Clik here to view.
S1200V3RPM no boot after BIOS update
I upgraded the BIOS of my S1200V3RPM (XEON E3 1265L V3) to 3.03.0006To do this, I insterted a USB stick with the new BIOS, booted to the internal EFI shell and then the BIOS upgrade started by itself....
View ArticleClik here to view.
Intel Server Board S1200V3RP
Проблемы с запуском материнской платы Intel Server Board S1200V3RP. Конфигурация ПК: 1) Minitower Chieftec LT-01B-OP. 2) Intel core i3-4370 3.8 GHz. 3) Kingston HyperX в Fury <HX318C10FRK2/16> 4)...
View ArticleClik here to view.
Motherboard intel s2600sw
Hello. Motherboard intel s2600sw. Trying to install windows (server 2012 r2,10,8.1) , it hangs at the stage bootloader of the system.The installation of Windows 7 and Windows server 2008 R2 runs fine ....
View ArticleClik here to view.
Intel® Server System R2312WTTYSR and Hyper-V
Hello!I have problem with hyper-v. I try to install VM on Windows Server 2012 R2 or Windows 10 and the VM is "hung".The OS is clear. OS on the server - Windows Server 2012 R2System BIOS -...
View ArticleIntel R2312WTTYSR BIOS
Hello!I have Intel R2312WTTYSR. I cannot downgrade bios version. I tried to downgrade via shell and ofu. And i used different version firmware (01.01.0014, 01.01.0015, 01.01.0016). The shell and ofu...
View ArticleRails on Intel Server P4308CP4MHEN
Hi there, I have a P4308CP4MHEN Intel Server System that I would like to put in a rack, do I need anything else than Enhanced Value RAIL AXXELVRAIL? Best regards,Klemmi
View ArticleClik here to view.
UEFI mode
Hello!I have Intel® Server Board S2600WTTR.For UEFI mode, how to create bootable usb with Windows server 2012 R2 and what kind of settings i must do in BIOS?
View Articlesmash-clp turn on the system
I ssh into a s2600wt BMC and I want to turn on the system via SMASH-CLP console. show system1/pwrmanagement1 returns the property of CurrentPowerState set system1/pwrmanagement1 CurrentPowerStatus=ON...
View ArticleS2600CP motherboard swap how to transfer RAID1
Hello from Brussels,We will switch from a failed S2600CP to a new S2600CP that will (hopefully) be received this Monday.Is it a procedure to transfer the RAID1 containers without loosing all the data...
View ArticleS5520HC Memory
I have a S5520HC system with dual E5520 Xeons and I want to upgrade the memory to 64GB. I have 8x 8GB RAM sticks, will they work in that configuration?
View ArticleClik here to view.
"PCIe Cor Sensor" error on S2600CP2J
Hello, I have a problem in my S2600CP2J board, firstly I installed a GPU (MSI GTX 760 OC) on the x8 blue PCIe slot the second one after the x16 slot, when monitor connected with the new GPU, the screen...
View ArticleClik here to view.
Server R2308WTTYSR + RAID-card, remove cable HSBP I2C from MB?
Hi!RAID-controller (9271-8i) connected to a backplane using two cables "SFF-8087 to SFF-8643". Should I remove HSBP I2C cable from MB to backplane??? As I understand it, this cable is only for the...
View ArticleSRCSATAWB 4 beeps
Hi.I have a SRCSATAWB on S5000VSA. After shutdown, and powering on controller (SRCSATAWB) didn't initialize, not in bios (loading process), not in windows.It immediately, after powering on, beeping and...
View ArticleClik here to view.
Firmware update to SAS drives connected to RS2BL040
How do I update SAS drive firmware when the drives are attached to a RS2BL040? I don't see this capability in RWC2 or the RAID BIOS. I have 4 Seagate drives, but one is down 1 firmware revision...
View ArticleClik here to view.
S1200SPL can't connect to COM (RS-232) device (APC Smart-UPS SC620VA).
Serial port is enabled in BIOS.The same device with the same cable successfully connected to another motherboad (asus z97-a), so device problem is excluded. Tried Win2012,Win2008R2,Win8.1Should I...
View ArticleDoes Server board S1200V3RP have the driver (especially for embedded raid) to...
I have a server system (S1200V3RP with E3-1200V3), I try to install windows server 2016 to upgrade the server, but can't find the driver for embedded raid driver, so I can go on for further installation.
View ArticleClik here to view.
motherboard s1200rp for p4600 procesor graphics support
HI there , a year ago i brought s1200rp motherboard for e3 1246 v3 processor which has processor graphics (p4600). but, motherboard i brought does not support it. [1]--- i need to know which...
View ArticleNo access RAID options on boot (Intel RSTe)
Hi,I have a problem with a S2600gz server.I can't access RAID options on boot. I don't see key combination to make. I follow this article : Not Prompted to Enter the Intel® RAID BIOS Console During...
View ArticleClik here to view.
Extract 1 processor from 2 processors system
Good day. I have a server R1304GZ4GC with 2 processors. If i want to extract one of them what will i have to do except extraction, of course. After i'd done this coolers started to fan with maximum...
View ArticleBarebone Intel R2208WTTYC1R FANS PROBLEM WORKFLOW
Hi I have a problem with Barebone Intel R2208WTTYC1R I don't know what I doing for have to control of the FANS. When the SO (Windows, Xen, CentOS...) is installed, the FANs have a null workflow ,...
View Article