktop ...


I would have to configure some parameter in the mesh commander or in the minipcs with w7 professional to be able to access by remote control and interact in the desktop as with the linux (fedora)? ....

A thousand thanks...

Hi

Intel® R1304WT2GSR with Adaptec RAID 8405E controller. Can't install Microsoft Windows Server 2012 R2. Do not find RAID drivers.

Tried to use Intel® RSTe AHCI & SCU Software RAID Driver для Windows* (RSTe_and_AHCI_Win_Drivers_GUI_CLI_CIM_4.6.0.1085.zip) - does not help.

What drivers should I use?

How do I identify the correct raid drivers for a Intel® Server Board S5500HCV Family?  It has a ICHx/ESB2 Embedded Raid controller.  Every driver I've downloaded so far doesn't work.  This is for a reload of 2008. 

Thanks! 

Intel is no longer supporting!

I am trying to debug PCI Correctable IPMI SEL Events.

Thanks

Charles