I updated the BIOS on the s2600cp2 board from version 01.02.0003 to 02.06.0002. Its a pretty big jump but the notes said it was compatible. Now the system stays on the first screen that displays "Intel Corp... BIOS version... ect." I've left it running for as long as 30 minutes, nothing happens. I want to try to go back to 01.02.0003, which I can still download from the website but there aren't any recovery files. So instead I tried to do a BIOS recovery to any of the versions that give the BIOS recovery files for, which go back to version 02.02.0002. I moved the recovery jumper to pin 2 and 3 with the machine unplugged, plugged in the USB with the recovery files, and started it up. Most I got was the system LED blinking amber and no other error leds, which the screen just displaying the same first screen, two beeps and USB gets power then the USB light shuts off then screen goes black for a brief moment then repeats this loop. Left it going for 10 minutes and still nothing. I believe the EFI Shell should load, but I don't even get an option to get there. I tried hitting F2 and F6 to see if maybe that would work, nope. Is there another way I can go about this?
↧