Clik here to view.
raw ipmi command to retrieve NIC 1 MAC address on S2600GZ
Hi there, what is the right approach to retrieve the NIC 1 MAC address (for OS usage) via IPMI? NOTE: I am assuming the system is powered off and that a DHCP server assigned an IP address to the BMC...
View ArticleS1200V3RPM beeps during POST
HiI have a S1200V3RPM which beeps in a strange way during POST.The beeps are like this: '''------' (three short high, six long medium, one short high)When Windows Server 2012 R2 boots it reports that...
View Articlemotherboard se7230nh1-r and hard disk over 2TB
Hi everybody! Anybody know is se7230nh1-e mb support hard disk over 2Tb? I want to use 4Tb drives, but not sure that mb detect its.
View ArticleClik here to view.
USB Error with S3420GP Board
I've been struggling with this S3420GPLX board with Xeon 3470. The setup is: S3420GPLX (latest BIOS) with SCROMBSASMR RAID, SC5650UP/AXX6DRV3GEXP drive cageATI video PCI-e320GB drive as testing drive,...
View ArticleRaid 10 with 2 failed drives
I just like know if it is possible for raid 10 with 4 drives to boot up if 2 out of 4 drives fails?
View Articleплата intel s3420gpc и hdd SATA 3Tb
Плата intel s3420gpc (так она определила себя в биос).Кто тестировал на совместимость с дисками SATA 3Tb? лучшее, что нашел...
View ArticleClik here to view.
RMM 3 command line status check
I've got a few devices that have RMM loaded. I know it's an intel rmm and pretty sure it's RMM3. What I don't know is what is the IP of the device and how to get it from just the command line. I can...
View ArticleRAID 0 to RAID 5
I have 2 terabyte drives in a RAID 0 config. It has Intel Rapid Storage Technology Enterprise Software and an Intel C600 Series Chipset SATA RAID Controller. I have a new drive on the way, What will I...
View ArticleClik here to view.
S1200V3RPL: "bmclibinitialized returned failed" after BMC update to 01.12.7499
I updated an S1200V3RPL board to the latest BMC release 1.12.7499 via UEFI using the software provided by this link: Intel® Download Center [1] After the update, I wanted to change the SDR. Because...
View ArticleTeaming NIC PRO 1000/MT in windows Server 2008 R2
The Intel PRO 1000/MT has (today ?) no "full support" in Windows Server 2008 R2 ; that is : each NIC est recognized by OS and functionnal, but we can't built a team, because Intel Advanced Network...
View ArticlePossible to Turn Off Server Beeping?
I posted early about the USB error with Intel S3420GP board. The beeping is very loud. It also beeps with many other events, a lot of them (like the false USB device error) are not even critical.
View ArticleClik here to view.
r1000rpo cannot install chipset driver
Trying to install chipset driver on Hyper-v Server 2012 r2, error says system does not meet minimum requirements, 16GB of Ram, and a 3.3Ghz E3 processor. The last time I did one it worked fine from...
View ArticleClik here to view.
S5000PSL no longer booting
Hi Please can someone help I have a Server which has been working for about three running a S5000psl board for years with no problems. Recently 2 of the drive no longer being used were removed from...
View ArticleXeon Phi with no Bracket
I got a Xeon Phi off of amazon a few weeks back and the supplier didn't provide a PCI bracket for it. I asked the supplier for hemp and they didn't... I have searched all over for one and cant find one...
View ArticleVDs on S1200BTL & Windows 7
Hello, My end goal is this: Set up RAID 10 on 4 HDDs with Windows 7 Pro. This is similar to this post, but I'm having trouble implementing the answer. Here is the situation: System:...
View ArticleClik here to view.
Intel SS4200-E - 4 drives failed after power outage - help me get my data back
I've got an Intel easynas 4200-E with 4 1.5TB disks in it in a RAID5. Today we had a power outage, but the NAS stayed on during the brief outage, as it was connected to a UPS. When I came and...
View ArticleRaid 10 with 2 failed drives
I just like know if it is possible for raid 10 with 4 drives to boot up if 2 out of 4 drives fails?
View ArticleRS2WC080 on DQ67SW
Hello everyone, I have an Intel DQ67SW motherboard and an RS2WC080 raid card. I have not used the raid card in over a year (it was properly stored back in it's original box/packaging. and was working...
View ArticleServer Board S3420GP RAM Configuration
Hello, I have a problem with my S3420GP Board by using M393B5170DZ1-CF8 RAM Modules. After Installing one or two RAM Modules I get 3 beeps, which indicates an incorrect RAM Configuration. By reading...
View ArticleIntel Active System Console and Windows Server 2008 R2 Hyper-V Core
Dear Intel Community, We've taken on a new client that has existing Intel Hardware, which has Windows Server 2008 R2 Hyper-V Core Edition installed. I would like to get Intel Active System Console...
View Article