Hi.
I have a S5000VSA board where the CPU fan goes at full speed 24/7.
The board is in a non-intel chassis
I have tried to update the bios and reset it to defaults. (via jumper on the board and in the bios)
I have also set in BIOS - Throttling Mode [Auto] / Altitude [300m or less] / Set Fan Profile [Acoustic]
The chassis intrusion juper is shorted.
Ony one cpu/fan is installed.
On power on the fan goes to 100%, then throttles down to "quiet mode" and then up to full speed, and stays there.
Any ideas on how to adjust the speed?