RAID of 5 disks on the R1208WTTGSR
I can not configure a software RAID of 5 disks on the R1208WTTGSR platform. Need raid 10 + 1 hot spare. In the BIOS, sata (0-3 port) and ssata (0-3 port) are available. It turns out that 2 different...
View Articles1200spl fan spin to slow
Hello, my Intel S1200SPL is in a third party case an I got problems with the fan speed. I have two PWM fans and one with 3 pin.The Fans with PWM spin to slow and the 3 pin fan spin withe 100%. How can...
View ArticleIntel RAID Web Console 3 - how do we add servers to the GATEWAY server
Hi, downloaded RAID Web Console 3 from here Download Intel® RAID Web Console 3 for Windows* - Install the GATEWAY server on a remote machine, can log in ok.- Installed the RAID driver version (SAS...
View ArticleS2600WT2R Motherboard onboard nic
The onboard nic cards just quit working. Vendor wants to replace entire server because of the contract agreement we have with them. (a whole other story). How does one go about getting warranty...
View ArticleBMC server health amber
Hi, In the BMC panel we have server health status blinking in amber state (failure) but all sensors state to OK.What can be an issue for this ? Br,
View ArticleS1200SPLR - SAS Module Compatibilty Questions
Hi, I'm using a S1200SPLR board with an E3-1245v6 CPU (latest Firmware version 03.01.1029 installed) I'm looking for the most basic SAS Module option with SAS 12 Gbps ports (that can operate without...
View ArticleS1200BTSR connects cooler but no picture and no beep.
First of all I apologize for incorrect English, I'm using google translator. I have a s1200btsr with Xeon processor, it was working normally, suddenly it started to make a strange noise like it had a...
View ArticleM.2 PCIe SSD in S2600BPB
Hello, I have a Buchanan Pass system with the S2600BPB motherboard (XXLRE chassis, HNS2600BPB compute module). An Intel PCIe M.2 SSD is attached to riser slot 2 (back). However, the SSD is not visible...
View ArticleWhen can we expect server board firmware updates for the recent vulnerabilities?
Unless I am just not searching your support site properly, I have not been able to find any server firmware updates to address the microcode updates for Meltdown or Spectre or even any notification of...
View ArticleBMC LAN MAC Adress 00:00:00:00:00:00
Hello, I have configured my BMC LAN for a static configuration using ipmitool. Once I was done I tried pinging it and didn't get a response. I noticed that my mac address was 00:00:00:00:00:00 but...
View ArticleHow to set up mail reminder in Intel RSTe?
I use Intel's dual-server server S2600CP2 and Windows Server 2008 R2 operating systems. After installing the INTEL RSTE GUI, when setting up a mail reminder, after entering the SMTP mail server address...
View ArticleIntel Embedded Server RAID Technology 2 is not visible under the Advanced tab
I use Intel's dual server S2600CP2 and Windows Server 2008 R2 operating systems. When I set up boot from EFI, Intel Embedded Server RAID Technology 2 could not be found under the Advanced Tab in BIOS,...
View ArticleS1200SPOR External (PCI-e) display adapter not working
Hi We have connected a PCI-e display adapter (nVidia) inside this server, Windows 10 does not see any new hardware, we do not get any video from this adapter (on boot or Windows), we have the BIOS...
View ArticleIntel RAID (RMS3CC080), how to "Online RAID Expansion", cant find it in BIOS...
Hi We have a S1200SPOR with RMS3CC080, the below document on page 6 (real PDF page 16) says this controller (and all others that are 12Gb) will: "Online capacity expansion to add space to an existing...
View ArticleRWC3 doesn't accept notification email addresses which contains "-"
Hello, I want to setup email notification in RWC3 and I'm not able to configure email addresses which contains "-" . I receive an error "Please enter a valid email id".Is there a fix for this? Thank you!
View ArticleS2600CP Windows 10 watchdog driver
Good Day.I am tried enable "OS boot watchdog timer" at BIOS, but my OS (Window 10 - 1709) always rebooted.I didnt find Intel Watchdog driver and i dont understand how i should install it.I am really...
View ArticleIpmitool lan print 1 returns Invalid channel: 1
Prior to replacing the 3V battery on the mother board, this command: "Ipmitool lan print 1" returned useful information. Now the command returns: Invalid channel: 1.Did I lose a configuration setting...
View ArticleRAID of 5 disks on the R1208WTTGSR
I can not configure a software RAID of 5 disks on the R1208WTTGSR platform. Need raid 10 + 1 hot spare. In the BIOS, sata (0-3 port) and ssata (0-3 port) are available. It turns out that 2 different...
View ArticleS1200BTSR connects cooler but no picture and no beep.
First of all I apologize for incorrect English, I'm using google translator. I have a s1200btsr with Xeon processor, it was working normally, suddenly it started to make a strange noise like it had a...
View ArticleIntel® Server Board S1200SPL and Intel Xeon E3-1245 v5
I have a problem. Don´t work. I'm trying connect hardware but the motherboard beats, is it incompatible?
View Article