Hello all from Intel Community
Im new to this motherboard . So apologize for newbee questions !!
Im running a Intel s2600cp . After installing 01 cpu E5-2643 , board was OK powering on , and BOOTING
regularly , Im using APEVIA Warlok 1.100 w PSU .
board is on its first BIOS version SE5c600.86B.01.02.0003
Setup utility Megatrend version 2.00.1201
BMC firmware 1.04.2896
sdr version : SDR package 1.10
ME firmware 2.1.7.112
Information collected when I was able to boot .
I was on my way to Install Windows 10 on a Samsung SSD , suddenly system stopped
Since then I have all LED ( dimm , Fan , etc ) in Amber Color ,
and A / B ( system and id leds ) led does not lit anymore , no beep ,
nothing happens when powering on , just the AMBER leds lit .
No fans , nothing . No boot .
it seems that theres NO power achieving the board properlly
for some reason , my PSU remains quiet even after turning on the
power I/O buttons .
I checked my PSU its OK . Unplugged everything from the board but the CPU ,
tried to reset CMOS , changed CMOS battery , reset BIOS jumper
following page 100 board manual ( "clearing CMOS" procedure ) .
Removed all RAM sticks , theres no ext video card installed .
I´ve tried to remove power connector from PSU to the board , with no luck.
any help on how can I bring it back to Life .... is really appreciated !!!
G. Ollana