We have a server used the 2600STB. When installing 2016 Server there are a total of 4 NICS showing in the Device Manager.
2 of the NICs install fine. 2 are showing as code 10 in the Device Manager
There are only 2 NICs on the machine. There is no expansion (or any cards in slot 5) card to enable the other 2 NICs. They are flagged in the Device Manager and I can not figure out how to make them go away.
The BIOS/ BMC/ FDRFSU was update to the latest on the Intel site as of 1.22. The last drivers are installed. But the code 10 is telling me the hardware can't be found. Which is correct because it's not there
I've read you can disable the NICs if the machine is installed it UEFI (Which it is) but this disabled all 4 NICs.
There is only one reference to 'NICs' in the BIOS..which also disables all of them
Any help on this?