E-mail notifications in RAID Web Console 2
Hello, few months ago I bought the Intel SRCSATAWB RAID controller which has been working fine so far (except one of the breakout cables which was damaged upon arrival). I have set up everything to my...
View ArticleS1200BTL LED CODES
Hi,I have a non booting s1200btl which stops in boot process with no display and following LED Status ID Blue LED = off STATUS LED= Green then after about 1 minute flashing amberLEDS: MSB...
View ArticleRaid Web Console 2
I'm having issues Sending SMTP Mail thorugh the Raid Web Console. I been using the Raid Web Console and Intel RAID Card for years, but it always seems like it's hit or miss with the console. Sometimes...
View ArticleIntel P4308CP4MHGC graphics card w/ 6-pin power
Hi, what is the proper way of attaching and using a graphics card on P4308CPMHGC if the card has a 6-pin power connector?There's only a single 4-pin cord available out-of-the box, and also 4 other...
View ArticleRaid config for S2600CW2 Server Board with FUP8X25S3HSDK 8x2.5 Hot Swap Drive...
I'm trying to install the S2600CW2 board in the P4304XXMFEN2 Server Chassis, using the 8x2.5 Hot Swap Drive Cage Kit FUP8x25S3HSDK, and the AXXCBL380HDHD mini-SAS cable(s).Problem is the embedded Raid...
View Article1-wire temperature sensor
Hello, I'm working with Intel Server Board S1200RPM. I want to add a temperature sensor (Dallas DS18S20) to the front panel SSI connector. It appears in the specs (in the 24-pin EEB SSI connector...
View ArticleGetting "Flash downloaded image corrupt" trying to upgrade a RS2BL040 RAID...
Getting "Flash downloaded image corrupt" trying to upgrade a RS2BL040 RAID controller with current firmware 2.003-0673 from packet 12.0.1-057 July 25 2009. I have downloaded versions...
View ArticleClik here to view.
W2600CR2 / C602
I cannot seem to get 2 Radeon 290X video cards to link up in the primary and secondary x16 slots ( Bottom and next one up ). They both are recognized and display separately however they will not form a...
View ArticleClik here to view.
S1200BTL Beep Code Help
Hi Guys I have a intel s1200btl server board that does not boot.I receive a beep sequence 1 5 4 4. What do i need to do to resolve the issue? Regards
View ArticleS1200BTLR with AXXRMS2AF040 drives dropping off line unexpected sense
Hi I have a S1200BTLR server with the RAID controller AXXRMS2AF040 installed running Windows 2008r2, for no apparent reason drives drop off line with unexpected sense errors recorded in the Web...
View ArticleClik here to view.
MFSYS25 Firmware Problem
I have a MFSYS25 that has been mistakenly updated to firmware version 11.6. How can I downgrade it to 6.10? I used EBF to ftp the 6.10 cmm_core.zip file to the CMM, but I get an error about the...
View ArticleClik here to view.
RS3 RAID and Samsung SSD problem
Server 1: R1000GZ server system + RS3DC080 controller with BBU + Samsung 850 EVO SSD disks: working fine.Server 2: R1000WT server system + RS3DC080 controller with BBU + regular 10krpm SATA disks +...
View ArticleClik here to view.
Intel Modular Server MFSYS25 2. Switch geht in den Zustand "Unmanageable"
Ich habe auf den oben genannten Server auf einem Mainboard (Server1) die Mezzanine-Karte und in den Blade den 2 Intel® Gigabit-Ethernet-Switch AXXSW1GB verbaut.Alles funktioniert nur zeitweise, nach...
View ArticleClik here to view.
DirectPDMapping
I looked at the CMDTool2 manual for the RMT3CB080 Raid controller and found the syntax to change the DirectPDMapping setting, default is off. Every time I issue the command to turn it on I get an exit...
View ArticleAsus z9pe-d8 WS SATA/SCU raid 5 failed after upgrade to WIN 10 pro from win7....
Have pulled drives from sas/sata/scu port and moved to the 6 sata ports available, with intel raid still enabled in bios. Still showing array as raid, and bios shows 3 member hdd and the last...
View ArticleHow do I recover a corrupt bios after a firmware update on a Intel S2600IP ?
Hi all, I'm very much new here. I had acquired a nice intel server that has a S2600IP... for days i've been trying to install an operating system on this and ran into very slow installations of...
View ArticleRWC2 v14 cannot find server. RWC2 v2 worked. What can be the difference?
RWC2 v14 on module RMS25PB080 & Motherboard 2600CP with OS WinServer 2012 R2 in HyperV cannot find server. RWC2 v2 worked. What can be the difference?
View ArticleClik here to view.
Intel S5000PSL problem
Hi, I have problem with PC with this motherboard. It kinda strange shuts down few seconds after it's turned on. When I replace the CMOS battery it again shuts down but it takes more time. What could be...
View ArticleSB1200BTLR and Xeon v3
Hi, We have an S1200BTLR board, version G21110-353. We have asked for a compatible CPU and have been sent the Xeon E3-1220v3. The Server Products — Tested Processor List does not list any v3 processors...
View ArticleC226 chipset E3-1265L v4 Iris Pro Graphics P6300
Hello. lspci command does not see integrated IRIS graphic from Linux (Centos7, SystemRescueCD4)I upgraded BIOS for latest version for S1200V3RPM motherboard for compatibility with E3-1265L v4 processor...
View Article