Clik here to view.
Are AXXRMM4LITE2 and AXXRMM4LITE modules interchangeable and are compatible...
I'm planning to build an entry-level file server with S1200SPS or S1200SPL board and KVM over network. Some specifications are not clear to me. (1)Both AXXRMM4LITE2 and AXXRMM4LITE modules are listed...
View Articleintel e3-1200
hello everybody.. i'm newbie in here, may i have a question with my pc server:spesification: intel server board S1200v3rps, intel xeon E3-1200 v4, DDR 8Gb, harddrive 1Tb, with dual onboard nic - how...
View ArticleINTEL RMS25JB080 does not see hdd SEAGATE ST2000NM0045
Good afternoon, INTEL RMS25JB080 does not see hdd SEAGATE ST2000NM0045. HDD sas3 in it can be a problem? And perhaps in the future supports of these devices in the SAS2 mode?
View ArticleDell T110 II S100 PERC identifies new HDD as an SSD - can't move forward
This is a Dell T110 II running Windows Server 2008 R2 with PERC S100/S300 RAID 5.One of the HDDs was taken out of the 3-skik array and is now running DEGRADED. I removed the old HDD and replaced it...
View ArticleClik here to view.
S1400FP4 ac on power supply = solid amber Status LED + blinking blue ID LED -...
Dear community, finally I got some time to setup my 2 years old S1400FP4 mainboard into a server. After finishing cpu, cooler, fans, some ram and the power supply I started a first boot for testing...
View ArticleClik here to view.
input voltage requirement for S7200AP
Hello, I am a research assistant at a university, I am trying to build a server rack for a power delivery research project. I am going to build my own power supply and ups combination for the server...
View ArticleClik here to view.
Intel software RAID to hardware RAID
Hi, I used Google and found this: Intel software RAID to hardware RAIDI use a GIGABYTE H87M-HD3 with Intel H87 (Lynx Point) at the moment (5 HDD, Raid 5, Intel RST).I bought an Intel RS3DC080 today. Is...
View ArticleClik here to view.
Failure: S3420GPV cannot handle Hard Drives larger than 2TB in AHCI Mode
Hello, we urgently need help... any ideas?we have Problems with two identical 4TB harddisks. we use the harddisks only for datastorage, no booting. No RAID. Only AHCI mode! The server recognize the 4TB...
View ArticleRS2SG244 "latest" firmware, v12.14.0-0185 or 12.13.0-0105 ?
RS2SG244 with 22 SATA drives connected. Updated to "latest" firmware, v12.14.0-0185 now half the drives don't appear. Then I noticed that there is a "High port count" firmware which is only at version...
View ArticleIs it possible to update bios on S2600CP from BIOS Version...
...found here https://downloadcenter.intel.com/download/26296/Intel-Server-Board-S2600CP-Firmware-Update-Package-for-EFI?v=tI can't see any specific requirements in description but my BIOS is really...
View ArticleClik here to view.
No BMC firmware installed
I have Server board S5520HCR. The BMC firmware does not appear to be installed. I have attempted to install various firmware packages, but they all leave the board unable to boot (nothing on the...
View ArticleClik here to view.
S3420GPV RAM options (very confused)
I've been looking to build a server and I have an S3420GPV which I want to use, however the RAM requirements are extremely confusing for me. On the technical document, it says no support for x4 or x16...
View Articlemfsys25 sd broken
Hello,I have Blade Servers on MFSYS25, and sd card on midplane is broken.For new sd card, In CMM EBF "sd format" not work,How make new sd for midplane?
View ArticleS2600CW slow BIOS POST
I have a system based on an Intel S2600CW server board (2x Xeon E5-2699 v4, 160 GB memory). My problem is that it takes very long time to boot up. From the moment I press the power button, it's about 1...
View ArticleWhere to download ESRT2 driver for virtuozzo 6 on Intel Server Board S1200BTL?
I'm trying to setup virtuozzo 6 on a Intel Server System R1304BTLSHBNR (Board S1200BTL) via embedded raid (Intel ESRT2).I already tried the drivers for rhel from the downloadcenter dated January 16 but...
View Articles2600gz usb boot impossible to install Windows Server 2012
Hi Everyone, I have a server with this motherboard installed ( Intel S2600GZ ). I wiped all the informations on the HDD and recreated two fully new RAID10 , 550GB each one. After creation of the...
View ArticleBMC didn't working
Good day.I have a problem with BMC. We bought intel server with S2600CP motherboard. i configure bmc with using this instruction...
View ArticleClik here to view.
How can I change the terminal escape sequence for system1/sol1 on a RMM4?
2 of my RMM4 came with ^C instead of the usual ~. as the terminal escape sequence of sol1. How can I change this back? Every helpful reply is highly appreciated.
View Article