Hello there,
I had a lovely working server until today, I wanted to add a internal ssd into the case so I had to get the power supply for it. There is a OSD connector there for power so I found a thread on how to get a cable ffor this connector as there not available to buy now. I followed this guide to make up my cable
https://communities.intel.com/thread/36313
In hind sight I should of got the multimeter out and checked the voltages myself as its obvious something has short circuited.
Upon plugging in a hard drive the server turned off with a bunch of beeps, I have tried to power on the server several times with the same set of beeps. I had the reduntant power supply disconnected at the time and that does not help either.
I am able to access the BMC and gather the sensor reading and shows the following messages
Pwr Unit Status | reports there has been a soft power control failure reports the power unit has suffered a failure | Critical | 0x0060 |
Pwr Unit Redund | reports redundancy has been lost reports redundancy has been lost and there are insufficient resources to maintain normal operation | Critical | 0x0022 |
PS1 Status | reports the power supply's presence has been detected reports the power supply has suffered a failure reports a predictive failure has been detected for the power supply | Critical | 0x0007 |
PS2 Status | reports the power supply's presence has been detected reports the power supply's input (AC/DC) has been lost | Critical | 0x0009 |
Is there a reset procedure I can do or have I fried the motherboard?
Any help would be appreciated.
Thanks
Craig Dabbs
Clik here to view.