Intel Communities : Discussion List

Recently, I replaced CPU fans on my server machine

The system became much more silent.

However under load system do not increase RPM and do not reduce when system is idle.

I benchmark my system with CPU-Z

When CPU reached the temperature 77C the CPU load drops instead of increasaing RPM

Meanwhile, at CPU temperature 35C and below the FAN RPMs still remains the same

I tried to change FAN profile in BIOS - it didn't help. RPM remains the same.

The question is how to regulate RPM efficiently?

Is there some tool or setting to change RPM range and CPU-FAN-RPM(from-CPU-temperature) dependency

I have P4308CP4MHGC chassis with S2600CP2 Distil 5 motherboard

Hello,

I have an Intel server assembled by EMC using Intel S2600WT Server Board that doesn't detect memory modules, exactly just tested with 2 different Kingston modules.

MB: S2600WT

CPU1: Xeon E5-2620v4

Memory tested:

- Kingston 16GB PC4-2400 CL17 RDIMM (KSM24RD8/16HAI)

- Kingston 16GB PC4-2133 CL15 RDIMM (KVR21R15D4/16)

The memories should work as they match the requirements... but...

The system doesn't boot: does 3 beeps and the LED's shows error code E8 (No Usable Memory Error)

What could be the problem? I know this RAM modules are fine.

Since the system does not boot I can't update the BIOS using EFI shell as it could be a BIOS problem, i located the BIOS flash chip and was wondering where i can find the actual BIOS binary, the releases only contains a cap file (Size: 8 781 904) perhaps the 16MB is for BIOS + Recovery?

The Winbond chip had an sticker with: 0014 (Perhaps it meant that BIOS version is 1.01.0014)

The release notes (Download Intel® Server Board S2600WT BIOS and Firmware Update for EFI) reads:

"B. Use flash programmer to burn the new BIOS ROM image (16MB) into the flash chip." but no more information about the procedure.

Thanks in advance!

Is there a Management Console for multilple intel servers. (Like HP SIM)

Thanks in advance

Hello!

I have a 4U Server Rack or Pedestal Intel P4304\Dual Xeon DP Broadwell-EP E5-2603\Server Board Intel S2600IP

This server has been shut down for a year.

Yesterday I wanted to turn on this server, but server didn't boot.

I change PSU, I change Rack but motherboard is not boot.

I try to clear CMOS and recover BIOS but nothing changed.

Motherboard try to boot, coolers are spinnings little time

Hello all,

Just set up new system for R1208WFTYS and R2224WFTZS after upgrade BIOS version (S2600WF_EFI_BIOSR0014_ME04.00.04.340.0_BMC1.60.56383bef_FRUSDR1.60) and restart system, after that System fan runs too fast and very loud.

Both server system have same motherboard (S2600WFT).

Does any one get the same issue? Please help.

Sincerely,

Brian

Hi all,

I have a question about the NVMe PCIe switch of Wolf Pass.

do this PCIe switch support MCTP?

or when a host sends MCTP to PCIe switch, this switch will pass MCTP to NVMe devices.

Thanks,

Derek

An S2600GL motherboard in my possession died. I'm at a loss as to what went wrong. I understand that the support period is probably expired, not sure about my support options but i figured i'd reach out.

It appears none of the major rails have any issues, but I just get no CPU vcore (it's not shorted, i checked =P), rest of the rails come up for about 0.6-0.9 seconds, it blips the CATERR LED twice, power cycles, then does it again.

Not sure how to continue without reversing the board and reading the C602 and relevant CPU datasheet. I thought it might be fun trying to go further, I figured it might be worthwhile gaining familiarity on a hardware/electrical level with intel server boards.

I enjoyed the level of documentation in the technical product specification, not sure whether there's any further board level information available. I'm curious as to why J4E2 is populated on both boards i have but does not appear to be mentioned anywhere?

I've used another board and verified the RAM, CPU's and PSU's are fine. BMC boots on the faulty board if that helps.

At a glance it appears the S2600WFQ, S2600WFT, S2600WF0 and S2600WT have the same/similar mechanical specifications? I'd like to confirm that's an upgrade path if boards keep dying?

Cheers.

Ed: grammar.

Is there a CIM/SMI-S Provider for RMS3AC160 under ESXi 6.7 ?

I cant get any also on the LSI/Broadcom website.

Thanks in advance

I installed on a S2600WTTR (Bios: SE5C610.86B.01.01.0027.071020182329 / CPU Intel(R) Xeon(R) CPU E5-2660 v4 @ 2.00GHz)

ESXi 6.7. (6.7.0 (Build 10176752))

Now i see that some Sensors are unknown.

But on the VMWare Compatibility Guid the System shod be ESXi 6.7 compliant:

Intel S2600WTT Intel Xeon E5-2600-v4 Series ESXi 6.7,ESXi 6.5 U2,ESXi 6.5 U1,ESXi 6.5,ESXi 6.0 U3,ESXi 6.0 U2,ESXi 6.0 U1

https://www.vmware.com/resources/compatibility/pdf/vi_systems_guide.pdf

Have i missed something ?

We have a S1200SPOR with RMS3CC080, the below document on page 6 (real PDF page 16) says this controller (and all others that are 12Gb) will:

"Online capacity expansion to add space to an existing drive or a new drive"

"Online RAID level migration"

https://www.intel.com/content/dam/support/us/en/documents/server-products/raid-products/12G_RAID_Controllers_UG.pdf

Ive completed both of the above before with PROMISE controllers and LSI / AVAGO, however i can find anyway in the BIOS or with RWC3 (RAID Web Console 3) to do this, when i select the Virtual Drive there are no options to expand or change the RAID level.

So how is this done?

Hello!

My Raidcontroller SRCSASRB died! It is the second controller in this server which says Memory Error!

I'm unable to source this controller so i would like to know if the array could be read/mounted with a SRCSATAWB!?

I hope someone can help me out!

Last time the controller died john_s@intel was very helpfull - but i dont know if he's still in the forum!?

Best regrads,

Florian

We have a few S2600WTTR servers, and the Amber light is flashing once every second on one of them.

Nothing of consequence in the event log, and server seems happy.

How's the best way to diagnose this?

I'll attach a debug log to this post.

Thanks.

Hello!

We have another server with this strange issue.

Server started to give RAID card overheating errors. But in reality it is not true.

We changed RAID card to a new one - still the same problem.

Motherboard is S2600CW2.

RAID controller logs attached. and RAID controller FW is the latest available.

How to fix it?

P.S::

We had familiar problem with S2600WT board and problem started in the same way but then another problem appeared with battery controller.

RS3DC040 RAID controller started to beep with battery module

Hi guys,

i need help. We have the intel mainboard S2600GZ and our supplier says to us, that we need the BIOS Version 01.01.1002 for the CPU Upgrade. On the Intel Download Site i can't find this Version of BIOS. By other Version the server show no screen and no BIOS. The server starts only with E5-2640 CPU by each BIOS Version of the Intel Site. Have anyone this special Version?

Thanks!

아산출장안마 【카톡:PG52】아산출장샵 《 BN53,NET 》아산콜걸 외국인출장업소 Bn출장안마 아산콜걸샵(())분수쇼콜걸만남(())아산출장마사지(())20대서비스(())아산출장샵추천(())아산콜걸후기출장업소

논산출장샵추천 카톡:Dio37 논산콜걸 홈피≫【 dio21,net 】논산출장안마$$외국인콜걸샵 논산출장업소 여대생콜걸추천$$미시출장만남R$$논산출장마사지논산콜걸논산출장샵강추 논산출장샵서비스

밀양출장샵 카톡:Dio34 밀양콜걸 주소≫【 dio21,net 】외국인출장안마 밀양여대생콜걸샵 밀양콜걸추천 밀양콜걸만남(ボ)밀양미시콜걸업소밀양분수쇼출장샵추천밀양출장마사지밀양출장샵가격콜걸샵

은평출장안마≫【카톡:PG53】은평출장샵｛ BN52,NET ｝은평콜걸(M)일본인콜걸업소 M2콜걸 여대생출장만남(M)은평출장서비스(M)은평출장샵강추 은평출장샵추천 은평콜걸후기 모텔출장

이천출장샵 【카톡:PG53】이천콜걸【 BN52,NET 】일본인출장만남 M2출장샵후기 이천출장안마 M2콜걸 이천콜걸E@@분수쇼출장업소@@출장마사지@@20대서비스@@이천출장샵추천출장안마

부산출장안마≫【카톡:PG53】부산출장샵｛ BN52,NET ｝부산콜걸^^일본인콜걸업소 M2콜걸 여대생출장만남^^부산출장서비스^^부산출장샵강추 부산출장샵추천 부산콜걸후기 출장업소

How to set up new RPM range for CPU FANs?

S2600WT - No Usable Memory Error (0xE8) - BIOS ROM Flash

Manage and Monitor multiple Intel Servers in a Console

S2600IP not boot

After upgrade BIOS version for R1208WFTYS and R2224WFTZS, System Fan Runs Too Loud and Too Fast

the NVMe PCIe switch of Wolf Pass

S2600GL CATERR Debugging

RMS3AC160 ESXi 6.7 CIM/SMI-S Provider

S2600WTT / ESXi 6.7

Intel RAID (RMS3CC080), how to "Online RAID Expansion", cant find it in BIOS or RWC3

Raid SRCSASRB died!

S2600WTTR has Amber flashing warning light, but nothing listed in Event Logs - How can i diagnose?

RS3DC040 overheating warnings again

CPU Upgrade E5-2640 to E5-2650 V2